Download Atdec SPACEDEC Freestanding Quad

Technical Specifications
SPACEDEC
DISPLAY FREESTANDING QUAD
TM
Dimensions
NOTE: This product has been designed to mount 15” - 21” monitors.
42mm
(15/8”)
102mm
(4”)
ADJUSTABLE
5 Holes at
125mm (47/8”)
Intervals
775mm
(301/2”)
ADJUSTABLE
18mm
(3/4”)
142mm
(55/8”)
Minimum Footprint
The minimum Footprint of the DISPLAY FREESTANDING QUAD is determined by the width of your monitors. The minimum overall width
has been calculated using 15” Monitors.
385mm
(153/16”)
325mm
(127/8”)
455mm
(177/8”)
400mm (153/4”
645mm (253/8”)
Minimum overall width
Typical configuration for 15” Monitors
Maximum Footprint
The maximum Footprint of the DISPLAY FREESTANDING QUAD allows for Monitors measuring up to 21”.
Maximum overall width 972mm (383/8”)
560mm (22”)
287mm (111/4”)
473mm (185/8”)
458mm
(18”)
Typical configuration for 21” Monitors
Donut 42 Dimensions
Maximum Load: 11.5 kgs (25 lbs)
147mm (53/4”)
90mm (31/2”)
Plus or
Minus 40
Rotation
from
centre
42mm
(15/8”)
Plus or
Minus 40
Rotation
from
centre
35mm
(13/8”)
102mm (4”)
Due to continuing product development, the manufacturer reserves the right to alter specifications without notice. Published: 16.08.05 c