Transcript
Luminance Meter MAVO-MONITOR USB (cd/m²) for Contact Measurements Features • Precision measurement of the luminance • Classified according to DIN 5032-7 Class B and CIE no. 69 • Silicon photo diode, colour corrected, i.e. its spectral responsitivity is matched to the spectral phototic vision of the human eye V (λ). • Easy to operate • Fully functional for all professional requirements • 3 ½ digit display • Data storage of max. 100 values • Automatic battery test • USB 1.1 Interface • CD Rom with software for processing the values measured and regulating the meter • Ever-ready case and USB cable included Applications Technical Data Digital precision instrument for measuring luminance with the measuring sensor placed directly on the luminous or backlighted surfaces, for instance monitors (CRT/LCD), TV screens, light boxes, light panels, traffic signs and ground glass. An easy to handle, user-friendly measuring instrument for professional applications in industry and service, for special checks and certified testings according to the existing safety regulations, above all at work stations, in medical and office systems Measuring Ranges Measuring Rate 0,01 cd/m² to 19 990 cd/m² subdivided in 4 measuring ranges MR I 0.01 cd/m² MR II 0.1 cd/m² MR III 1 cd/m² MR IV 10 cd/m² 2 measurements/sec. Display Digital, 3 ½ digits LCD Accuracy Classified according DIN 5032-7, Class B Resolution Functions and Technical Data Light Sensor Silicon photo diode with V (λ)-filter According to DIN 5032-7 Class B Measuring Principle Contact measurement with the sensor placed directly on the surface to be measured Measuring Sensor Meas. aperture Measuring surface 18,5 mm Durchmesser 6,5 x 6,5 mm Function „Hold“ The current measurement value can be held in the display by pressing the data hold key. Function „Mem“ Storage in memory of upto 100 values. Read-out in the display or via USB port Power Supply Battery Battery Life 1,5 V alkaline-manganese cell (IEC LR 6) size AA approx. 45 hours continuous operation When the meter is connected to a PC, power will be supplied by the PC via the USB cable Electromagnetic Compatibility EMC The MAVO-MONITOR meets the Specifications 89/336/EWG dt. 01.01.1996 Ordering Numbers Description MAVO-MONITOR USB with measuring sensor MAVO-MONITOR USB without measuring sensor (only when used with MAVO-SPOT) Calibration certificate for MAVO-Monitor USB Dimensions Meas. Instrument 65 x 120 x 19 mm Meas. sensor 31 x 105 x 95 mm Connecting cable length 1,5 m Weight Approx. 265 g without battery Standard Equipment Measuring instrument with sensor, ever-ready case, battery and instruction manual, USB cable, CD ROM with software for processing the values measured and regulating the meter Optional Accessories MAVO-SPOT Attachment for measuring the luminance from the distance, measuring angle 1° Calibration Certificate – optional at additional price Calibration reference: Scientific Standard Lamp, type Wi 41 G of the PTB, (Physikalisch Technische Bundesanstalt Braunschweig – National Standards Institute). This Calibration Certificate is necessary for all applications, where measurements, controls and inspections are required by the relevant laws and regulations. Order No. M504G Price M506G H997B _____________________________________________________________________________________________________________________ Page 4 GOSSEN Foto- und Lichtmesstechnik GmbH