Transcript
V7 CABLES V7 CAT6 SNAGLESS MOLDED PATCH CABLES Featuring more stringent specifications for reducing crosstalk and system noise, V7 CAT6 snagless molded patch cables maximize your Local Area Network (LAN) speed and are perfect for higher bandwidth applications, such as Voice over IP (VoIP) or video applications. V7 CAT6 patch cables provide clean, clear transmissions with lower return loss, resulting in reliable and practical Gigabit-Ethernet performance. The cables feature snagless molded connector boots to provide strain relief and ensure a durable and solid connection. V7 Cat6 cables are available in a wide range of colors and lengths. V7 CAT6 Snagless Molded Patch Cables: Length Black Blue Green Gray Red Yellow 1 ft / 0.3 m V7N2C601F-BLKS V7N2C601F-BLUS V7N2C601F-GRNS V7N2C601F-GRYS V7N2C601F-REDS V7N2C601F-YLWS 3 ft / 0.9 m V7N2C603F-BLKS V7N2C603F-BLUS V7N2C603F-GRNS V7N2C603F-GRYS V7N2C603F-REDS V7N2C603F-YLWS 5 ft / 1.5 m V7N2C605F-BLKS V7N2C605F-BLUS V7N2C605F-GRNS V7N2C605F-GRYS V7N2C605F-REDS V7N2C605F-YLWS 7 ft / 2.1 m V7N2C607F-BLKS V7N2C607F-BLUS V7N2C607F-GRNS V7N2C607F-GRYS V7N2C607F-REDS V7N2C607F-YLWS 10 ft / 3m V7N2C610F-BLKS V7N2C610F-BLUS V7N2C610F-GRNS V7N2C610F-GRYS V7N2C610F-REDS V7N2C610F-YLWS 14 ft / 4.2 m V7N2C614F-BLKS V7N2C614F-BLUS V7N2C614F-GRNS V7N2C614F-GRYS V7N2C614F-REDS V7N2C614F-YLWS 25 ft / 7.6 m V7N2C625F-BLKS V7N2C625F-BLUS V7N2C625F-GRNS V7N2C625F-GRYS V7N2C625F-REDS V7N2C625F-YLWS Specifications: Performance: ETL-verified to TIA/EIA-568-B.2-1 ISO/IEC 11801 and RoHS compliant Tested to 500MHZ Colors: Various Connectors: RJ45 Connectors with snagless molded boot Conductors: Cable Jacket: 4 Pair 24AWG Stranded Bare copper Country of origin: China Lifetime Warranty against material defects and workmanship Compliance: Warranty: PVC For a complete list of V7 products, Please visit our website www.ingrammicro.com/V7 or contact your Ingram Micro Sales Representative at 800-456-8000. [Type text] The data in this publication is for illustration purposes only and does not necessarily represent standards or specifications which must be met by V7. Design and specifications are subject to change without prior notice. Trademarks belong to their respective owners. No responsibility assumed and all liability for damages resulting from use of this information or for any errors or omissions, are disclaimed. Measurement standards and testing conditions, as per manufacturer definitions, are available on request. 02/28/2011 8/17/2009 www.V7-world.com