Download StarTech.com IDE 44-Pin to Dual Compact Flash Adapter
Transcript
IDE 44 Pin to Dual Compact Flash SSD Adapter StarTech ID: IDE442CF This adapter features one IDE 44-pin male connector and two Compact Flash ports, allowing you to connect two Compact Flash (CF) type media cards to a laptop computer in place of a 2.5in IDE hard drive. A true Do-it-yourself SSD solution, the CF to IDE adapter allows Compact Flash, Compact Flash 2, or MicroDrive media to be used as a bootable hard drive on a notebook computer and requires no software or driver installation. Applications and Solutions • Ideal for system builders and testers requiring a convenient way to swap drives and operating systems • Use two Compact Flash cards as one bootable 2.5 inch IDE hard drive Features • All-in-one onboard solution takes care of conversion. No software/drivers or cables required • Compatible with CFI/II, MicroDrive™ • Convert your CF for use as a SSD (solid state drive) • On-board LED to show drive status • Reading-performance, anti-shock ability and tolerance of the the temperature difference are better than traditional hard drives • Use your Compact Flash cards to act as the primary bootable device • With no moving parts, provides a silent operation that is resilient to environmental factors while reducing overall power consumption Technical Specifications • Warranty: Lifetime warranty • Connectors: 2 x Compact Flash Slots • 1 x IDE 44 pin (2.5 inch drive connector) • Cards Supported: Compact Flash Type I, and II, and MicroDrive • NOTE: Hot swapping not supported • Carton Quantity: 40 • Shipping (Package) Weight: 0.31 lb [0.14 kg] • Product Weight: 0.71 oz [20 g]