Transcript
Snap-In Modular WallPlates Cables To Go's flush mount Snap-In WallPlates are designed to insert snap-in modules for different configuration of jacks and connectors for maximum installation flexibility. The Snap-in Modules come in three sizes - 1/2in height, 1in height flat modules and 1-1/2in height 45-degree angled modules for bend radius protection of fiber and copper cabling. A single gang wall plate opening can accommodate three 1in flat modules or two 1-1/2in angled modules. The modules are a snap to install and remove, giving you a highly adaptable system. The Snap-in Modules can be easily snapped out of the front of the plate, so that changes can be made without removing the plate after installation. Write-on designation labels with clear plastic holders are included for system or station identification. Order Information #03417 Single Gang Snap-In WallPlate White #03419 Double Gang Snap-In WallPlate White #03717 Single Gang Snap-In WallPlate Ivory #03719 Double Gang Snap-In WallPlate Ivory Related Items Premise Plus tm #03841 #03871 #03890 #03916 #03947 #03873 #03913 #03791 #03784 Snap-In Surface Box White 2-port Blank Modular Insert 1in Ivory Blank Modular Insert 1½in Ivory F-Type Modular Insert White Angled MT-RJ Modular Insert White Blank Modular Insert Bevel Ivory 2-port Blank Modular Insert Bevel White 2-port Cat5e Keystone Jack White Single Gang WallPlate Mounting Bracket Specifications • • • • • • • Single Gang or Double Gang design Designed for Ethernet, Voice, Audio/Video, and other Applications Works with Cables To Go and compatible Snap-in Modules Write on station designation label Mounts to any electrical box, or to surface mount box; Compatible with NEMA standard openings and boxes Certifications: UL listed Lifetime Warranty Call 1-800-287-2843 or visit us at www.cablestogo.com
