Transcript
SMP10PM - Supervised Power Supply/Charger Rev. DSSMP10PM - 02092012 Overview This Altronix supervised power supply/charger converts a low voltage AC input into a 12VDC or 24VDC output. This unit has a wide range of applications for access control, security and CCTV system accessories that require additional power. SMP10PM Specifications Supervision (cont’d): Input: • Input 28VAC. • Battery presence and low battery supervision (form “C” contacts). Output: • 12VDC or 24VDC selectable output. • 10 amp supply current. • Filtered and electronically regulated outputs. • Short circuit and thermal overload protection. Battery Backup: • Built-in charger for sealed lead acid or gel type batteries. • Maximum charge current 0.7 amp. • Zero voltage drop when switching over to battery backup. Supervision: Visual Indicators: • AC input and DC output LED indicators. Electrical: • Operating temperature: 0º C to 49º C ambient. • BTU/Hr.: - 12VDC: 27 BTU/Hr. - 24VDC: 55 BTU/Hr. • System AC input VA requirement: 506VA. Mechanical: • Product weight (approx.): 2.45 lbs. (1.11 kg.). • Shipping weight (approx.): 2.75 lbs. (1.25 kg.). • AC fail supervision (form “C” contacts). Board Dimensions (L x W x H) (approximate): 4.266” (108.36mm) x 7.045” (178.95mm) x 2.127” (54.05mm) 0.248” (6.31mm) 0.183” (4.67mm) Ø0.156” (3.96mm) 6.725” (170.83mm) 3.71” (94.26mm) 4.266” (108.36mm) 7.045” (178.95mm) Altronix Corp. - 140 58th Street, Brooklyn, NY 11220 • 718-567-8181 • 888-258-7669 • altronix.com