Download Conteg DP-KP-KAR rack accessory
Transcript
CONTEG SOLUTIONS for the next decade! CONTEG DATA SHEET version: 27-09-2010 ACCESSORIES CABLE PROTECTION IN OPENINGS CONTEG, spol. s r.o. Headquarters Czech Republic: Na Vítězné pláni 1719/4 140 00 Prague 4 1 Tel.: +420 261 219 182 Fax: +420 261 219 192 [email protected] www.conteg.com Local Offices: Austria: Benelux: Eastern Europe: France: Germany: Russia: +43 699 1819 7071 +32 477 957 126 +49 172 848 4346 +33 686 074 386 +49 170 523 4958 +7 495 506 1328 ...to complete your network CONTEG SOLUTIONS for the next decade! CABLE PROTECTION IN OPENINGS DESCRIPTION: • Installed in cable entry openings (300x100mm) • Mounting holes for wall installation on the back Code Description DP-KP-LEM Rubber piece on edges of cable entries (length 790mm) for free-standing racks DP-KP-HCE Hermetic dust-proof panel for IP54 racks, ready for 24x 12,6mm and 10x 10,5mm cable openings DP-KP-KAR Dust-proof panel with brush - for free-standing racks DP-KP-KAR3 Dust-proof panel with brush - for wall-mounting racks DP-KP-KAR4 Dust-proof panel with double brush - for free-standing racks DP-KP-KAR4-D Divided dust proof panel with double brush - for freestanding racks DP-KP-KAR-A Dust-proof panel with double brush - for raised floor installation (opening size 410x215mm) DP-KP-RB4 Round cable entry with brush, 4" (100mm) DP-KP-KAR-A DP-KP-RB4 DP-KP-HCE DP-KP-KAR 2 www.conteg.com DP-KP-KAR4 DP-KP-KAR4-d ...to complete your network :: cable protection in openings Edging strips and brush panels help to protect cables on entry and can limit dust penetration into the rack. In all cases they are installed into the cable inlet openings.