Transcript
APart PIR-REC PRE-AMPLIFIER The PIR-REC is an IR receiver that can be used to capture different IR signals and send them to the PIR7600. It comes standard with the PIR7600. The PIR-REC can be installed by using the included adhesive tape or the 2 small screws. This makes it easy to install. Besides the IR signals to control the PIR7600, the PIR-REC is capable to capture the IR signals of other devices like DVD, CD, Tuner or others, and send them to the PIR7600. The PIR-EMIT will then prolongue the IR signal to the corresponding device. As soon as the PIR-REC is plugged into the PIR7600 the IR receiver on the front of the pre-amplifier is no longer functioning until the PIR-REC is unplugged. TECHNICAL SPECIFICATIONS Material Connector Cable length Dimensions (dia x H) Weight WWW.APART-AUDIO.COM Plastic stereo mini jack 5m 35 x 16 mm 0.088 Kg (adhesive tape and screws included) [email protected]
