Transcript
Type Nominal Dimension (with Sleeve) Applications Nominal Voltage Capacity Charging Condition Fast Charge Service Life Continuous Overcharge Weight Internal Resistance Max. Charging Voltage Ambient Temperature Range : Rechargeable Nickel Metal Hydride Cylindrical Cell : Φ = 10.5mm H = 44.5mm : Recommended discharge current 65 to 1950mA : 1.2V : Nominal: 650mAh Minimum: 630mAh Typical: 650mAh When discharged at 130mA to 1.0V at 20℃ : 65mA for 16 hrs at 20℃ : 325mA to 650mA (0.5 to 1C) charge termination control recommended control parameters: -∆V : 0-5mV **DT/dt : 0.8℃/min (0.5 to 0.9C) 0.8 - 1℃/min (1C) **TCO : 45 - 50℃ **Timer : 105% nominal input ** for ref. only : >500 cycles (IEC standard) : 65mA maximum current for 1 year. No conspicuous deformation and/or leakage : 13.0g : Average 35mΩ upon fully charged (Range 20 – 50mΩ) at 1000Hz : 1.5V at 65mA charging : Standard Charge : 0 to 45℃ Fast Charging : 10 to 45℃ Discharge : -20 to 50℃ Storage : -20 to 35℃ Model No.: GP65AAAHC Low Rate Discharge 1.5 1.4 1.3 1.2 1.1 1 0.9 0.8 0.7 Charge:65mA x 16hrs at 20°C 325mA (0.5C) 0 2 130mA (0.2C) 65mA (0.1C) 4 6 8 10 Discharge Time (Hrs) 12 14 Fast Charge (Charge control required) Voltage (V) 1.6 High Rate Discharge 650mA (1C) 1.5 o Charge:65mA x 16hrs at 20 C 1.4 325mA (0.5C) 1.3 1.2 1.1 1950mA 1300mA (3C) (2C) 0 20 40 650mA (1C) 60 80 100 120 140 160 Capacity Input ( % ) www.gpbatteries.com.hk The information (subject to change without prior notice) contained in this document is for reference only and should not be used as a basis for product guarantee or warranty. For applications other than those described here, please consult your nearest GP Sales and Marketing Office or Distributors. TRS0326 Rev.06 Manufacturer reserves the right to alter or amend the design, model and specification without prior notice. Copyright@GPI International Ltd. – All rights reserved