Download Eaton S-Series 42U

Eaton.com/S-Series
Eaton S-Series Rack
Unmatched reliability and service for your critical IT electronics and servers
Designed for small and
medium-sized businesses,
the Eaton S-Series
Rack with rack hygiene
supports and optimizes IT
equipment. These standard
configured racks are
scalable and integrate an
array of options including
cable management, power
distribution and backup
power to provide a full
network solution.
Features
•
•
•
•
•
•
•
•
•
•
Enhanced frame ensures zero leakage around
the front perimeter and also features oval
grommets in front frame verticals for cable
pass-thru between racks.
High flow single front door with 75 percent open
perforation pattern
High flow split rear door with 75 percent open
perforation pattern
Top panel with two six inch wide brushed openings
for cable egress
Standard models available with side or divider panels
19 inch EIA-310 vertical mounting rails (quantity four)
with U-markings
Vertical blanking panels (quantity two) with cable passthru for 30 inch wide models only
Integrated cable trough for overhead cable distribution
Grounding pre-installed
Color: Black
To interact with the Eaton S-Series
rack, please visit Eaton.com/S-Series
EATON S-SERIES RACKS
Catalog Number
Configuration
Height U
Width, in
Depth, in
Approx. Unit
Weight, lb
Casters
ETN-ENC422442SB With side panels (2)
42
24
42
367
Yes
ETN-ENC422442S
With divider panel (1)
42
24
42
309
Yes
ETN-ENC423042S
With divider panel (1)
42
30
42
351
Yes
ETN-ENC422448S
With divider panel (1)
42
24
48
321
Yes
ETN-ENC423048S
With divider panel (1)
42
30
48
364
Yes
ETN-ENC422442SE
Without panels and doors
42
24
42
171
No
ETN-ENC482442S With divider panel (1)
48
24
42
336
Yes
ETN-ENC483042S With divider panel (1)
48
30
42
380
Yes
ETN-ENC482448S
With divider panel (1)
48
24
48
350
Yes
ETN-ENC483048S
With divider panel (1)
48
30
48
394
Yes
Standard feature
Optional accessories*
Cable management
Solid side panel
Accomodates large cable
quantities and provides
unmatched rack-to-rack,
raised floor, and overhead
cable access.
A solid side panel kit (qty.
1) is available to further
enclose your rack where
end-of-row or single-rack
aesthetics are necessary.
SOLID SIDE PANELS
Optional accessories*
Cable rings
Allows for vertical cable
management with flexible
mounting to multiple points.
Catalog Number
Height
Width
ETN-ACC4842SP
48U
42"
ETN-ACC4848SP
48U
48"
ETN-ACC4242SP
42U
42"
ETN-ACC4248SP
42U
48"
Blanking panels
Lacing bars
Flexible management bar
for attaching/mounting
cables and power strips.
Tool-less plastic blanking
panels prevent air
recirculation.
Floor grommet
Allows maximum pressure
to be maintained in the
sub-floor plenum when
cables are installed.
Lifetime warranty
Eaton Corporation
Electrical Sector
8609 Six Forks Road
Raleigh, NC 27615
800-356-5794
Eaton.com/powerquality
© 2012 Eaton Corporation
All Rights Reserved
Publication No. ITRACK03FXA/0512
Eaton S-Series racks are backed
by a limited lifetime warranty.
*For a complete listing of available accessories, please
visit Eaton.com/S-Series and click on the options tab.