Transcript
EXCEPTIONAL ENGINEERING | ROCK SOLID | EXTENSIVE TESTING FORD RANGER (1993-2011) FORD EXPLORER (1995-2001) Placement Seat Configurations Drilling Required Pole Weight Passenger side on the floor, on top of seat bracket Bucket/Bench No - attaches seat studs: Ford Ranger(1993-2011) Ford Explorer (1995-2001) Ordered separately 7.0 lbs Height Width Depth 6.25” 12.0” Features: • • • • • Heavy gauge steel construction for long-term durability Black powdercoat finish for maximum corrosion resistance Angled Step moves pole away from passenger leg space Won’t interfere with levers or factory-installed console or 4WD lever on floor One Offset Universal Mounting Step (Item No. DS-STEP) is already included with this vehicle base. However, additional Offset Universal Mounting Steps can be ordered to stack on top of each other if needed. Item No. DS-118 W H D 3001 Borham Ave. | Stevens Point, WI 54481, USA Phone: 715.344-3482 | Toll-free: 800.487-9220 | Fax: 715.344-5209 Email: [email protected] | Website: www.gamberjohnson.com This document, including images, may not be reproduced partly or fully without the expressed written consent of Gamber-Johnson’s Marketing Department. © Copyright 2012 Gamber-Johnson LLC 7.5”
