Transcript
Vehicle Solution Package: Chevrolet Impala Police Package Only (2006-2013) Console System Rugged Docking Stations and Vehicle Mounts Solution Components: 1. Leg Kit (Item No. 7160-0121) Drilling is required for the rear leg only, the front legs attach to the passenger side seat studs. 2. 23” Top Plate 5 (Item No. 7160-0086) Top plate allows console box to be offset towards the passenger for added space . 3. Low Profile Ergonomic Console Box 4 (Item No. 7160-0237) The Low Profile Ergonomic Console Box can be mounted towards the dash, creating added space for other mounting equipment or easier passenger side exit. Ergonomic design makes it easier to access radios and siren controls. Console box comes with standard faceplates and filler panels (full faceplates must be ordered separately). 4. Computer Mounting Bracket (Item No. MCS-COMBRKT) Computer Mounting Bracket allows the computer to be mounted directly to the console box, keeping the computer low in the vehicle and out of the air bag zone. 5. Motion Attachment 2 3 1 (Item No. 7160-0285) Motion Attachment has tilt capabilities up to 90° forward/30° backward and can swivel up to 60° right/60° left on two different pivot points and can slide up to 5” forward/backward. Accessories: Item No. 7170-0143 Must order package as is. There are no substitutions. 3001 Borham Ave, Stevens Point, WI 54481 Toll Free: 800-456-6868 Fax: 800-934-3577 Email: [email protected] Website: www.gamberjohnson.com Gamber-Johnson offers a variety of accessories for the console box including full faceplates, LED lights, mic clips, cigarette adapter kits and power distribution blocks. (These are not included in the Packaged solutions, must order separately) This document, including images, may not be reproduced partly or fully without the expressed written consent of Gamber-Johnson’s Marketing Department. © Copyright 2013 Gamber-Johnson, LLC
