Transcript
SD-FS-T Technical Specification Spacedec Spacedec Freestanding Triple General Features Display Weight Compatibility: Each Mounting Head supports a maximum weight of 8kg (17 1/2 lbs) Display Compatibility: This product supports up to 3 Flat Panel Displays with a physical dimensions of up to 635mm (25”) wide and 450mm (71.72”) high and VESA mounting hole configurations of 75mm x 75mm or 100mm x 100mm. Cable Management: Cable Slot and Cable Clips (included in package) Colour: Colour is: Charcoal Grey 3 1 Warranty: 10 years limited 4 Mounting Options: A. Freestanding B. Freestanding with optional bolt down C. Bolt Through 1 Vertical height adjustment 2 Horizontal adjustment 3 360°Portrait/Landscape adjustment 4 ±20° Pan/Tilt adjustment 2 Dimension 1418mm (55.81”) Note: This product supports displays with a total maximum height (from edge to edge) of up to 800mm (31.5”). 460mm (18.11”) 51mm (2”) 483mm (19”) 307mm (12.09”) 318mm (12.51”) Note: This product supports displays with a total maximum width (from edge to edge) of up to 635mm (25”). 170mm (6.68”) 340mm (13.38”) 34mm (1.34”) MOUNTING OPTIONS: VESA MOUNTING OPTIONS Bolt Through Freestanding (with optional bolt down) 100mm 75mm 63mm (2.48”) Desk Max. Thickness 75mm 100mm 37mm (1.46”) Desk Max. Thickness No portion of this document or any artwork contained herein should be reproduced in anyway without the express written consent Atdec Pty Ltd. Due to continuing product development, the manufacturer reserves the right to alter specifications without notice. Published 04.06.12 C