Download Super Talent Technology DuraDrive ET IDE 18, 16GB
Transcript
DuraDrive ET Series IDE Solid State Drive Overvie w Super Talent's DuraDrive ET SSD series represent the next generation in data storage. Thanks to a unique Flash disk control chip and premium NAND Flash memory, DuraDrive ET SSDs combine unprecendented vibration and shock tolerance with impressive speeds. Super Talent's patented Flash management techniques increase reliability and endurance, and through our software and hardware testing ensures quality of each DuraDrive ET SSD. The DuraDrive ET series is available in a wide range of form factors and capacities to fit any application. 128GB The Dura Drive ET SSD is geared specifically for applications that require high tolerance to environmental conditions. Example industries include: - Military / Aerospace - Embedded / Industrial Systems - Enterprise Computing - Medical Industry - Casino Gaming Performance Specifications Physical Specifications tur es Form Factor *Capacities Dimension 1.3’’ 1.8’’ 2.5’’ 1.3’’ 1.8’’ 2.5’’ IDE Interface Power Supply Package 1.3’’ / 1.8’’ / 2.5’’ 8GB – 32GB 8GB – 64GB 8GB – 128GB 50.8mm x 46.5mm x 8.9mm 69.9mm x 60.0mm x 7.5mm (9.6mm) 69.9mm x 100.2mm x 7.5mm (11mm) Up to PIO Mode 6 MDMA Mode 4 UDMA Mode 5 5.0Vcc ± 5% Complete metal housing Sequential Read Rate (max) Sequential Write Rate (max) Sequential Read IOPS Access Time 65 MB/sec (28 MB/sec for 1.3'') 50 MB/sec (26 MB/sec for 1.3'') 58,675 IOPS 0.1 ms Environmental Specifications Shock (operating) Vibration (operating) Altitude (operating) Operating Industrial Temp. Commercial 1500G 16G 120,000 ft -40°C to +85°C 0°C to +70°C Endurance Specifications Read Write 8GB 16GB 32GB 64GB 128GB Unlimited 43.8 yrs @ 50GB write-erase/day 87.7 yrs @ 50GB write-erase/day 175.3 yrs @ 50GB write-erase/day 350.7 yrs @ 50GB write-erase/day 701.4 yrs @ 50GB write-erase/day Reliability Specifications MTBF Data Reliability Data Integrity Wear Leveling Algorithm +1,000,000 hours Built-in EDC/ECC function 10 years Patent Pending © 2008 Super Talent Technology. Specifications subject to change without notice. US patent #6,547,130 #7,243,185 #7,301,776 #7,318,117 and others apply. *Usable capacity may be less than specified after formatting. www.supertalent.com ssd.supertalent.com p.1 DuraDrive ET Series IDE Solid State Drive Overvie IDE Flash w Drive Pin Assignment Power Segment PIN 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 odule F SYMBOL /RESET HD7 HD6 HD5 HD4 HD3 HD2 HD1 HD0 GND DMARQ /IOW /IOR WAIT /DMACK IRQ HA1 HA0 /CS0 /DASP Vcc GND tur es Ordering Information - 1.3'' Form Factor PIN 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 SYMBOL GND HD8 HD9 HD10 HD11 HD12 HD13 HD14 HD15 Key GND GND GND CSEL GND /IOIS16 a /PDIAG HA2 /CS1 GND Vcc N/C Capacity 8GB 16GB 32GB Industrial Temp FHD8GC13I FHD16GC13I FHD32GC13I Commercial Temp FHD8GC13M FHD16GC13M FHD32GC13M Ordering Information - 1.8'' Form Factor Capacity 8GB 16GB 32GB 64GB Industrial Temp FHD8GC18I FHD16GC18I FHD32GC18I FHD64GC18I Commercial Temp FHD8GC18M FHD16GC18M FHD32GC18M FHD64GC18M Ordering Information - 2.5'' Form Factor Capacity 8GB 16GB 32GB 64GB 128GB Industrial Temp FHD8GC25I FHD16GC25I FHD32GC25I FHD64GC25I FHD28GC25I Commercial Temp FHD8GC25M FHD16GC25M FHD32GC25M FHD64GC25M FHD28GC25M Revision History April 2, 2008 Rev-A Preliminary Product Specification Released © 2008 Super Talent Technology. Specifications subject to change without notice. US patent #6,547,130 #7,243,185 #7,301,776 #7,318,117 and others apply. ssd.supertalent.com p.2 DuraDrive ET Series IDE Solid State Drive Overvie w Specifications for 1.3'' DuraDrive ET SSD Mechanical 8.90 3.00 50.80 4-M2.5X0.45 BOTH SIDE 14.00 46.50 26.00 © 2008 Super Talent Technology. Specifications subject to change without notice. US patent #6,547,130 #7,243,185 #7,301,776 #7,318,117 and others apply. ssd.supertalent.com p.3 DuraDrive ET Series IDE Solid State Drive 0.111 2.82 0.116 2.750 69.85 2.498 63.45 M2.5 X 2.8[0.110] TAP MIN (4X) 2.130 [0.036 0.014] 0.91 0.35 0.126 3.20 [.399 0.015] 10.14 0.375 1.654 42 0.157 3.99 0.079 2 0.079 2 2.130 54.10 2.362 60 0.116 2.95 0.295 7.50 Overvie w Specifications for 1.8'' DuraDrive ET SSD (low capacity) Mechanical M2.5 X 2.8[0.110] TAP MIN (4X) © 2008 Super Talent Technology. Specifications subject to change without notice. US patent #6,547,130 #7,243,185 #7,301,776 #7,318,117 and others apply. ssd.supertalent.com p.4 DuraDrive ET Series IDE Solid State Drive 0.111 2.82 [0.036 0.014] 0.91 0.35 [.399 0.015] 10.14 0.375 0.116 2.95 2.750 69.85 2.498 63.45 M2.5 X 2.8[0.110] TAP MIN (4X) 2.130 54.10 0.126 3.20 1.654 42 0.157 3.99 0.079 2 0.079 2 2.130 54.10 2.362 60 0.116 2.95 0.378 9.60 Overvie w Specifications for 1.8'' DuraDrive ET SSD (high capacity) Mechanical M2.5 X 2.8[0.110] TAP MIN (4X) © 2008 Super Talent Technology. Specifications subject to change without notice. US patent #6,547,130 #7,243,185 #7,301,776 #7,318,117 and others apply. ssd.supertalent.com p.5 DuraDrive ET Series IDE Solid State Drive 4.07[0.160] 61.72[2.430] 10.14[0.399] 0.118 3 3.016 76.60 M3 X 4.0[0.157] MAX (4X) 3.016 76.60 3.945 100.20 0.382 9.70 0.551 14 69.85[2.750] 0.551 14 0.079 2 1.654 42 3.99[0.157] 0.079 2 0.295 7.50 Overvie w Specifications for 2.5'' DuraDrive ET SSD (low capacity) Mechanical M3 X 4.0[0.157] MAX (4X) © 2008 Super Talent Technology. Specifications subject to change without notice. US patent #6,547,130 #7,243,185 #7,301,776 #7,318,117 and others apply. ssd.supertalent.com p.6 DuraDrive ET Series IDE Solid State Drive 0.079 2 1.654 42 3.99[0.157] 4.07[0.160] 61.72[2.430] 0.382 9.70 10.14[0.399] 0.118 3 M3 X 4.0[0.157] MAX (4X) 3.016 76.60 3.016 76.60 100.20[3.945] 0.551 14 69.85[2.750] 0.551 14 0.079 2 0.433 11 Overvie w Specifications for 2.5'' DuraDrive ET SSD (high capacity) Mechanical M3 X4.0[0.157] MAX (4X) © 2008 Super Talent Technology. Specifications subject to change without notice. US patent #6,547,130 #7,243,185 #7,301,776 #7,318,117 and others apply. ssd.supertalent.com p.7