Download Addonics AK25IDE35B drive bay panel
Transcript
2.5" to 3.5" IDE HDD Converter kit Model: AK25IDE35B, AK25IDE35W, AAMKHD25B, AAMKHD25W, AAMKSFHD25B, AA25IDE35 INTRODUCTION This installation kit enables any 2.5" hard drive or SDD (Solid State Drive) to be used like a standard 3.5" hard drive in a desktop system. Comes in choice of brackets for standard 1" height or the slim floppy height, the sturdy mounting metal bracket allows any hard drive or SSD to fit perfectly into any standard or slim floppy 3.5" drive bay. For 2.5" IDE drives or SSD, the IDE connector kit mounts easily onto the back of the drive, enabling it to connect to PC power supply and the standard IDE cable commonly found on desktop, server and most industrial PCs. Comparison of standard height and slim floppy bracket www.addonics.com Addonics Technologies Inc. 1918 Junction Avenue, San Jose, CA 95131 Phone: 408.573.8580 | Fax: 408.573.8588 2.5" to 3.5" IDE HDD Converter kit Model: AK25IDE35B, AK25IDE35W, AAMKHD25B, AAMKHD25W, AAMKSFHD25B, AA25IDE35 FEATURES 3.5" bay mounting bracket • Choice of bracket to fit 3.5" standard height ( 1 inch or 24.5 mm.) or half height ( .5 inch or 12.3 mm) drive bay • Compatible with any 2.5" IDE or SATA hard drive or SSD • Bracket comes with hard drive mounting screws • Choice of ivory or black color mounting bracket for standard height bracket 2.5" IDE to 3.5" IDE connector converter (model: AD25IDE35) Connect 2.5" IDE hard drive or SSD to standard 40-pin IDE commonly found on most Desktop system SPECIFICATIONS Supported Drive Type: Power source: Bracket Material Bracket Dimensions: Weight: Warranty: www.addonics.com 2.5" Hard drive or SSD PC power supply Metal Standard height bay- AAMKHD25B or AAMKHD25W: 4 in. (W) x 3.81" (D) x .97" (H) Slim floppy bay - AAMKSFHD25B 4 in. (W) x 3.81" (D) x .49" (H) ~ 10 oz (bracket only) 90 days Addonics Technologies Inc. 1918 Junction Avenue, San Jose, CA 95131 Phone: 408.573.8580 | Fax: 408.573.8588