Download Tripp Lite SmartRack Bolt-Down Kit - Secures stabilizing brackets or plates to facility floor
Transcript
SmartRack Bolt-Down Kit - Secures stabilizing brackets or plates to facility floor MODEL NUMBER: SRBOLTDOWN Highlights Bolt-down Kit for cabinets and racks Enables SmartRack to be secured to concrete floor Provides extreme stabilization and security Includes required nuts and bolts Package Includes Four concrete inserts, four bolts, four fender washers Description Tripp Lite's SmartRack SRBOLTDOWN provides extreme stabilization and security for cabinets and racks. The bolt-down kit enables SmartRack to be secured to a concrete floor. SRBOLTDOWN includes four concrete inserts, four bolts and four fender washers. Technical Notes: We recommend using a 1/2" concrete drill. Hole must be 4.5" to 4.75" deep. Mark the hole, drill the hole, then tap the anchor into the hole. Thread the bolt into the anchor a few threads only. Tap the bolt with a hammer (with anchor attached) until it bottoms out in the hole, then tighten the bolt. Features Provides extreme stabilization and security for cabinets and racks The bolt-down kit enables SmartRack to be secured to a concrete floor Includes four concrete inserts, four bolts and four fender washers Specifications General Info RoHS Y OVERVIEW Model Type Stabilization Accessories Type Bolt-Down Kit PHYSICAL Shipping Dimensions (hwd / in.) 1x4x4 Shipping Dimensions (hwd / cm) 2.54 x 10.16 x 10.16 1/2 Shipping Weight (lbs.) .90 Shipping Weight (kg) 0.41 WARRANTY Product Warranty Period (Worldwide) 5-year limited warranty © 2015 Tripp Lite. All rights reserved. All trademarks are the sole property of their respective owners. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice. Photos may differ slightly from final products. 2/2