Download EnGenius ECB-3610S Indoor
Transcript
Wireless Client Bridge/AP/ WDS 2.4GHz 802.11 b/g ECB-3610S 54 Mbps ECB-3610S Wireless High Power and High Gain Client Bridge/Access Point/ WDS (wireless distribution system) operates in the 2.4 GHz frequency spectrum supporting the 802.11b (2.4GHz, 11Mbps) and the newer, faster 802.11g (2.4GHz, 54Mbps) wireless standards. It's the best way to add wireless capability to your existing wired network, or to add bandwidth to your wireless installation. To protect your wireless connectivity, it can encrypt all wireless transmissions through 64/128-bit WEP data encryption and also supports WPA. The MAC address filter lets you select exactly which stations should have access to your network. With the Wireless Multi-Client Bridge/Access Point/WDS, you'll experience the best wireless connectivity available today. Features Benefits High Speed Data Rate Up to 54Mbps Capable of handling heavy data payloads such as MPEG video streaming High Output Power up to 28dBm Excellent output power spreads the operation distance IEEE 802.11b/g Compliant Fully Interoperable with IEEE 802.11b/IEEE802.11g compliant devices Point-to-point, Point-to-multipoint Wireless Connectivity Let users transfer data between two buildings or multiple buildings WPA/WPA2/ IEEE 802.1x support Powerful data security Hide SSID (AP Mode) Avoids unallowable users sharing bandwidth, increases efficiency of the network DHCP Client/ Server Simplifies network administration WDS (Wireless Distributed System) Make wireless AP and Bridge mode simultaneously as a wireless repeater MAC address filtering (AP Mode) Ensures secure network connection Power-over-Ethernet (IEEE802.3af) Flexible Access Point locations and cost savings Support Multi-SSID function (4 SSID) Allow clients to access different networks through a single access point and assign different policies and functions for each SSID by manager Layer 2 isolation (AP mode) Improved the security of each client * Theoretical wireless signal rate based on IEEE standard of 802.11a, b, g chipset used. Actual throughput may vary. Network conditions and environmental factors lower actual throughput rate. ** All specifications are subject to change without notice. 1/30/2008 Technical Specifications Data Rates 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54 Mbps Standards IEEE802.11b/g, IEEE802.3, IEEE802.3u, IEEE802.3af, IEEE802.1f, IEEE802.1x Compatibility IEEE 802.11g/ IEEE 802.11b Power Requirements Power Supply: 90 to 240 VDC ± 10% (depends on different countries) Device: 12 V/ 1A Status LEDs LAN: Link, WLAN: Link, Power: on/off Regulation Certifications FCC Part 15 B & C, CE: EN 300328, EN 301489 EN 60950 RF Information Frequency Band 802.11b/g: U.S., Europe and Japan product covering 2.4 to 2.484 GHz, programmable for different country regulations Media Access Protocol Carrier Sense Multiple Access with Collision Avoidance (CSMA/CA) Modulation Technology Orthogonal Frequency Division Multiplexing (OFDM) DBPSK @ 1Mbps DQPSK @2Mbps CCK @ 5.5 & 11Mbps BPSK @ 6 and 9 Mbps QPSK @ 12 and 18 Mbps 16-QAM @ 24 and 36 Mbps 64-QAM @ 48 and 54 Mbps Operating Channels 11 for North America 14 for Japan 13 for Europe Receive Sensitivity (Typical) 802.11g: -90 dBm @ 6Mbps, -74 dBm @ 54Mbp 802.11b: -95 dBm @ 1Mbps -90 dBm @ 11Mbps Available Transmit Power (Typical) • 2.4~2.462G(IEEE802.11g) 27dBm @6 ~ 24Mbps 25dBm@36Mbps 24 dBm@48Mbps 23dBm@54Mbps • 2.4~2.462G(IEEE802.11b) 28dBm. @1, 2, 5.5 and 11Mbps RF Connector TNC Type (Female Reverse) Storage: -20°Cto 70°C (-4°F to 158°F) Humidity (non-condensing) 5%~95% Typical Package Contents One AP/ CB Device One TNC Dipole Antenna One Power Adapter One CAT5 UTP Cable One Quick Start Guide One CD-ROM with User’s Manual Networking Topology Ad-Hoc, Infrastructure Operation Mode Point-to-Point/ Point-to-Multipoint Bridge/ AP/ Client Bridge/ WDS Interface Wireless IEEE802.11b/g One 10/100Mbps RJ-45 LAN Port Security z IEEE802.1x Authenticator / RADIUS Client (EAPMD5/TLS/TTLS) Support in AP Mode z IEEE802.1x Supplicant (EAPMD5/TLS/TTLS, PEAP) support in Client Bridge Mode z WPA /WPA2/ Pre Share KEY (PSK) with TKIP/AES z MAC address filtering (AP only) z Hide SSID in beacons z VLAN Pass-through z L2 Isolation(AP mode) IP Auto-configuration DHCP client/server Management Configuration Web-based configuration (HTTP) Telnet Configuration SNMP V1, V2c, MIBI&II Firmware Upgrade Upgrade firmware via web-browser Environmental Temperature Range Operating: 0°C to 45°C (32°F to 113°F) * Theoretical wireless signal rate based on IEEE standard of 802.11a, b, g chipset used. Actual throughput may vary. Network conditions and environmental factors lower actual throughput rate. ** All specifications are subject to change without notice. 1/30/2008