Transcript
AL400ULXB Off-line Switching Power Supply/Charger Rev. DSAL400ULXB_01172012 Overview AL400ULXB is a UL Recognized power supply/charger which converts a 115VAC, 60Hz input into a single 12VDC or 24VDC Class 2 Rated power limited output. AL400ULXB Specifications Battery Backup (cont’d): Input: • Input 115VAC, 60Hz, 1.45 amp. • Input fuse rated @ 3.5 amp/250V. • Maximum charge current 0.7 amp. Supervision: Output: • 12VDC or 24VDC selectable output. • 12VDC @ 4 amp or 24VDC @ 3 amp supply current. • Class 2 Rated power limited output. • Filtered and electronically regulated output. • Short circuit and thermal overload protection. Battery Backup: • AC fail supervision (form “C” contacts). • Low battery supervision (form “C” contacts). • Battery presence supervision (form “C” contacts). Visual Indicators: • AC input and DC output LED indicators. Electrical: • Operating temperature: 0º C to 49º C ambient. • 18-27 BTU/Hr. • System AC input VA requirement: 166.75VA. • Built-in charger for sealed lead acid or gel type batteries. • Automatic switch over to stand-by battery when AC fails. Mechanical: • Product weight (approx.): 1.4 lbs. (0.64 kg.). • Shipping weight (approx.): 1.6 lbs. (0.73 kg.). Agency Approvals UL Recognized component for Access Control System Units (UL 294), Standard for Power Supplies for Use with Burglar-Alarm Systems (UL 603), Hospital Signaling and Nurse Call Equipment (UL 1069), Standard for Safety for Fire Protective Signaling Systems (UL 1481). Board Dimensions (L x W x H) (approximate): 4.5” (114.3mm) x 7.5” (190.5mm) x 2.7” (51.05mm) 0.36” (9.14mm) 0.28” (7.11mm) Ø0.156” (3.96mm) 6.7” (170.18mm) AL400ULXB 3.7” (93.98mm) 4.5” (114.3mm) 7.5” (190.5mm) Altronix Corp. - 140 58th Street, Brooklyn, NY 11220 • 718-567-8181 • 888-258-7669 • altronix.com