Transcript
DPS3 Power Supply/Charger Rev. DSDPS3 - A23F Overview • This unit converts a low voltage AC input into 6VDC, 12VDC or 24VDC output. These general purpose power supplies have a wide range of applications for access control, security and CCTV system accessories that require additional power. Specifications • • • • • • 6VDC, 12VDC or 24VDC selectable outputs. 2.5 amp supply current. Filtered and electronically regulated output. Short circuit and thermal overload protection. Battery short circuit protection (circuit breaker). Built-in charger for sealed lead acid or gel type batteries. • Maximum charge current .3 amp. • Automatic switch over to stand-by battery when AC fails (zero voltage drop). • AC input and DC output LED indicators. • Extremely compact design. • Includes Snap Trac (Altronix model # ST3) and mounting clips for DIN Rail mounting capability. ST3 Mechanical Drawing .875 .125 .625 .3125 3.4375 3.25 2.6875 2.75 Board Dimensions (approximate): 3.5”H x 2.75 ”W x 1.75 ”H Ø0.156" 0.16" 0.35" 2.75" 2.25" 3.0" 3.5" Altronix Corp. - 140 58th Street, Brooklyn, NY 11220 • 718-567-8181 • 888-258-7669 • altronix.com
