Transcript
® N-Cage Universal Projector Security Clamps Retro-fit to ceiling drop pole system Universal N-Cage Projector Locking Clamp The N-CAGE engages all four sides of the projector. The clamp is designed to give maximum protection and minimum inconvenience. Custom models can be manufactured to protect any projector. Please contact our design office to see if your model has been protected before. N-Circle and N-Square Universal Projector Locking Clamps 1.5m Heavy Duty Cable Kit 120dB Alarm The N-CIRCLE and N-SQUARE adjustable steel clamps entrap almost all models of modern overhead digital projector. The multi hole adjustable chassis allows the soft edged rings to closely grip the projector by its diagonally opposite corners whist the locking mechanism is shielded from attack by the chassis itself. An 11mm diameter multi strand steel cable 1500mm long with vinyl covering and stainless steel end stops is secured by a shielded heavy duty lock at the clamp end. At the structure a range of anchor fixings to concrete, timber and steelwork is provided with each kit. Longer cables available. The 120dB motion sensing alarm with microchip intelligence. The alarm is located within and protected by the clamp chassis. The alarm gives warning chirps to prevent accidental activation. Electronic key over ride while is standard. When coupled to the physical integrity of the heavy cable system maximum protection is achieved. Loxit Limited, First Avenue, Poynton Industrial Estate, Poynton, Cheshire, SK12 1YJ t: +44 (0) 845 519 5191 or +44 (0) 1625 856 801 f: +44 (0) 845 519 5192 e: [email protected] w: www.loxit.com