Transcript
EXCEPTIONAL ENGINEERING | ROCK SOLID | EXTENSIVE TESTING RAM 1500-5500 (2002-2013) STERLING BULLET 4500-5500 (2008) Placement Passenger side on the floor, under the seat Seat Configurations Bucket/Bench Drilling Required Recommended Pole Solution Weight Height Width Depth No - attaches seat studs: Ram 1500-5500 (2002-2013) Sterling Bullet 4500-5500 (2008) Without factory console: Lower Tube: DS-LOWER-7 Upper Pole: QADJ-UPPER-L Offset Mounting Step: DS-STEP Support Brace: 7160-0230 Motion Attachment: 7160-0419 (CLEVIS) Tubes/Poles and Motion Attachments ordered separately 4.1 lbs 3.58” 18.25” Features: • • • • Heavy gauge steel construction for long-term durability Black powdercoat finish for maximum corrosion resistance Will not interfere with levers or factory installed consoles An Offset Universal Mounting Step (Item No. DS-STEP) maybe ordered separately to move the pole away from passenger leg space Note - 1.) If your Dodge Ram has a factory installed console and/or manual shift on the floor, the recommended pole solution is DS-LOWER-13, QADJ-UPPER-M, 7160-0230 and 7160-0284 (QUAD MOTION TS3). 2.) If your Sterling Bullet has a factory installed console and/or manual shift on the floor, the recommended pole solution is DS-LOWER-9, QADJ-UPPER-L,7160-0230 and 7160-0419 (CLEVIS). Item No. 7160-0182 D W H 3001 Borham Ave. | Stevens Point, WI 54481, USA Phone: 715.344-3482 | Toll-free: 800.487-9220 | Fax: 715.344-5209 Email: [email protected] | Website: www.gamberjohnson.com This document, including images, may not be reproduced partly or fully without the expressed written consent of Gamber-Johnson’s Marketing Department. © Copyright 2012 Gamber-Johnson LLC 5.08”
