Download Gamber-Johnson 7170-0142 mounting kit

Transcript
Vehicle Solution Package:
Chevrolet Silverado (2007-2013)
Chevrolet Suburban (2007-2013)
Chevrolet Tahoe (2007-2013)
Chevrolet 1500/2500/3500 (2007-2009)
GMC Sierra (2007-2013)
GMC Yukon/Yukon XL (2007-2013)
Pedestal System
Rugged Docking Stations and Vehicle Mounts
Solution Components:
4
1. Vehicle Base
(Item No. DS-144)
Vehicle Base is a no-drill solution
and attaches to the passenger
side seat studs. Designed using
heavy gauge steel for long-term
durability.
2. Lower Tube
(Item No. DS-LOWER-9)
The Lower Tube provides vertical
clearance over the center console
or the seat.
3
3. Upper Pole
2
5
(Item No. 7160-0178)
Center Upper Pole allows for closer
mounting to the dash and less
stress on the vehicle mounting
equipment as weight is centered
on the pole. Wrench is needed for
loosening, tightening or height
adjustment.
4. Locking Swing Arm
1
Item No. 7170-0142
Must order package as is. There are no substitutions.
3001 Borham Ave, Stevens Point, WI 54481
Toll Free: 800-456-6868 Fax: 800-934-3577
Email: [email protected]
Website: www.gamberjohnson.com
(Item No. 7160-0341)
Locking Swing Arm can rotate
around 360° with locking points
every 15°. Motion Attachment
has tilt capabilities up to 90°
forward/30° back and can be
swiveled up to 360°.
5. Support Brace
(Item No. 7160-0230)
Support Brace provides additional
mount system support in rugged
driving conditions and increases
mounting system rigidity.
This document, including images, may not be reproduced partly or
fully without the expressed written consent of Gamber-Johnson’s
Marketing Department. © Copyright 2013 Gamber-Johnson, LLC