Download Da-Lite Series 300 Lace and Grommet Frame

Transcript
SERIES 300 LACE AND
GROMMET FRAME
SPECIFICATION DATA
DA-LITE SCREEN COMPANY, INC.
3100 North Detroit Street
Post Office Box 137
Warsaw, Indiana 46581-0137
Phone: 574-267-8101
800-622-3737
Fax: 574-267-7804
Toll Free Fax: 877-325-4832
www.da-lite.com
e-mail: [email protected]
SUGGESTED SPECIFICATIONS:
projection screen(s),
(H) x
(W), constructed of
3" diameter aluminum tubing with radius frame corners. Frame sections to be slip fit at corners. Lacing cord to be woven onto frame
sections with preinstalled S-hooks for viewing surface attachment. Frame to be powder coated black with optional 7" wide masking
cover to conceal lace cord and hooks. Optional masking cover includes Pro-Trim® to enhance appearance and absorb light surrounding
the viewing area. Frame can be suspended from ceiling by means of included eyebolts installed on top frame section. Wall mount
brackets and eye bolts included for wall or ceiling installation.
The Series 300 lace and grommet frame is designed for use with flexible lace and grommet screen surfaces (sold separately).
All Da-Mat® Foldable Black Backed, High Contrast Da-Mat®, Cinema Vision, High Contrast Cinema Vision, Pearlescent, Da-Tex®, High
Contrast Da-Tex®, Ultra Wide Angle (Rear), and Dual Vision surfaces are seamless up to 16' high.
High Contrast Cinema Perf, Audio Vision and High Contrast Audio Vision surfaces are available in sizes up to 8' high.
Screen frames with an outside dimension greater than 20'8" will have two-piece top and bottom or side frame sections.
Maximum frame outside dimension (height or width) is 90' for front projection and 40' for rear projection.
Maximum screen viewing area (height or width) is 88'10" for front projection and 38'10" for rear projection.
Specifications subject to change without notice.
Overall frame dimensions ±1/4".
WHEN ORDERING, MARK APPROPRIATE SELECTIONS:
Designed for use with the following lace and grommet screen surfaces:
❏ Da-Mat® Foldable Black Backed
❏ High Contrast Da-Mat®
❏ Cinema Vision
❏ High Contrast Cinema Vision
❏ High Contrast Cinema Perf
❏ Pearlescent
❏ Da-Tex® (Rear)
❏ High Contrast Da-Tex® (Rear)
❏ Ultra Wide Angle (Rear)
❏ Dual Vision
❏ Audio Vision
❏ High Contrast Audio Vision
Options:
❏ Pro-Trim® Masking Cover
Pro-Trim® is a fabric covering that aesthetically enhances the appearance of the installation. The Pro-Trim® masking cover conceals
screen binding and lacing cord.
❏ Series 300 Lace and Grommet Frame with Single Axis curve. Pro-Trim® Masking Cover not available on single Axis curve.
Project:
Architect:
Phone:
Contractor:
Phone:
Supervisor:
Phone:
Date:
Revised:
SERIES 300 LACE AND GROMMET FRAME
31/4"
VIEWING WIDTH +14"
7"
7"
VIEWING
HEIGHT +14"
FRAME SHOWN ASSEMBLED WITH PRO-TRIM® MASKING COVER
VIEWING
WIDTH +14"*
3"
VIEWING
HEIGHT +14"*
*WHEN USING STANDARD 2" BINDING ON SCREEN SURFACE.
FRAME SHOWN ASSEMBLED WITH VIEWING SURFACE (SOLD SEPARATELY)
Rev. 2/08