1
Download Shuttle PV01 mounting kit
Transcript
Product Specification Shuttle Accessory VESA mount accessory PV01 compatible to the XS35 series PV01 Its optional VESA75/100 wallmount allows it to be installed on to walls or just affixed on the rear side of a monitor which is particularly interesting for the industry segment, company buildings and public institutions. Feature Highlight Scope of delivery • • VESA mount 4 screws Compatibility • • Compatible with Shuttle XS35 series Supports 75 and 100mm standards Images for illustration purposes only. Page 1 | 3 August 2010 www.shuttle.com S h u t t l e C o m p u t e r H a n de l s G m b H Fritz-Stras s man n -Str. 5 25337 Elmshorn | Germany Tel. +49 (0) 4121-47 68 60 Fax +49 (0) 4121-47 69 00 [email protected] ©2009 by Shuttle Computer Handels GmbH (Germany). All Information subject to change without notice. Pictures for illustration puposes only. Article number: PV01 Product Specification XPC Accessory PV01 – Installation Guide c d Due to safety reasons, please turn off your computer completely first and unplug it from the power supply. Unscrew one screw of the stand mount and remove the vertical stand. Fasten the VESA MOUNT at rear of LCD monitor with four screws. As shown, install the XS35 in the VESA MOUNT and push it towards the direction as indicated by the red arrow. g Check that it is properly aligned, then tighten securely with one thumbscrew. Page 2 | 3 August 2010 www.shuttle.com S h u t t l e C o m p u t e r H a n de l s G m b H Fritz-Stras s man n -Str. 5 25337 Elmshorn | Germany Tel. +49 (0) 4121-47 68 60 Fax +49 (0) 4121-47 69 00 [email protected] ©2009 by Shuttle Computer Handels GmbH (Germany). All Information subject to change without notice. Pictures for illustration puposes only. f e
