Download Cisco Internal Service Module
Transcript
Data Sheet Cisco Services Ready Engine Compact, Versatile, High-Performance Router Blade ® The Cisco Services Ready Engine (SRE) modules are router blades for the Cisco Integrated Services Routers Generation 2 that provide the capability to host Cisco, third-party, and custom applications. The modules have their own processors, storage, network interfaces, and memory that operate independently of the host router resources, helping to ensure maximum concurrent routing and application performance while reducing physical footprint, lowering power consumption, and simplifying administration. You can provision applications on the module remotely at any time. This solution can help your organization to quickly deploy new branch-office applications on-demand, reduce operating costs, and consolidate the branch office infrastructure. Cisco SRE offers the next-generation application hosting platform that combines networking, collaboration, compute and storage services, and centralized management into a cohesive system designed to simplify infrastructure, support evolving business needs, and reduce operating costs at the branch office. It integrates all elements necessary to optimize branch-office IT infrastructure for delivery of applications from the datacenter and deployment of branch-office applications on-demand, and houses them under a single chassis - the Cisco Integrated Services Router Generation 2. Figure 1 shows the Cisco SRE Internal Service Module (ISM) and the Cisco SRE Service Module (SM), and Table 1 summarizes features and benefits of the modules. Figure 1. Cisco SRE Internal Service Module and Cisco SRE Service Module Table 1. Summary of Features and Benefits of Cisco Services Ready Engine Key Features Key Benefits ● Host Cisco, third-party, and custom applications ● Small physical, energy, and carbon footprint ● Consolidate and simplify branch infrastructure into a single device ● Save on energy bills, hardware support contracts, and on-site visits ● High-performance, high-capacity hardware ● On-demand, remote application provisioning ● Improve versatility and flexibility of branch-office infrastructure ● Quickly and cost-effectively adapt branch services and applications to evolving business needs ● Centralized management and troubleshooting © 2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 1 of 8 Data Sheet Consolidation at the Branch Office Organizations today are turning to server centralization and consolidation of branch-office infrastructure in order to reduce cost and complexity of their IT systems. These initiatives, while delivering the sought-after benefits, often create a new set of challenges: ● Application performance: Business-critical applications hosted centrally must provide performance and user experience as if they were hosted locally. ● Application survivability: Applications and network services vital to business transactions at the branch office must function during a WAN outage. ● Infrastructure flexibility: Consolidated branch-office infrastructure must provide sufficient versatility and resources to accommodate on-demand deployment of new applications. ● Centralized management: Management systems must include all infrastructure components, offer multibranch-office automation capabilities, and work transparently over the WAN. Cisco SRE has been designed to help your organization address these challenges. It provides hardware, infrastructure, and management components optimized for deployment and delivery of branch office applications. Cisco SRE hosted network and collaboration services support the centralization of applications into the datacenter by optimizing WAN access and providing communication survivability. Cisco SRE hosted compute and storage services support hosting and on-demand deployment of business-critical applications that must reside in the branch office. The entire system is managed centrally with a third-party server management system and CiscoWorks LAN Management System (CiscoWorks LMS). Cisco SRE modules and software infrastructure enable remote deployment and on-demand hosting of Cisco, thirdparty, and custom applications. A service-ready deployment model decouples the Cisco SRE hardware from the application software, enabling you to provision applications on the module remotely at any time. These capabilities, ® the rich collection of branch-office services available in the Cisco IOS Software, and the extensive set of network connectivity interfaces and modules - all integrated and housed under a single chassis - make the Cisco Integrated Services Router Generation 2 an ideal all-in-one platform for optimizing branch-office IT infrastructure. The Cisco Integrated Services Router Generation 2 with Cisco SRE modules is the only device on the market today that can consolidate the functions of an entire branch office into a single box, completely eliminating the need for servers and appliances in the branch office. The Cisco SRE Advantage Designed to meet the needs of organizations of all sizes, Cisco SRE excels in five primary areas, discussed in the following sections. Host Cisco, Third-party, and Custom Applications The Cisco SRE application hosting capabilities enable consolidation of branch-office IT infrastructure into a single box. Table 2 lists the branch-office applications supported on the Cisco SRE modules. The third-party applications listed in the Table 2 are hosted on Cisco AXP. See Cisco SRE Product Bulletin for availability dates. As more vendors join the list of Cisco AXP applications, their products will be automatically supported on the Cisco SRE modules. © 2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 2 of 8 Data Sheet Table 2. Applications Supported on Cisco SRE Modules (See Cisco SRE Product Bulletin for Availability Dates) Category Applications Network services ● Cisco Wireless LAN Controller (WLC) ● Infoblox Core Network Services Benefits Improve efficiency of branch-office applications through visibility and management ● Cisco Network Analysis Module (NAM) ● NetScout nGenius Integrated Agent Application services ● Cisco Wide Area Application Services (WAAS) ● Cisco Application Extension Platform (AXP) Improve the overall performance and reliability of branchoffice solutions and enable server centralization ● Integrated Storage System (ISS) Unified communications ● Cisco Unity Express module (voicemail and interactive voice response [IVR]) ● Nice Voice Recording Increase effectiveness of communication and collaboration through application and infrastructure integration ● Sagem Interstar Fax over IP ● Singlewire Paging over IP Physical security ● Cisco Video Surveillance Improve physical security, protect property, and comply with legislative requirements Industry applications ● Tiani Spirit Medical Data Exchange Solution ● Orion Health Rhapsody Connect Take advantage of applications that provide specific solutions addressing different business needs ● Global Protocols Skipware Small Physical and Carbon Footprint The Cisco SRE comes in two convenient form factors (Table 3): the small-footprint Cisco SRE Internal Service Module, which is installed inside the router, and the high-performance Cisco SRE Service Module, which is installed in one of the external slots on the router. The two form-factor options differ in the way they are supported on the various router models, as shown in Table 4. The capability to be housed inside of the Cisco Integrated Services Router Generation 2 chassis creates a powerful single-box device for a variety of branch-office applications. This solution has the following features: ● Unlike branch servers and appliances, Cisco SRE modules do not take up any additional physical space. ● Integration into the Cisco Integrated Services Router Generation 2 eliminates the need for cables, switch ports, power cords, and network interface cards (NICs). ● The Cisco SRE modules are highly energy-efficient, consuming only a fraction of the power required by branch-office servers and appliances. ● Remote power-on/power-off capability reduces power consumption when the module is not provisioned with any application, or can be scheduled for off-hours. The compactness of the combined Cisco Integrated Services Router Generation 2 and Cisco SRE solution translates into cost savings on power, cooling, cabling, and rack space, which in turn leads to lower carbon emissions and natural resource waste. Table 3. Cisco SRE Module Types Module Specification Cisco SRE Service Module (SM) ● The Cisco SRE Service Module is supported on Cisco 2911, 2921, 2951, 3925, and 3945 Integrated Services Routers Generation 2. ● You can deploy 1 to 4 SMs per chassis, depending on the model of Cisco Integrated Services Router Generation 2. ● The Cisco SRE SM replaces the prior-generation network module (NM) and enhanced network module (NME); however, existing NM and NME modules are supported on the Cisco Integrated Services Router Generation 2 with a carrier card in the new SM slot. Cisco SRE Internal Services Module (ISM) ● The Cisco ISM is supported on Cisco 1941, 2901, 2911, 2921, 2951, 3925, and 3945 Integrated Services Routers Generation 2. ● You can deploy 1 ISM per chassis. ● The Cisco SRE ISM replaces the prior-generation advanced integration module (AIM); existing AIM modules are not supported in the new ISM slot. © 2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 3 of 8 Data Sheet Table 4. Cisco SRE Modules Support on Cisco Integrated Services Routers Model Maximum Cisco SRE Modules Cisco SRE 300 ISM Cisco 1941 1 1 Cisco SRE 700/900 SM Cisco 2901 1 1 Cisco 2911 2 1 1 Cisco 2921 2 1 1 Cisco 2951 3 1 2 Cisco 3925 3 1 2 Cisco 3945 5 1 4 High-Performance, High-Capacity Hardware The Cisco SRE modules offer compute performance and storage capacity on par with typical branch-office servers or appliances. The various Cisco SRE modules provide different processor, storage, and memory options for applications with different performance requirements. The hardware specifications are provided in Table 6 (later in this document). Following are the main features: ● x86 64 bit single- or multicore processor options ● Up to 1 terabyte of hard disk storage capacity ● RAID 1 and hot-swappable disk on Cisco SRE 900 SM ● Field-replaceable disks on Cisco SRE 700 SM and Cisco SRE 900 SM ● Hardware-assisted virtualization and embedded cryptography chip All of the Cisco SRE hardware is independent of the host router resources, helping to ensure maximum concurrent routing and application performance. The module is connected to the router through an internal Gigabit Ethernet link. High-performance hardware allows CPU and disk-hungry applications to be hosted on the Cisco SRE module. The embedded cryptography chip supports common standard cryptography algorithms and provides additional acceleration for security applications. On-Demand Application Provisioning You can easily install, replace, or uninstall applications from the Cisco SRE hosting infrastructure using familiar Cisco device and network management tools. The management tools allow you to replace one type of application with a different, even unrelated type of application on one or a group of Cisco SREs. Moreover, you can deploy the Cisco SRE in the branch office without any application when the network is being installed and quickly provision it with a supported application at a later time. Finally, the same, consistent hardware footprint can be used to host different applications in different branch offices. Figure 2 shows the various Cisco SRE provisioning options: ● Install a branch-office application on the Cisco SRE module at network deployment time. ● Install a branch-office application on the Cisco SRE at a later time. ● Replace one branch-office application with another application without any hardware changes. ● Use the same infrastructure to run various applications in different branch offices. The on-demand provisioning capabilities of the Cisco SRE modules provide the following business benefits: ● Lower total cost of ownership (TCO): Cisco SRE modules eliminate the future cost of field-deployment. You can provision new applications remotely through the CiscoWorks LAN Management System (LMS) or Cisco Configuration Professional application without any hardware or wiring modifications in the branch office. © 2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 4 of 8 Data Sheet ● Improved operational efficiency: Cisco SRE modules shorten the time to market for deploying new applications. You can address new business opportunities quickly by provisioning applications in branch offices that have been preconfigured with the Cisco SRE module. ● Infrastructure future-proofing: Cisco SRE modules provide flexibility to meet changing business requirements. The Cisco SRE modules can replace an application with a different, more relevant one. Figure 2. Using the Same Cisco SRE Infrastructure for Different Applications Centralized Management and Troubleshooting You can provision and manage applications hosted on the Cisco SRE with Cisco Configuration Professional, command-line interface (CLI), and CiscoWorks LMS. These familiar network management (Table 5) tools offer both single- and multi-device management options. In addition, the Cisco SRE modules come with an onboard hardware diagnostic tool for monitoring the health of the hardware or troubleshooting problems. Centralized management for Cisco SRE modules provides the following features: ● Automated discovery reports the type, capacity, and properties of deployed modules and applications ● Centralized monitoring reports the health and status of deployed modules ● Centralized provisioning enables remote installation, upgrade, and un-installation of applications Network management applications are instrumental in lowering operating expenses (OpEx) while improving network availability by simplifying and automating many of the day-to-day tasks associated with managing a branch-office network. Table 5. Cisco SRE Supported Network Management Applications Application Description Version CiscoWorks LMS CiscoWorks LMS is a suite of integrated applications for simplifying day-to-day management of a Cisco end-to-end network, lowering OpEx while increasing network availability. CiscoWorks LMS offers network managers an easy-to-use web-based interface for configuring, administering, monitoring, and troubleshooting the network, saving time in configuring new services and reducing the time required to quickly isolate and fix network problems. 3.2 Cisco Configuration Professional This GUI-based device-management tool for Cisco access routers simplifies configuration of routing, firewall, intrusion prevention system (IPS), VPN, unified communications, and WAN and LAN with easy-to-use wizards. 2.0 Cisco Configuration Professional is a valuable productivity-enhancing tool for network administrators and channel partners for deploying routers with increased confidence and ease. It offers a one-click router lockdown and an innovative voice and security auditing capability to check and recommend changes to router configuration. The application also monitors router status and troubleshoots WAN and VPN connectivity problems. Cisco Configuration Professional is free; you can download it at © 2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 5 of 8 Data Sheet http://www.cisco.com/go/ciscocp. Product Specifications Table 6 provides detailed specifications for all Cisco SRE module models. Table 6. Cisco SRE Module Product Specifications Feature Cisco SRE 300 ISM Cisco SRE 700 SM Cisco SRE 900 SM Product SKU ISM-SRE-300-K9 SM-SRE-700-K9 SM-SRE-900-K9 Form factor ISM SM SM ® ® ™ ® ™ CPU Genuine Intel Processor 1.06 GHz Intel Core 2 1.86 GHz Intel Core 2 Duo 1.86 GHz DRAM 512 MB 2 GB 4 GB Compact Flash memory 4-GB internal USB flashmemory module 2-GB internal USB flash-memory module 2-GB internal USB flash-memory module Hard disk None 1 x 500 GB 2 x 500 GB (1 TB in non-RAID mode) Hot-swappable HDD None None Yes Redundant Array of Independent Disks (RAID) support None None RAID 1 Internal network interfaces Gigabit Ethernet connectivity to router backplane Gigabit Ethernet connectivity to router backplane Gigabit Ethernet connectivity to router backplane External network interfaces None 1 USB connector 1 USB connector 1 RJ-45 Gigabit Ethernet connector 1 RJ-45 Gigabit Ethernet connector 1941, 2901, 2911, 2921, 2951, 3925, 3945 2911, 2921, 2951, 3925, 3945 2911, 2921, 2951, 3925, 3945 Cisco IOS Software (on Router) IOS release 15.0(1)M IOS release 15.0(1)M IOS release 15.0(1)M Embedded hardware-based cryptography acceleration No No Yes Router platforms ® Supported Applications Applications ● Cisco Unity Express (CUE) ● Cisco Application Extension Platform (AXP) ● Cisco Unity Express (CUE) ● Cisco Application Extension Platform (AXP) ● Cisco Wireless LAN Controller (WLC) ● Cisco Wide Area Application Services (WAAS) ● Cisco Video Surveillance ● Cisco Application Extension Platform (AXP) ● Cisco Wide Area Application Services (WAAS) ● Cisco Video Surveillance ● Integrated Storage System (ISS) ● Infoblox Core Network Services ● Infoblox Core Network Services ● Cisco Network Analysis Module (NAM) ● Global Protocols Skipware ● Cisco Network Analysis Module (NAM) ● Global Protocols Skipware ● Nice Voice Recording ● Sagem Interstar Fax over IP ● Tiani Spirit Medical Data Exchange Solution ● Orion Health Rhapsody Connect ● Tiani Spirit Medical Data Exchange Solution ● Orion Health Rhapsody Connect ● Nice Voice Recording ● Sagem Interstar Fax over IP ● NetScout nGenius Integrated Agent ● NetScout nGenius Integrated Agent Power Specifications Power consumption (maximum) 20W 50W 50W 0.85 x 4 x 6.1 in. 1.58 x 7.44 x 7.5 in. 1.58 x 7.44 x 7.5 in. (2.2 x 10.2 x 15.5 cm) (4 x 18.9 x 19.1 cm) (4 x 18.9 x 19.1 cm) 9.45 x 7.18 x 2.38 in. 9.5 x 7.5 x 2.5 in. 9.5 x 7.5 x 2.5 in. (24 x 18.4 x 6.05 cm) (24.1 x 19.1 x 6.4 cm) (24.1 x 19.1 x 6.4 cm) Physical Specifications Dimensions (H x W x D) Shipping dimensions (H x W x D with packaging) © 2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 6 of 8 Data Sheet Feature Cisco SRE 300 ISM Cisco SRE 700 SM Cisco SRE 900 SM Maximum weight 0.5 lb (0.206 kg) 2.5 lb (1.1 kg) 2.5 lb (1.1 kg) Environmental Specifications Operating Conditions 32 to 104°F (0 to 40°C) normal Per operating requirements of deployable 23 to 131°F (-5 to +55°C) short term platform 32 to 104°F (0 to 40°C ) normal Humidity 10 to 85% operating Per operating requirements of deployable platform 10 to 85% operating Altitude (operating) 104°F (40°C) at sea level Per operating requirements of deployable 104°F (40°C) at 6,000 ft (1,800m) platform 86°F (30°C) at 13,000 ft (4,000m) Operating temperature 23 to 131°F (-5 to +55°C) short term 27.2°C (81°F) at 15,000 ft (4,600m) Note: De-rate 34.5°F (1.4°C) per 1,000 ft above 6,00 0 ft (per 300 m above 2,600 m) Transportation/Storage Conditions Temperature -13 to 158°F (-25 to +70°C) -4 to 149°F (-20 to +65°C) -4 to 149°F (-20 to +65° C) Relative humidity 5 to 95% 5 to 95% 5 to 95% Altitude 15,000 ft (4,600 m) 15,000 ft (4,600 m) 15,000 ft (4,600 m) Regulatory Compliance Safety Per safety requirements of deployable platform ● UL 60950-1, First Edition, Standard for safety for information technology equipment (US) ● CAN/CSA-C22.2 No. 60950-1-03, Safety of information technology equipment including electrical business equipment (Canada) ● IEC 60950-1:2001, Safety of information technology equipment / Second Edition 2005) (World-Wide)- 2nd Ed. 2005 (is optional and will roll in by Dec. 1, 2010) ● EN 60950 -1:2001, Safety of information technology equipment (CENELEC; includes EU and EFTA) ● GB4943-2001, Safety of information technology equipment (PRC) ● AS/NZS 60950-1, Safety of information technology equipment including electrical business equipment (Australia) ● NOM-019, Safety of data processing equipment (Mexico) EMC AS/NZS 3548: 1995 incorporating Amendments 1 and 2; Class A (Australia) CISPR 22: 1997; Class A (International) Code of Federal Regulations, Title 47, Part 15, Sub-part B: 2000; Class A (United States FCC) CNS-13438 (Taiwan) EN55022: 1998, EN610003-2: 1995, EN61000-3-3: 1995, EN55024: 1998, EN50082-1: 1997 (European Union & Eastern Block) EN300386: 2000; Class A (European Union licensed telecommunications network equipment operators) Emission: ● 47 CFR Part 15 Class A ● CISPR22 Class A ● EN300386 Class A ● EN55022 Class A ● EN61000-3-2 ● EN61000-3-3 ● SD/EMI (India) ● KN22 (Korea) ● VCCI Class I ● AS/NZS CISPR 22 Class A Immunity: ● CISPR24 ● EN300386 ● EN50082-1 ● EN55024 ● SD/EMI (India) ● KN22 (Korea) ● EN61000-6-1 ICES-003 Issue 3, 1998 (Canada) VCCI V-3/ 00.04 (Japan) © 2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 7 of 8 Data Sheet Ordering Information For information about how to order the Cisco SRE modules, please visit the SRE Modules Ordering Guide. To place an order, visit the Cisco Ordering Home Page and refer to Tables 7 and Table 8. For additional product numbers, including the Cisco SRE bundle offerings, please check the Cisco price list or contact your local Cisco account representative. To download software, please visit the Cisco Software Center. Table 7. Cisco SRE Ordering Information Product Number Product Description ISM-SRE-300-K9 512MB DRAM, 4GB flash storage SM-SRE-700-K9 2GB DRAM, 512MB flash storage, 500GB hard disk, field replaceable hard disk SM-SRE-900-K9 4GB DRAM, 2GB flash storage, 2 x 500GB hard disk (1 TB storage), embedded cryptography chip, RAID 1 support, hot swappable hard disk SM-DSK-SATA-500GB= Spare 500GB hard disk for SM-SRE-900-K9 Table 8. Cisco SRE and Cisco ISR G2 Bundles Ordering SKU Description C1941-SEC-SRE/K9 Cisco 1941,, SRE 300, and SEC license PAK bundle C2901-VSEC-SRE/K9 Cisco 2901, SRE 300, PVDM3-16, UC and SEC License PAK bundle C2911-VSEC-SRE/K9 Cisco 2911, SRE 300, PVDM3-16, UC and SEC License PAK bundle C2921-VSEC-SRE/K9 Cisco 2921, SRE 700, PVDM3-32, UC and SEC License PAK bundle C2951-VSEC-SRE/K9 Cisco 2951, SRE 700, PVDM3-32, UC and SEC License PAK bundle C3925-VSEC-SRE/K9 Cisco 3925, SRE 700, PVDM3-64, UC and SEC License PAK bundle C3945-VSEC-SRE/K9 Cisco 3945, SRE 700, PVDM3-64, UC and SEC License PAK bundle C2911-WAAS-SEC/K9 Cisco 2911, SRE 700, Sec PAK, WAAS Enterprise License for Small branch bundle C2921-WAAS-SEC/K9 Cisco 2921, SRE 700, Sec PAK, WAAS Enterprise License for Medium branch bundle C2951-WAAS-SEC/K9 Cisco 2951, SRE 900, Sec PAK, WAAS Enterprise License for Large branch bundle C3925-WAAS-SEC/K9 Cisco 3925, SRE 900, Sec PAK, WAAS Enterprise License for Large branch bundle C3945-WAAS-SEC/K9 Cisco 3945, SRE 900, Sec PAK, WAAS Enterprise License for Large branch bundle Warranty Information Warranty information is available on Cisco.com at the Product Warranties page. Service and Support Information Cisco SRE hardware service and support is covered by the SMARTnet contract for the router in which the module will reside. Cisco SRE-supported applications have associated Cisco Software Application Support plus Upgrades (SASU) options, which you must purchase separately; they are not included in the router or Cisco SRE module Cisco SMARTnet contract. For More Information For more information about the Cisco SRE modules, please visit http://www.cisco.com/go/SRE or contact your local Cisco account representative. © 2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 8 of 8 Data Sheet Printed in USA © 2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. C78-553913-03 10/10 Page 9 of 8