Transcript
JBL MS-WBC ® Wireless Bass Control Designed for use with JBL MS Series amplifiers, the MS-WBC wireless bass control lets you precisely raise or lower the bass output of your car audio system – without altering the character of the sound. Conventional bass controls work by changing the system’s crossover frequency, which affects overall frequency response (see Figure 1). But the MS-WBC lets you dial bass output up or down by up to 10dB without changing frequency response (see Figure 2). An RF remote that installs in minutes with just a screwdriver, the MS-WBC works with all the amps in your system, letting you set the perfect amount of bass for any recording or source. ® Highlights Key Specifications >> Boosts/cuts bass without changing the character of the sound >> Control type: Proprietary slope-adjusting shelf >> Adjustment range: ±10dB boost or cut >> Boost/cut frequency: 60Hz low-pass shelf (20Hz – 60Hz) >> Compatible amplifiers: JBL MS-A1004, JBL MS-A5001 >> Battery type: CR2025 (included) >> Works with multiple MS amplifiers >> Simple wireless installation Key Features >> Long battery life Crossover Frequency Changes with Bass Boost Crossover Frequency Changes with Bass Boost >> May be hardwired to car battery Figure 1 Harman Consumer, Inc. 8500 Balboa Boulevard, Northridge, CA 91329 USA Figure 2 www.jbl.com © 2010 Harman International Industries, Incorporated. All rights reserved. JBL is a trademark of Harman International Industries, Incorporated, registered in the United States and/or other countries. Features, specifications and appearance are subject to change without notice.