Download Atdec SPACEDEC Freestanding Hex
Transcript
Technical Specifications SPACEDEC DISPLAY FREESTANDING HEX TM Dimensions 42mm (15/8”) 100mm (37/8”) of TRAVEL From 605mm (237/8”) to 705mm (273/4”) 74mm (215/16”) 117mm (45/8”) 5 Holes at 125mm (47/8”) Intervals 843mm (333/16”) 100mm (37/8”) of TRAVEL From 225mm (87/8”) to 325mm (127/8”) 18mm (3/4”) 142mm (55/8”) 1308mm (511/2”) 391.50mm (153/8”) 525mm (203/4”) 391.50mm (153/8”) ADJUSTABLE ADJUSTABLE Long Pin Long Pin ADJUSTABLE Short Pin 888mm (35”) 356mm (14”) Typical Configurations 385mm (153/16”) 325mm (127/8”) Typical configuration for 15” Monitors 473mm (185/8”) 458mm (18”) Typical configuration for 21” Monitors Donut 42 Dimensions Maximum Load: 11.5 kgs (25 lbs) 117mm (45/8”) Plus or Minus 40 Rotation from centre 35mm (13/8”) 102mm (4”) Short Pin 90mm (31/2 ”) 147mm (51/4”) Plus or Minus 40 Rotation from centre 42mm (15/8”) Long Pin No portion of this document or any artwork contained herein should be reproduced in any way without the express written consent of Atdec Pty Ltd. Due to continuing product development, the manufacturer reserves the right to alter specifications without notice. Published: 15.02.08 ©