Transcript
S P E C F I L E Network Board for DLP™-Based Projector ET-MD77NT This board is designed for use with the DLP™-based projectors. It enables remote control of the projector and transmission of still images to the projector from a PC on a LAN via a Web browser. NOTE: Please use the module only on the specified Panasonic DLP™-based projector. Specifications Power supply: Power consumption: Terminals: LAN: Dimensions (W x H x D): Weight: Operating temperature: Operating humidity: Provided from the DLP™-based projector Projector power consumption increases approximately 5 W RJ-45 x 1, 10Base-T/100Base-TX for network connection 204 x 32 x 214 mm (8-1/32˝ x 1-1/4˝ x 8-7/16˝) 280 g (10.2 lbs.) 0°C – 40°C 10% – 80% (no condensation) Weights and dimensions shown are approximate. Specifications subject to change without notice. Digital Light Processing and DLP are trademarks of Texas Instruments. Dimensions 32 (1-1/4˝) 214 (8-7/16˝) unit: mm (Dimensions given in inches are approximate.) 204 (8-1/32˝) Note: This illustration is not drawn to scale. As of April 2005 1