Transcript
Model information about cooker hoods Miele Model name/ model ID number Configuration Vented/Recirculation Convertible for recirculation operation Rear wall fixing Ceiling fitting Housing unit fitting top/bottom/side Dimensions Product dimensions Unit height including chimney piece Niche dimensions for assembly Depth Minimum Minimum distance above gas hob Features 1 Vent connection top/rear/side ) Vent connection diameter Non-return flap in unit Fan adjustable infinitely/in stages (no.) 2 Intensive setting ) 3 Flow rate ) Vented from – To Recirculation from – To Intensive setting vented/recirculation 4 Net weight ) Electrical specifications Voltage Wattage Fuse Connection cable length Earthed plug/Fixed connection Interference suppressed Mains interference free Name and address of supplier Note: • Yes, available 1 DA 5620 D ● /– – – / / / / ● –/–/– Height Width Depth Vented Recirculation Height Width Depth cm cm cm cm cm cm cm cm cm cm cm 90,0 119,8 69,8 55,0 ● mm /–/– 150 ●/ –/3 ● 3 m /h 3 m /h 3 m /h kg V W A cm 200 - 480 700 / 43,0 230 280 10 /● ● ● Miele & Cie. KG, Postfach, 33325 Gütersloh ) Precise dimension ) Short-term high ventilation rate in conjunction with higher noise level 3 ) Depending on external fan 4 ) When fitting under a wall unit or on the wall/ceiling, ensure that the wall unit and the wall/ceiling can support the weight of the cooker hood (including decor front if appropriate). Note: Table established 07/05. Subject to further development. 2