Download Otterbox 1910 PDA Case for HP iPAQ 6500/6900

OTTERBOX 1910 CASE
$69.95
1910 CASE
OtterBox’s waterproof, crushproof, drop-proof design economically ruggedizes the HP
iPAQ 6500 or 6900 Series.
Great for customers and any industry requiring the user to take their iPAQ into harsh
conditions. The OtterBox 1910 Case integrates strength, flexibility, and style without
compromising features, size or quality.
Gore™ Water-resistant Vent
for Phone Speaker
Rubber
Over-molding
for Optimum
Grip in All
Weather
Conditions
Flexible
Fully-sealed
Replaceable Screen
membrane
Easy-access
to SD Card
Slot (on 6500
version)
Accessory
Pods available
for protecting
SD Barcode
Scanners and
Peripherals
Waterproof keyboard
buttons activate iPAQ
data entry keys
Headphone
and
Headset
Gore
Access
Waterresistant
Vent for
Phone
Microphone
www.otterbox.com
888-695-8820
Easy Access
to Sync and
Charge
Connections &
Reset Buttons
970-493-8446
OTTERBOX 1910 CASE
FEATURES
Durable hinge
ensures sealed
closure
External
Stylus
Holder
Clear lens for
usability of
camera and
flash through
the case
Raised, deep
back allows use of
extended battery or
standard battery
WARRANTY
Otter Products, LLC products
come with an Unconditional
Lifetime Warranty. Warranty
includes replacement of the
case only. Otter Products cannot be held liable for damage to
personal property due to misuse
or improper care and maintenance of case and o-ring seals.
Otter Products warranty does
not, under any circumstance,
cover the replacement or cost
of any electronic device or personal property inside or outside
of the case.
Call us at (888) 695-8820
or e-mail us at
[email protected]
1 Old Town Square, Suite 303
Fort Collins, Colorado 80524
(888) 695-8820
www.otterbox.com
Easy-open
Compound
Latches
OTTERBOX 1910 CASE TECHNICAL FEATURES
FEATURES
Custom fit to HP iPAQ 6500 and 6900 Series
Case has integrated keyboard for use of
all iPAQ keyboard functions
Waterproof and dustproof while in use
Accessory POD available to allow use of
SD barcode readers
Replaceable screen membrane protects the
iPAQ touchscreen from scratches while
providing easy access to the screen
GPS, Bluetooth and cell phone reception
fully operational through the case with no interference in transmission or signal
Removable plug for headphone/headset
access
Sealed bottom hatch provides access to iPAQ
sync and charge connectors
Gore™ membrane vent for heat and pressure
dissipation and speaker and microphone
usability
External stylus holder
Compound latches for easy opening and
secure closing of the case
Glass-reinforced Polycarbonate shell for maximum strength and durability
Thermoplastic rubber overmolding for high grip
and impact absorption
ENVIRONMENTAL PROTECTION
Drop and Shock
MIL-STD 810F, Method 516.5, Procedure 4
(Four foot drop to concrete, all surfaces, edges
and corners)
Water Protection
MIL-STD 810F, Method 512.4, Procedure 1,
Immersion
IP67 rating for water and dust intrusion. Water
testing per IEC 60529 Edition 2.1, Temporary
Immersion (30 minute immersion at 1 meter
depth)
Dust Intrusion
MIL-STD 810F, Method 510.4, Procedure 1
(Blowing Dust)
IP67 rating for water and dust intrusion. Dust
testing per IEC 60529 Edition 2.1, Section 13.4
(Blowing Dust)
ADDITIONAL INFORMATION
Optional Accessories
Belt Clip - heavy duty, full size belt clip for allday use
Screen Replacement Kit - allows for the
replacement of the screen membrane
Dimensions (Case only)
5.7” L x 3.7” W x 1.6” D
(144.8 mm x 93.9 mm x 406 mm)
Weight (Case only)
0.6 lb. (.27 kg)