Transcript
PANTONE METALLIC 8402C PANTONE SOLID 382C OUTSIDE 3.77" 5.5" Warranty WE'RE HERE TO HELP YOU! NEED ASSISTANCE SETTING UP THIS PRODUCT? Make sure you: 1. Use the live chat at www.iogear.com to try and solve any issues you may be having with the product 2. Visit the Tech Info Library/FAQ on www.iogear.com (under the Support tab) 3. Call the 24/7 tech support line at 1-866-946-4327 (U.S. only) or 1-949-453-8782 Warranty Information This product carries a 3 Year Limited Warranty. For the terms and conditions of this warranty, please go to http://www.iogear.com/support/warranty or call 1-866-946-4327 Register online at http://www.iogear.com/register Important Product Information Product Model Serial Number Contact IOGEAR Inc. Address: 23 Hubble, Irvine, CA 92618 USA Toll Free: 866-9-IOGEAR Phone: 949-453-8782 Web site: www.iogear.com Email: [email protected] ‘About Us) é FUN IOGEAR offers connectivity solutions that are innovative, fun, and stylish, helping people enjoy daily life using our high technology products. é GREEN IOGEAR is an environmentally conscious company that emphasizes the importance of conserving natural resources. The use of our technology solutions helps reduce electronic waste. é HEALTH IOGEAR supports healthy and fit lifestyles. By integrating products with the latest scientific developments, IOGEAR’s solutions enhance the life of end-users. © 2009 IOGEAR, INC. INSIDE QuickiStart(e Te [= 5x2 HDMI Matrix Switch with Remote GHDMIMS52 PART NO. Q1083 Package Contents 1 x 5x2 HDMI Matrix Switch 1 x Remote Control 1 x Power Adapter 1 x Quick Start Guide 1 x Warranty Card Requirements * HD TVs or displays with HDMI connections e Digital media devices with HDMI connections [5x2 HDMI Matrix Switch 1. Port 1 LED (Red/Green) 10. Power Adapter Port 2. Port 2 LED (Red/Green) 11. Input 1 3. Port 3 LED (Red/Green) 12. Input 2 4. Рой 4 LED (Red/Green) 13. Input 3 5. Port 5 LED (Red/Green) 14. Input 4 6. Output A LED (Green) 15. Input 5 7. Output B LED (Red) 16. Output A 8. IR Receiver 17. Output B 9. Power LED (Blue) Remote Control 2 3 4 . Port 1 . Port 3 . Port 4 . Output A ort 2 5. P 6 7 . Port 5 . Output B LJ [Y [1/57 77 GHDMIMS52 Installation Please make sure your HD TVs or displays and HD media source are powered off before you start. Connect the power adapter to the power outlet and the HDMI matrix switch’s power adapter port. Input 3 Input 4 Input 5 Output B STEP 3 Connect HDMI cables to the input ports of your HD TVs and displays and the output ports of the HDMI matrix switch. STEP 4 Connect HDMI cables to the output ports from the HD media sources and the input port from HDMI matrix switch. Turn on your HD media sources and HD TVs or displays. Note: For DVI-D devices, for example, Mac Mini, a HDMI to DVI adapter (GHDMIFDVIM, not included) is required. Remote Control To switch input source on a display Simply press Output A or B, then press port number as desire. To swap input sources between 2 display Please note that you cannot swap the 2 sources directly between 2 displays because 1 input on 2 displays is not allowed. Please see below example to swap input sources between 2 displays. For Example: Current setting: Desire setting: Output A on Port 1 Output A on Port 2 Output B on port 2 Output B on Port 1 Procedure: 1. Switch Output À to either Port 3, 4 or 5 2. Switch Output B to Port 1 3. Switch Output A to Port 2 LED Indication Input LED will light up with the color that matches the color of the Output LED. For example, if you have Output A using Input 1. Input 1 LED will light up in Green.