Transcript
IDE-SATA-SI Bi-directional IDE to SATA Adapter Extend your Hard Disk Lifespan. Looking for complete flexibility when adding your existing SATA or IDE interface Hard Disk(s) to your system? Introducing the new Dynamode IDE-SATA-SI. A discrete, PCB level adapter which simply connects to the rear interface of any SATA or IDE Hard Disk or other Mass Storage Device (MSD) without taking up valuable space inside your Desktop or Server chassis. Advanced features Discrete PCB for direct Storage Device attachment Needs no Drivers, converts at ‘Boot Time’ Single 40-Pin IDE Port; Two SATA Ports Single 4-Pint Power Connector Allowing ‘Boot Time’ level Storage attachment, the IDE-SATA-SI needs no software to be installed and converts SATA (Serial ATA) to ATA (Parallel ATA) and vice versa, quickly and with minimal fuss. Comes embedded with dual SATA Ports, one ATA/133 IDE type interface and a single 4-Pin Power Connector. Converts SATA to Parallel ATA Fully bi-directional in operation the device also comes with a unique status LED showing data activity together with bundled SATA-SATA data cable and 4-Pin to standard ‘Molex’ Power cable. Unique activity LED on PCB Converts Parallel ATA to SATA Supports ATA100/133 Specification Fully compliant with Serial ATA Specifications Bundled ‘Molex’ Power Cable and SATA Data Cable Available now from Dynamode authorized distributors and resellers © 2009 Dynamode UK Details correct at going to Press. E&OE All Trademarks Acknowledged. Further product details available from www.dynamode.net