Download Infocus SP-WALLARM-01 project mount

page 1 of 2
TECHNICAL DATA SHEET -
Universal Projector Wall Arm
MODEL: SP-WALLARM-01
The SP-WALLARM-01 Universal Projector Wall Arm is designed for
the short throw projector. The projector is positioned from the wall
by sliding the telescoping arm. The end result is a projection throw
with a distance ranging from 28.75" - 50". The arm is compatible
with both the Peerless SP-CEIL-UNIV and ACC560 projector mount
line. Security fasteners are included.
Features:
•
•
•
•
•
Provides a projection throw distance of 28.75” - 50”
Compatible with both the SP-CEIL-UNIV and ACC560
Rated to 35 lbs max load
Wall plate can be inverted to position the arm closer to the ceiling
Cord management within the arm
Accessories:
• WSP320 Metal Stud wall plate for 16” centers
• ACCMIS550 Security Cable for Metal Stud Installation
• ACC020 Projector Security Cable
Dimensions:
SP-CEIL-UNIV Sold Separately
Weight:
10.4 lb (4.7 kg)
Shipping weight:
15.5 lb (7kg)
Maximum Load Capacity:
35 lb (15.9 kg)
Shipping Carton dimensions:
L = 47.25 in (1200 mm)
W = 18 in (457 mm)
H = 5 in (127 mm)
AR C H I T E C TS S P E C I F I CAT I O N S
Projector Wall Mount shall be an InFocus model SP-WALLARM-01 and shall be located where indicated on the plans. Assembly and
installation shall be done according to instructions provided by the manufacturer.
Visit the InFocus Web Site at www.infocus.com
ISSUED: 09-02-08 SHEET NO: 056-9633-1
page 2 of 2
TECHNICAL DATA SHEET
MODEL: SP-WALLARM-01
INCH
ALL DIMENSIONS =
(MM)
.34in
(9mm)
1.50in
(35mm)
3.50in
(89mm)
5in
(127mm)
11in
(279mm)
5.89in
(150mm)
3.89in
(99mm)
40.11in
(1019mm)
FRONT VIEW
SIDE VIEW
MIN 28.75 in
MAX 50in
SIDE VIEW WITH PROJECTOR
SP-CEIL-UNIV Sold Separately
Visit the InFocus Web Site at www.infocus.com
ISSUED: 09-02-08 SHEET NO: 056-9633-1