Transcript
Model: RPK86 Model: RPK86 M-Class & Black Max Rack Mounting Kit M-Class & Black Max Rack Mounting Kit Rear of Amplifier Rear of Amplifier Installation Installation For greater rear support when rack mounting an M-Class or Black Max amplifier, the RPK86 Rack Mounting Kit can be attached to the rear of the amplifier by following the steps below. For greater rear support when rack mounting an M-Class or Black Max amplifier, the RPK86 Rack Mounting Kit can be attached to the rear of the amplifier by following the steps below. 1. Remove and save the three cover screws from the chassis of the amplifier. 1. Remove and save the three cover screws from the chassis of the amplifier. 2. Position the rack attachment as shown. 2. Position the rack attachment as shown. 3. Replace and tighten the three cover screws to secure the rack attachments. 3. Replace and tighten the three cover screws to secure the rack attachments. Specifications subject to change without notice. © 2001 Bogen Communications, Inc. Part No. 54-2064-01R1 Printed in USA. 0105 50 Spring Street, Ramsey, NJ 07446, U.S.A. Tel. 201-934-8500, Fax: 201-934-9832, www.bogen.com Specifications subject to change without notice. © 2001 Bogen Communications, Inc. Part No. 54-2064-01R1 Printed in USA. 0105 50 Spring Street, Ramsey, New Jersey 07446 Tel. 201-934-8500, Fax: 201-934-9832, www.bogen.com