Transcript
DATA SHEET Cool-stack I General Description A one rack-unit high cooler suitable for moderate heat loads. Available in exhaust or intake versions; both include a 90° thermal switch, or can accept a 12 volt trigger signal. Exhausts heated air or takes fresh air in through front panel. Extremely quiet. Features ? ? ? ? 1 RU high Thermal switch included; can also take 12 volt trigger signal Extremely low noise 1 year parts and labor warranty Use an exhaust Cool-stack I at the top of a rack and vent panels below heatgenerating components to exhaust heated air from moderate heat loads. For larger heat loads, add an intake version at the bottom of the rack to bring fresh air in. Specifications Parameter Air Flow Noise level Dimensions Power consumption Weight Part number Value 40 21 1.75H x 19W x 8D 4.5H x 48.3W x 20.3D 7 8/3.7 00-301-02 00-302-01 Units CFM dBA Inches cm Watts Lbs/kg Exhaust version Intake version Cool-stack and the ATM logo are registered trademarks of Active Thermal Management. All features and specifications subject to change without notice. 25570 Rye Canyon Rd., Valencia, CA 91355 www.activethermal.com (661) 294-7999; -1115 (f)