Download Da-Lite CM-FT
Transcript
P RO J E CTO R M O U N T S ABOVE CEILING PLATE • Designed to accommodate any projector mount with 11/2" NPT pipe. • Conveniently fits and attaches within 1' x 2' area of drop ceiling grid. • Will not interfere with tie wires or lighting fixtures in suspended ceiling grid. • Projector mount may be positioned in corner of ceiling grid. • Maximum load of 50 pounds. • Two electrical knockouts provided. • Kit includes 10' of safety cable, 20' of tie wire, four turn buckles, wood and concrete anchors. • Includes a white finish escutcheon ring. PLENUM COVER PACKAGE • Plenum kit for use with CPM-ACP. • Features removable lid for easy access. • Includes knockouts for 11/2" and 3/4" electrical conduit. • White powder coated finish. 166 www.da-lite.com • [email protected] P RO J E CTO R M O U N T S PROJECTOR MOUNT ACCESSORIES Vibration Isolation Ceiling Plate Unistrut™ Parallel Coupler CM-VIP is isolated from the base plate by 8 natural rubber isolators and successfully isolates up to 48 lbs. from vibration. CM-UPC 11/2" NPT female pipe coupler designed to mount to a vertical piece of Unistrut™ for height Cable Access Ceiling Plate Unistrut™ Sliding Pipe Coupler CM-CAP has a 11/2" recess in the plate allows for cable access once the plate is mounted to the ceiling structure. CM-USC Unistrut™ Channel Pipe Coupler for use with 11/2" NPT pipe. Suspended Ceiling Plate Extension Pipe CM-SCP Exclusive Unistrut™ Sliding Suspended Ceiling Plate (white or black finish available). 2' x 2' mounted to the ceiling structure. CM-MT 13/4" x 11/2" NPT Male All Thread Extension Pipe. Cathedral Ceiling Adapter Cable Access Coupling CM-CCA-Used for hanging ceiling mounts to cathedral ceiling. Use with 11/2" NPT pipe. CM-CAC 11/2" NPT Female Pipe Coupler with cutout access for cable. Ceiling Plate Pipe Coupler Ceiling mount coupling plate for use with 11/2" NPT pipe. CM-FT 2" x 11/2" NPT Female Threaded Pipe Coupler. • A304 Single • A305 Four pack 800-622-3737 • fax 877-325-4832 167 P RO J E CTO R M O U N T S PROJECTOR MOUNT ACCESSORIES Ceiling Mount Pipe Stabilizer CM-PS Stabilizer Kit for 1 /2" NPT pipe. 1 Adjustable Extension Pipes Available in size ranges from 5” to 8” up to 24” to 36” and are available in a black or white powder coated finish. Hardware Kits Escutcheon Rings • A-101 For Mounting To Solid Concrete A302 Escutcheon Ring for 11/2" Support Pipe available in black, white or chrome. • A-105 For Mounting To Wood Stud/Beam Cable Lock Kit A-565 Cable Lock for the UPM-1 and UPM-2 Universal Projector Mounts. • A-111 For Mounting To Hardware Kit for Unistrut™ A-101 Fixed Extension Pipes Five lengths of black or white 11/2" NPT pipe; 4", 6", 10", 18", 24". Adjusts distance between ceiling mount coupling plate and mount. 168 Projector Security Cage The perfect accessory for the prevention of projector theft and damage. The CPM-SC20 is 20" x 20" x 12" and the CPM-SC16 is 16" x 16" x 12". Available in a black or white powder coated finish. www.da-lite.com • [email protected]