Transcript
SMP10PMC24X Supervised Power Supply/Charger Rev. DSSMP10PMC24X - A13F Overview • This unit will convert a 115VAC / 60Hz input, into a regulated 24VDC output at up to 10 amp continuous supply current (see specifications). Specifications • • • • • • 24VDC output. 10 amp supply current. Input 115VAC @ 2.7 amp. Filtered and electronically regulated outputs. Short circuit and thermal overload protection. Built-in charger for sealed lead acid or gel type batteries. • Maximum charge current .7 amp. • Automatic switch over to stand-by battery when AC fails (zero voltage drop). • • • • • • • AC fail supervision (form "C" contacts). Low battery supervision (form "C" contacts). Battery presence supervision (form "C" contacts). Power on-off switch. AC input and DC output LED indicators. Power supply, enclosure, cam lock & battery leads. Enclosure: - Combination knockouts are 1/2” and 3/4” - Accommodates up to two (2) 12VDC/12AH batteries. Enclosure Dimensions 15.5”H x 12 ”W x 4.5”D 12" 2.25" 4.56" 3.68" 1.22" 4.5" .875" 1.22" 1.22" 1.3" 9.97" 1" 1" 2" 6.625" 13.25" 13.53" 3.5" 2.2" 1.25" 1" 15.5" 1.22" 2.25" 3.68" 4.56" Altronix Corp. - 140 58th Street, Brooklyn, NY 11220 • 718-567-8181 • 888-258-7669 • altronix.com