Transcript
SnapX 2x Switcher For Mac • Connect 2 Macs to a LED Cinema Display • Easy, secure switching for Macs • USB pass-through for iSight camera, audio and USB ports Two Macs, One Display The Kanex SnapX is a compact two-port switcher designed for Apple LED Cinema Displays 27 and 24 inch. Simply connect the two built-in mini DisplayPort cables with USB from the SnapX to your Mac computers, plug the display cable to the unit and you are set. Effortless Mac Switching With the SnapX, switching from your MacBook Air to your Mac mini is a “snap” away. Toggle between the two sources by pressing the button on top and watch the LED light switch. No external power required for the SnapX. Cable Clutter Free SnapX hides all wires neatly behind the display providing a clutter-free environment on your desk. It also reduces stress on the connectors and prevents intermittent signal loss due to loose cable connections. Clip-on Design For optimum flexibility and ergonomics, SnapX easily clips on by just sliding underneath your Apple LED Cinema Display stand. Functionally designed for any desktop or office application that requires secured switching and extending without compromise. Extended Reach SnapX provides a convenient length of 5ft. (1.5m) dual cables built-in to the unit, thus providing an extension without unnecessary cables and adapters. Technical Specifications: • Input: 2x Mini DisplayPort Male (Front Source) 2 x USB A Male (From USB Host, or to USB Device) • Output:1x Mini DisplayPort Female (to display) 1x USB A Female (to USB device or from USB Host) • Power: No power supply needed. Powered through USB or MDP (source) • Voltage: 3~5V, Current: <180mA • Power Consumption: 0.9W • Size (L-W-H): 3.4in. X 2.75in. X 0.68in. • Weight: 3.4in. X 2.75in. X 0.68in. • Operating Temperature: 0° to +70° • Operating Humidity: 10% to 85% RH (no condensation) • Storage Temperature: v-10° to +80° • Storage Humidity: 5% to 90% RH (no condensation) • Warranty: 1-Year Parts & Labor UPC: 814556011410 MPN: SNAPX kanexlive.com/snapx
