Download Lenco DVR-100

DVR-625
DVD RECORDER
DVD + ReWritable
Manufactured under license from Dolby Laboratories."Dolby",
"Pro Logic"and the double-D symbol are trademarks of Dolby
Laboratories.Confidential Unpublished Works.
C 1992-1997
Dolby Laboratories,Inc.all rights reserved.
DVD + ReWritable
Trouble shooting Guide
Check the following guide for a possible correction to a problem
before contacting customer service.
SYMPTOMS AND CORRECTION
Correction
Symptom
No power
Connect the power plug into the wall outlet securely.
No picture
Verify the connection from the DVD video output to the TV video input. Then
Switch TV to appropriate mode(video 1)
Connect the video cable into the jacks securely. Refer to your television
owners manual.
No sound
Connect the audio cables into the jacks securely.
Verify the connection from the DVD audio output to the TV or receiver audio
input. Then switch to the appropriate source on the receiver. Refer to your
Audio amplifier owners manual.
Black & White
picture
The playback
picture Has
occasional distortion
Damaged S connector (bent pin)
A small amount of picture distortion may appear because of a poor quality
video/sound transfer to disc. This is especially true of some discs
Manufactured between 1997-1998.
Scratched disc
Brightness is
unstable or noises
are produced on
playback pictures
Connect the DVD player directly through the TV and not through any other
source. What you're viewing is the effect of the copy protection circuitry
Required on all DVD players.
If you don't have a video input on your TV, you must purchase an Therefore
Adapter from your dealer.
The DVD video
player does not start
playback
Place the disc with the graphics side up.
Place the disc on the disc tray correctly inside the guide.
Make sure the disc is free from scratches & fingerprints.
Press the SETUP button to turn off the menu screen.
Cancel the parental lock function or change the parental lock level. (The
Pre-set password is 3308.)
Turn the power off then disconnect the power plug and reinsert it back into
the wall. Retry again.
Use region 1 discs only.
MP3 won't read disc
or It skips
Return disc as the software edition used may not be compatible with the
player. Check web site for instruction.
Use new editions of software such as Voyetra Audiostation 4, Adaptec's
Easy CD Creator , NTI or Roxio's Toast Titanium.
Make sure MP3 file are not encoded with a variable bit rate such as
provided by Real Networks.
The remote control
does not work
Properly
Replace the batteries with new ones.
The recorder cannot
record.
The
The
The
The
Some keys do not
work
The type of the disc is wrong, it's not a DVD+RW or DVD+R disc.
The unit is in record mode or it is recording.
The image is
distorted.
The setup of interlaced or Progressive is wrong.
Press the I/P button to switch from each other.
type of the disc is wrong, it's not a DVD+RW or DVD+R disc.
disc is recorded full.
disc (DVD+R,DVD+RW) is locked, it should be unlocked.
DVD+R has been finilized.
33
Specifications
Safety Precautions
DVD Player
TV System
Compatible Discs
NTSC/PAL
DVD+R, DVD, CD, Mp3,
DVD+RW,CD-R, CD-RW
Recordable discs format
DVD+RW, DVR+R
Resolution Ratio
Greater Than 500 lines
Video S/N Ratio
65dB
Frequency Response
fs (96KHz/24bit)
4Hz - 44KHz:+/-2dB
Audio S/N Ratio
95dB
Degree of Distortion
<0.01%
D/A Converter
192KHz/24bit
Video Out
1Vp-p
S-Video Out
Y: 1Vp-p(75 )
C: 0.3Vp-p(75 );
Audio Out
2.0V
5.1 Channel,2Channel mixed
Digital Audio Output
Connections
Remote Control
Transmitter
Signal Range
Power Source
General
Power Supply
Consumed Power
Standby Power
Size (WxHxD)
Infrared Ray
Approximately 15'
2 " AAA " Batteries
AC 230V 50Hz
35W
<3W
430 x48x 308 mm
Because its products are subject to continuous
improvement, We reserves the right to modify
product design and/or specifications without
notice and without incurring any obligations.
The lightning flash with an arrowhead symbol within an
equilateral triangle is intended to alert the user to the
presence of uninsulated dangerous voltage within the
product's enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOTREMOVE COVER (OR BACK).
NO USER-SERVICEABLE PART INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL
WARNING:
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE, DUE TO THE HIGH RISK OF FIRE
OR ELECTRIC SHOCK, DO NOT OPEN THE CABINET DANGEROUS HIGH VOLTAGES ARE
PRESENT INSIDE THE ENCLOSURE. ONLY QUALIFIED SERVICE PERSONNEL SHOULD
ATTEMPT THIS.
CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, AND FULLY
INSERT.
CAUTION:
This Digital Video Player employs a Laser System. To prevent direct exposure to the laser beam, do
not try to open the Enclosure Visible laser radiation emits when open and interlocks are defeated.
Use of controls, adjustments or performance of procedures other than those specified herein may
result in hazardous radiation exposure.
DO NOT STARE INTO BEAM.
Optical, Coaxial
YUV, SCART, CVBS
USB, DV, S-Video
To ensure proper use of this product, please read this owner's manual carefully and retain for future
reference. Should the unit require maintenance, contact an authorized service location. Only qualified
service personnel should remove the cover.
CLASS 1
LASER PRODUCT
32
CAUTION
RISK OF ELECTRIC SHOCK
DO NOTOPEN
Since it is very usual for DVD movies to be released at different times in different regions of the world, all players have region codes and
disks can have an optional region code. If you load a disk of a different region code to your player, you will see the region code node
notice on the screen. The disk will not play, and should be unloaded.
1
Editing
Safety Information
CAUTION: Use of controls or adjustments or performance of procedures other than those specified herein may result in
hazardous radiation exposure.
Please carefully study this manual and always keep it available. There are, however, some installation and operation precautions
which You should be aware of.
1.Read Instructions - All the safety and operating instructions should be read before the product is operated.
2.Retain Instructions - The safety and operating instructions should be retained for future reference.
3.Heed Warnings - All warnings on the product and in the operating instructions should be adhered to.
4.Follow Instructions - All operating and use instructions should be followed.
5.Cleaning - Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp
cloth for cleaning.
6.Attachments - Do not use attachments not recommended by the product manufacturer as they may cause hazards.
7.Water and Moisture - Do not use this product near water - for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a
wet basement; or near a swimming pool; and the like.
8.Accessories - Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious
injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the
manufacturer, or sold with the product. Any mounting of the product should follow the manufacturer s instructions, and should use a
mounting accessory recommended by the manufacturer.
9.Aproduct and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the
product and cart combination to overturn.
1 0. Ventilation - Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to
protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the
product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or
rack unless proper ventilation is provided or the m a n u f a c t u r e r s instructions have been adhered to.
11.Power Sources - This product should be operated only from the type of power source indicated on the marking label. If you are not
sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate
from battery power, or other sources, refer to the operating instructions.
12.Grounding or Polarization This product may be equipped with a
polarized alternating-current line plug (a plug having one blade wider than
the other). This plug will fit into the power outlet only one way, This is a
safety feature. If you are unable to insert the plug fully into the outlet, try
reversing the plug. If the plug should still fail to fit, contact your electrician to
replace your obsolete outlet. Do not defeat the safety purpose of the
polarized plug.
Alternate Warnings This product is equipped with a three-wire groundingtype plug, a plug having a third (grounding) pin. This plug will only fit into a
grounding-type power outlet. This is a safety feature, If you are unable to
insert the plug into the outlet, contact your electrician to replace your
obsolete outlet. Do not defeat the safety purpose of the grounding-type plug.
13.Power-Cord Protection Power-supply cords should be routed so that
they are not likely to be walked on or pinched by items placed upon or
against them, paying particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the product.
14.Protective Attachment Plug The product is equipped with an attachment
plug having overload protection. This is a safety feature. See instruction
Manual for replacement or resetting of protective device. If replacement of
the plug is required, be sure the service technician has used a replacement
plug specified by the manufacturer that has the same overload protection as
the original plug.
2
EDITING A DISC OF A DVD+RW
1.Insert a DVD+RW on the disc tray.
2.Press the DISC OPER button to access
the disc editing menu.
3. With each icon highlighted by pressing
the UP/DOWN button, the corresponding
description of each operation will display
on the screen, such as Erase disc, Rename
disc, Record a new title, Overwrite disc, etc.
DVD+R Display
DVD+RW Display
Play
Erase disc
Rename disc
Record a new title
Overwrite disc
Lock disc
Play
Rename disc
Finalize disc
Record a new title
4. Press the SELECT button to run the operation.
EDITING A DISC OF A DVD+RW OR DVD+R
Play
Press the SELECT button to playback from the disc.
FIGURE A
EXAMPLE OF ANTENNAGROUNDING
AS PER NATIONALELECTRICAL CODE
ANTENNA
LEAD
WIRE
GROUND
CLAMP
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
ELECTRIC
SERVICE
EQUIPMENT
ERASE (only DVD+RW )
Press the SELECT button to begin erasing.
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUD CLAMP
NEC-NA TIONALELECTRICAL CODE
S2898A
Erase disc
POWER SERVICE
GROUNDING ELECTRODE
SUSTEM
(NEC ART 250, PART H)
15.Outdoor Antenna Grounding - If an outside antenna or cable system is connected to the product, be sure the antenna or cable
system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National
Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding
of the lead-in wire to an antenna discharge unit, size or grounding conductors, location of antenna-discharge unit, connection to
grounding electrodes, and requirements for the grounding electrode.
16.Lightning - For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods
of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to
lightning and powerline surges.
17.Power Lines - An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or
power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should
be taken to keep from touching such power lines or circuits as contact with them might be fatal.
1 8.Overloading - Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire
or electric shock.
19.Object and Liquid Entry - Never push objects of any kind into this product through openings as they may touch dangerous voltage
points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.
20.Servicing - Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or
other hazards. Refer all servicing to qualified service personnel.
2 1.Damage Requiring Service - Unplug this product from the wall outlet and refer servicing to qualified service personnel under the
following conditions:
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the product.
c. If the product has been exposed to rain or water.
d. If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the
operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a
qualified technician to restore the product to its normal operation.
e. If the product has been dropped or damaged in any way, and
f. When the product exhibits a distinct change in performance - this indicates a need for service.
22.Replacement Parts - When replacement parts are required, be sure the service technician has used replacement parts specified
by the manufacturer or have the same charateristics as the original part. Unauthorized substitutions may result in fire, electric shock,
or other hazards.
23.Safety Check - Upon completion of any service or repairs to this product, ask the service technician to perform saftey checks to
determine that the product is in proper operating condition.
24.Wall or Ceiling Mounting - The product should be mounted to a wall or ceiling only as recommended by the manufacturer.
25. Heat - The product should be situated away from heat sources such as radiators, heat registers, stoves or other products
(including amplifiers) that produce heat.
Rename disc
Press the direction keys (UP/DOWN/RIGHT/LEFT)
to highlight the one which you want to input, and press
the SELECT button to confirm it.
The control bars of the last line in the keyboard is for
edit command. Select OK to save the name.
Note:
The maximum length of the title name is up to
9 characters.
Disc name
W_
A B C D E F G H I J K 0 1 2
L M N O P Q R S T U V 3 4 5
W X Y Z ( ) _ : ? . 6 7 8 9
Space Caps BkSp Delete Clear
Exit
OK
Lock disc
LOCK(only DVD+RW )
When the icon display LOCK, it shows you can lock your current disc. If you have locked
Your disc, you can't make any changes any more except play it back, but you can unlock
it by UNLOCK.
Record a new title
Press the UP/DOWN button to highlight the: Record a new title icon, then press the SELECT
button, the recorder will change to TV state.
Finalize disc
Finalize (only DVD+R)
Highlight the icon and press the SELECT button. It will take a few minutes to finalize the disc.
Note:
If a DVD+R has been finalized, you can not record or edit DVD+R any more. If you want
to make your disc compatible with the other DVD player, you should go on FINALIZE
operation.
31
Introduction
Editing
TITLE ICON AND SPLIT TITLE
From the control bar, select the sixth icon, press the SELECT button .
When you want to set the current frame as the icon of the current title which miniature picture will
appear in the Index Picture Screen, Press the SELECT button with
Index picture displayed.
From the control bar, select the seventh icon, press the SELECT button .
When
is selected by pressing the SELECT button, a new title marker will be
Split title
added to the current point.
Play title
Erase title
Edit title
Erase title
Overwrite title
Overwrite disc
Append title
2.Use the direction keys to highlight the title which
you want to edit.
3.Press the RIGHT button, the edit bar appears on
the screen while playing back.
Press UP/DOWN to highlight one icon and SELECT it.
4.From the control bar, select the fourth icon, press
the SELECT button .
On the screen, there appears a keyboard:
A B C D E F G H I J K 0 1 2
L M N O P Q R S T U V 3 4 5
W X Y Z ( ) _ : ? . 6 7 8 9
Exit
OK
Press the direction keys (UP/DOWN/RIGHT/LEFT) to highlight the one which you want to input, and
press the SELECT button to confirm it.
The control bars of the last line in the keyboard is editing command.
Select OK to save the name.
30
DVD + ReWritable
DVD + R
If any item should be damaged or missing, please inform your supplier without delay.
Keep the packaging materials as you may need them to transport your player in the future.
TITLE_
Note:
The maximum length of the title name is up to 9 characters.
MP
First check and identify the contents of your player package, as listed below:
- DVR-625
- Remote control
- RCA cables (3) x2 (1 yellow, 1 red, and 1 white)
- Owner s manual
Title name
Space Caps BkSp Delete Clear
What s more, as a DVD Video Recorder, it has some of the
key features that allow you to record programs conveniently
such as:
A complete DVD+RW/DVD+R recorder.
Preset recording
Playback of pre-recorded or user-recorded DVDs and CDs
View, edit and play from a pre-recorded DVD+RW.
DIGITAL AUDIO
UNPACKING
When shipping the player, the original shipping carton and packing comes in handy. For
maximum protection, re-pack the unit as it was originally packed at the factory. It is normal for
your changer tray to partially open after you have unpacked the unit. This is a feature designed
to allow easier access to disc inside the tray during diagnostics.
EDIT TITLE NAME
1.Insert a recorded DVD+RW on the disc tray.
The Index Picture screen pops up.
Your DVR-625 Design combines the function alities of a DVD
player and recorder. As a DVD player, you will be able to
enjoy full length movies with true cinema picture quality,
and stereo or multichannel sound (depending on the disc
and your playback system). Unique features of this player
include Scart & S-video outputs for greater
picture clarity.
WHERE TO PLACE YOUR DVD RECORDER
1. Place the unit on a firm, flat surface.
2. When you place this player near a radio or VCR the playback picture may become poor and/or
distorted. In this situation, move the DVD video player away from the other units.
3. Keep away from direct sunlight & domestic heating equipment.
4. If placed in a cabinet, please allow at least 2.5 cm (1 inch) of free space around the player for
proper ventilation.
TO OBTAIN A CLEAR PICTURE
This player is a high-tech, precision device. If the optical pick-up lens and disc drive parts are
dirty or worn down, the picture quality will become poor. To obtain a clear picture, we recommend
regular inspection and maintenance (i.e. cleaning or parts replacement) every 1,000 hours of use
depending on the operating Environment. For details, please contact your nearest dealer.
3
Table of Contents
Editing
Safety Precautions
1
How to set titles, chapters, or
Safety Information
2
tracks in a favorite order
20
Introduction
3
How to display subtitles
21
Table of Contents
4
How to play the U-DISC
21
Front panel
5
How to play the digital vidicon
21
Rear Panel
5
Checking the operational status
22
Delete marker
The remote control
6
Using the volume or mute function
22
Delete all markers
C onnection for audio output
8
Setting the parental lock
23
C onnection for video output
9
To change your password
23
Displaying the setup menu screen
24
Channel search
25
Setup record quality
25
11
Normal recording
26
C onnection for USB port
11
One-touch record
26
Playing a Normal Disc
12
How to switch to playback mode
26
Playing a DVD+RW or DVD+R Disc
12
Clock setup
26
Navigation function
13
Timer record
27
General Features
14
Editing title of DVD+RW
28
Locating a title using the title menu
15
Chapter editing
29
Locating a specific chapter or track
15
Chapter hide unhide
29
Locating a title
16
Title icon and split title
30
How to repeat a title, chapter, or track
17
Edit title name
30
How to repeat a specific segment
17
Editing a disc of a DVD+RW
31
Playing titles in random order
18
Editing a disc of a DVD+RW or DVD+R
31
How to change the camera angle
19
Specifications
32
Trouble Shooting Guide
33
C onnection for DV signal(DV rear input)
10
C onnection for av signal(a/v front input)
How to select a language & Playback
audio setting
4
CHAPTER EDITING
From the control bar, select the fourth icon, press the SELECT button repeatedly. It will cycle
as follows:
Chapter marker
Insert marker
When Insert marker is selected by pressing the SELECT button, a new chapter marker will
be added to the current point.
Delete marker is selected by pressing the SELECT button, the marker of the current
When
chapter will be deleted.
When Delete all markers
markers will be deleted.
is selected by pressing the SELECT button, all of the chapter
Note:
From the second icon in the control bar, the above operation can be viewed.
If only one chapter is available in the current title, there is only Insert marker to select.
CHAPTER HIDE OR UNHIDE
From the control bar, select the fifth icon, press the SELECT button.
Hide chapter , it shows the current chapter is visible, and you
When the icon displays
can select it to hide it by pressing the SELECT button.
Unhide chapter
When the icon displays
, it shows the current chapter is invisible, and you
can select it to unhide it by pressing the SELECT button.
19
29
Identification of Controls
Editing
FRONT PANEL
EDITING A TITLE OF DVD+RW
1.Insert a recorded DVD+RW on the disc tray.
The Index Picture screen pops up.
View current title/total title
2.Use the direction keys to highlight the title
which you want to edit.
View current chapter/total
chapter
3.Press the EDIT button, the edit bar appears
on the screen while playing back.
Press the RIGHT/LEFT button to highlight one icon
and enter it, press the UP/DOWN button to select a
sub-item.
EDIT MODE
Title:04/04
Chapter:01/01
PLAY
Chapter marker
Hide chapter
Index picture
Split title
2 3
1
5
4
6
7
8
10
9
DVR-625
USB
DV INPUT
STANDBY/ON
OPEN/CLOSE
RECORD
Title:04/04
13
11
12
Chapter:01/01
Current operation status
PLAY
Chapter editing Select to add one
chapter, or delete the current/all
chapters, details see the next page.
Chapter marker
1.STANDBY/ON BUTTON
8. PAUSE BUTTON
2.STANDBY LED
9.SOURCE BUTTON
3.IR(REMOTE SENSOR)
10.RECORD BUTTON
4.DVD DOOR
11.DIGITAL VIDICON INPUT
5.OPEN/CLOSE BUTTON
12. STOP BUTTON
6. VFD DISPLAY
13.USB PORT
7 .PLAY BUTTON
Chapter hide or unhide Select to
hide the current chapter,, details
see the next page
Hide chapter
Title face or Title name Select to
set the current image played back to
the face of the title or select to name
the current title, details see the next
page.
REAR PANEL
1
VIDEO
VIDEO OUTPUT
AUDIO OUTPUT
INPUT
IN
Index picture
L
SL
C
L
VIDEO
Cb/Pb
Y
DIGITAL
OUTPUT
230V~50Hz
T- Elapsed: 0:00:02
OUT
Divide current to 2 titles at current
point
TV75
ANTENNA
2
S-VIDEO
3
4
R
SW
SR
5.1CH
5
6
R
S-VIDEO
7 8
Cr/Pr
13
COAXIAL
9
OPTICAL
10
SCART INPUT
11
SCART OUTPUT
12
Split title
Title Timer
T- Elapsed: 0:00:02
4.Press the EDIT button again to quit
the menu.
1. RF SIGNAL INPUT
7. COMPOSITE VIDEO OUTPUT
2. RF SIGNAL OUTPUT
8. S-VI DEO OUTPUT(REAR)
3. COMPOSITE VIDEO INPUT(REAR)
9. DIGITAL AUDIO-COAXIAL OUTPUT
4.S-VIDEO INPUT
10. DIGITAL AUDIO- OPTICAL OUTPUT
5. AUDIO INPUT (REAR LEFT/RIGHT)
11. SCART INPUT
6. 5.1CH AUDIO OUTPUT
12. SCART OUTPUT
(L, R, SL, SR, C, SW )
13.COMPONENT VIDEOS OUTPUT
(Y, Cr/Pr, Cb/Pb)
28
5
THE REMOTE CONTROLLER
Recording Options
22
23
24
REMOTE CONTROL
TIMER RECORD
OPEN/CLOSE
THE INSTRUCTIONS BELOW DESCRIBE THE
FUNCTIONS OF THE REMOTE CONTROL
STANDBY/ON
25
1
PS/IS
SCAN
1.First setup the clock of your system as “CLOCK SETUP” on page 26.
It is recommended to setup your local date and time.
OPEN/CLOSE
STANDBY/ON
MUTE
PS/IS
1
3
2
4
2.Press the TIMER button, the record scheduler will pop up.
2
T IO N
ALI
FIN
7
SELECT
TY
ALI
DIS
9
10
AUDIO
ANGLE
CO
ERA
PER
SUBTITLE
SETUP
REPEAT
PROG
RANDOM
13
14
RETURN
P
PREV
NEXT
DV
VOL
P
TV
19
PLAY
37
38
40
FWD
42
43
REC/OTR
STOP
PAUSE/STEP CHANNEL
/
NAVI
GATIO
MENU
N
ZE
AR
A LI
Start
End VPS/
12/01/03 14:41
DAILY 07:03
12/31/03 12:44
FI N
D IS
15:11 ON
08:33 OFF
13:05 ON
TIMER
SELECT
LI TY
SP
SP
HQ
Date
CO
ER A
PE R
SE
SETUP
ANGLE
SUBTITLE
TITLE
SLOW
REPEAT
PROG
RANDOM
RETURN
+
P
PREV
REV
REC/OTR
STOP
5
6
NEXT
DV
PLAY
STOP
VOL
P
TV
SOURCE
FWD
PAUSE/STEP CHANNEL
/
DVD + ReWritable
Note:
If you want to delete a schedule, highlight the one, press the ADD/CLEAR button.
3.Use the UP/DOWN button to select one schedule, and press the SELECT button to access
Item Editor as below:
In each item you can also use direction keys to highlight and press the SELECT button to
choose your setting:
Item Editor
41
REV
17
18
35
39
SOURCE
15
16
33
DV
Rear CVBS
Ch057
/C LE
36
+
11
12
1
W 2
W 3
4
32
34
SE
SLOW
TITLE
30
Quality
AD D
AUDIO
W
31
QU
8
28
29
ER
6
IG A
MENU
TIM
5
/
N AV
ZE
4
ADD
AR
CLE
Source
0
Q UA
26
8
GOTO
ER
SELECT
27
ZOOM
ZOOM
4
7
IT
0
Record scheduler
3
DISPLAY
ED
9
3
2
6
MUTE
TI M
8
GOTO
IT
6
7
DISPLAY
6
ED
1. OPEN/CLOSE
2. NUMBERS(0-9)
3. ZOOM
4. ADD/CLEAR
5. DIRECTION(UP)
6.FINALIZE
7. DIRECTION(LEFT)
8. EDIT
9. DISC OPER
10.AUDIO
11.ANGLE
12.SUBTITLE
13.TITLE
14.REPEAT
15.PROG
16.PREV
17.NEXT
18.REV
19.PLAY
20.REC/OTR
21.STOP
22.PS/IS
23.SCAN
24.MUTE
25.STANDBY/0N
26.GOTO
27.DISPLAY
28.MENU
29.NAVIGATION
30.TIMER
31.DIRECTION(RIGHT)
32.SELECT
33.QUALITY
34.DIRECTION(DOWN)
35.ERASE
36.SETUP
37.SLOW
38.VOL(+)
39.VOL(-)
40.RETURN(P P)
41.RANDOM
42.SOURCE
43.TV
44.DV
45.CHANNEL(UP)
46.FWD
47.CHANNEL(DOWN)
48.PAUSE/STEP
1
5
9
5
SCAN
44
45
20
46
21
47
4. Press the UP button to highlight the code icon
and input the G-Code number, then press the select
button and the confirm icon will highlight, press the
select button to confirm.
H you know the G-Code , please
enter it, press RETURN will
return to timer recording list
and press TIMER will exit timer
recording edit mode
48
Confirm
Cancel
DVD + ReWritable
Item Editor
Signal input source, details see page 26,step 3.
Record frequency, once, daily or weekly.
Mm/dd/yy
Start time for recording
End time for recording
Record quality, details see
page 26 setup record quality.
Source
ONCE
Start
End
Quality
VPS/PDC
Confirm
DV
0 1/ 0 1 /0 0
14:41
15:11
SP
ON
Cancel
VPS/PDC function ON/OFF
3.Highlight the item and press the SELECT button to Confirm to save your setting.
4.In five minutes before it is ready to record the scheduled, it appears a Record Prompt dialog,
affirm select Confirm, abolish select CANCEL, and if without operation for a moment it will
record the scheduled automatically.
Note:
In standby mode, your recorder can wake up in 2 minutes before recording.
During recording, you can press the STOP button to suspend the recording.
A DVD+RW/DVD+R can record for MAX up to 360 minutes.
27
Recording Options
THE REMOTE CONTROLLER
NORMAL RECORDING
1. Make connections illustrated as page8 -11.
2. Insert a recordable DVD+RW or DVD+R into the recorder.
3. Press the DV. TV or SOURCE button to select the input source which you have connected
as step 1.
R-CVBS: Rear Audio/Video Input (on the rear panel)
SCART: Rear SCART input (on the rear panel).
R-SV: Rear S-Video (on the rear panel)
TV: (you can select it by pressing CHANNEL+/- or input the assigned number of the
channel to select your desired one directly)
DV: Digital vidicon
4. Press the REC/OTR button to start recording.
If you want to stop recording, press STOP.
If the DVD+RW or DVD+R is new, it will take about three minutes to stop.
Battery Installation
1. Push downward and outward the leaf spring
to remove the battery compartment cover.
2. Insert two size AA batteries according to the
"+" and "-" markings.
3. Make sure the batteries have been properly
installed, then close the battery compartment cover.
Notes:
Do not mix different types together, or old
batteries with new batteries.
While the remote controller will not be used for
an extended period of time, remove the batteries to
prevent possible corrosion.
To prevent corrosion resulting in damage,
remove exhausted batteries immediately. Where
the remote controller doesn't appear to operate
normally, replace both of the batteries.
Typical life for the batteries provided with this
product is about 6 months. The life expectance may
vary according to the use status.
ONE-TOUCH RECORD
1. During normal recording, press the REC/OTR button, the recorder will automatically stop in
30 minutes.
2. The recording time will extend for another 30 minutes with each press.
The length of recording time is determined by disc capacity and record quality.
With your setting, if it will exceed the capacity of the disc, OTR will be canceled,
and switched to normal record.
OPEN/CLOSE
STANDBY/ON
PS/IS SCAN MUTE
1
2
3
5
6
7
9
0
4
8
DISPLAY
ZOOM
D /C
LE AR
NAVI
GATI
ON
Use of the remote controller
MENU
3. If you want to stop recording, press the STOP button.
ER
F IN
T IM
A LI
ZE
AD
GOTO
IT
QU
ED
A LI
TY
SELECT
D IS
AUDIO
CO
PE
ER
R
ANGLE SUBTITLE TITLE
AS
E
SETUP
SLOW
+
REPEAT PROG RANDOM RETURN
P
PREV
NEXT
REV
REC/OTR
REC/OTR
DV
PLAY
STOP
TV
VOL
P
SOURCE
FWD
PAUSE/STEPCHANNEL
/
DVR-625
USB
DV INPUT
OPEN/CLOSE
STANDBY/ON
RECORD
DVD + ReWritable
P
AP
5M
HOW TO SWITCH TO PLAYBACK MODE
When the recording have finished, you can press the PLAY button to switch to normal playback mode.
CLOCK SETUP
STA
OP
EN /C
LO SE
PS /IS
1. During stop status, press the SETUP button to access the Setup Menu.
SC
MU
AN
ND
BY /O
TE
N
4
3
8
2
7
1
6
DIS
GO
TO
PL AY
5
ME
0
NU
NAVIGATION
9
LE
AR
TI M
ED
QUALITY
CT
IT
DISC OPER
AN
0 1/0 1/0 0
SLO
GL
E
SU BTI
RE TUR
RA ND
P
L
N
P
SO
1
UR CE
TV
AT
DV
NE XT
FW
D
PL AY
RE V
PA
STO
US E/S
P
TEP
CH
AN NE
/
OT R
DV
4. With Time (hh:mm:ss) highlighted, press the SELECT
button, and input the local time of numbers, press the SELECT button again.
Note:
If you want to cancel, press the RETURN button.
OM
PR OG
RE PE
RE C/
3. With Date (mm/dd/yy) highlighted, press the SELECT
button, and input the local date by numbers, press the
SELECT button again.
26
1 4/2 9/5 2
VO
TLE
PR EV
Time(hh:mm:ss)
P
+
W
TIT LE
AU DIO
Date(mm/dd/yy)
SE TU
A SE
SE LE
ER
SYSTEM SETUP - CLOCK
ER
AD
D /C
2. Use RIGHT/LEFT to highlight the CLOCK icon as the
right figure.
OM
FINALIZE
ZO
ReW
D+
rit
abl
e
L
Point the remote controller toward the remote
sensor on your DVD home theater center. Upon
receipt of the signal from the remote controller, the
equipment will operate accordingly.
The description in this Manual is based on the
buttons on the equipment. You may use the
counterparts on the remote controller to do the same.
Notes:
Do not place this equipment in a place exposed
to direct sunlight or strong light source like inverting
fluorescent light, or else it may interfere with correct
operation of the remote controller.
When other similar remote controller is used in
the same room, or when this product is used near
other equipment using infrared ray, interference with
the operation of this remote controller may occur.
Do not place any object on the remote controller,
or else it may cause unintentional depression of the
buttons and waste the batteries unnecessarily.
The front of the chassis should not be glazed
with color glass, or else it may cause interference
with normal operation of the remote controller.
Any barrier between the remote controller and
remote sensor will inactivate any operation of the
remote controller.
The operating range between the remote
controller and the equipment shall be no more than
5 meters (16 inches). When the operating range
becomes shorter, replace the batteries with new
ones.
7
Recording Options
Connection
CONNECTION FOR AUDIO OUTPUT
CHANNEL SEARCH
To record TV programs, you should search TV channels first.
Dolby Analog Prologic Surround Sound (GOOD)
Enjoy Dolby Pro Logic Surround by RCA CABEL connecting(FL, FR, SR, SR, C, SW) to an amplifier
and speaker system (right and left front speakers, a center speaker, and one subwoofer speaker,
and two rear speakers).
VIDEO
VIDEO OUTPUT
AUDIO OUTPUT
INPUT
IN
L
C
R
SW
SL
L
VIDEO
Cb/Pb
Y
SR
R
S-VIDEO
Cr/Pr
COAXIAL
DIGITAL
OUTPUT
OUT
TV75
ANTENNA
S-VIDEO
5.1CH
OPTICAL
SCART INPUT
1. Press the SCAN button to access the CHANNEL
SCAN menu.
2. Use the UP/DOWN button to highlight SCAN
and press the SELECT button.
It will search channels automatically.
During auto-searching, press the STOP button to
cancel searching.
SYSTEM SETUP - CHANNEL SCAN
3. To browse the found channels, use the UP/
DOWN button to highlight EDIT and press the
SELECT button to setup it, press the UP/DOWN
button to name, and you can also input numbers,
then press the SELECT button to confirm it.
In the SKIP column, The channel cannot be found
will be YES .
5.use the UP/DOWN button to highlight the OK and
press the SELECT button.
Enjoy the dynamic sound of Digital Prologic Surround by connecting (COAXIAL or OPTICAL) to an
amplifier equipped with a digital audio input and speaker system (right and left front speakers, a
center speaker, and one subwoofer speaker, and two rear speakers)
SCAN
Modify channel information
EDIT
Sort channel order
SORT
Select default TV system
CHANNEL EDIT
4. If you want to skip one channel, select the
corresponding channel. use the UP/DOWN button
to highlight the skip and press the SELECT button,
press the UP/DOWN button to highlight the yes, and
press the SELECT button.
Enjoying Prologic Surround Sound (BETTER)
PAL B/G
Scan channels
1
SCART OUTPUT
AMPLIFIER
Default TV system
6. If you want to sort the programs channel of order,
you can press the UP/DOWN button to highlight the
" sort channel order" icon, then press the SELECT
button, select the channel by pressing the UP/DOWN
button, in the CHANNEL SORT MENU. If you want to
sort which channel (such as"P002"), press the SELECT
or Right button, " P002 Ch009 Unshkip" will skip to
right column, press the UP/DOWN button to skip to you
want location, press the SELECT button.
Name
P001/S-008
Frequency
55.25MHz
TV System
PAL I
Skip
NO
Fine tune
OK
UP/DOWN to change Item, SELECT to edit,
0~9 or CH+/CH- to change Channel
CHANNEL SORT
P001
P002
P003
P004
P005
P006
P007
P008
P009
Ch008
Ch009
Ch020
Ch025
Ch031
Ch040
Ch046
Ch059
Ch061
Unskip
Unskip
Unskip
Unskip
Unskip
Unskip
Unskip
Unskip
Unskip
7. Press the RETURN button to retrun main MENU.
VIDEO
VIDEO OUTPUT
AUDIO OUTPUT
INPUT
IN
L
C
SL
L
R
SW
SR
R
VIDEO
Cb/Pb
Y
DIGITAL
OUTPUT
8. Press the SETUP button again to exit.
OUT
TV75
ANTENNA
S-VIDEO
5.1CH
S-VIDEO
Cr/Pr
COAXIAL
Audio cable
AMPLIFIER
OPTICAL
or
SCART INPUT
SCART OUTPUT
SETUP RECORD QUALITY
1. Press the SETUP button during stop status.
2. Press the direction keys (UP/DOWN/RIGHT/LEFT) to select.
3. Select default quality.
HQ: Perfect quality, nearly 60 minutes in a blank disc
SP: Standard play quality, nearly 120 minutes in a blank disc
EP: Extend play, nearly 240 minutes in a blank disc
SLP: Standard long play, nearly 360 minutes in a blank disc
8
25
Connection
Customizing Function Settings
THIS PLAYER ALLOWS YOU TO CUSTOMIZE THE PERFORMANCE TO YOUR PERSONAL
PREFERENCES.
CONNECTION FOR VIDEO OUTPUT
GOOD
SETUP MENU
BETTER
PLAYBACK
RECORD
LANGUAGE
CHANNEL SCAN
VIDEO
VIDEO OUTPUT
AUDIO OUTPUT
INPUT
IN
GENERAL
DIGITAL
OUTPUT
L
C
SL
L
VIDEO
Cb/Pb
Y
R
SW
SR
R
S-VIDEO
Cr/Pr
COAXIAL
VIDEO
VIDEO OUTPUT
AUDIO OUTPUT
INPUT
IN
L
C
R
SW
SL
L
VIDEO
Cb/Pb
Y
SR
R
S-VIDEO
Cr/Pr
COAXIAL
DIGITAL
OUTPUT
CLOCK
OUT
OUT
TV75
ANTENNA
DISPLAYING THE SETUP MENU SCREEN
S-VIDEO
5.1CH
The SETUP MENU screen asks you to select a setting category from General, Speaker, Audio and
Preferences. The selected category will provide you the setting details using the succeeding screen.
TV75
ANTENNA
OPTICAL
S-VIDEO
5.1CH
COMPOSITE
VIDEO
OPTICAL
S-VIDEO
Main Page
General Setup
On/Off
GENERAL
PLAYBACK
Progressive/Interlace
Interlace/Progressive
Video out
COUNTRY
YUV/RGB/CVBS
United kingd/Germany/France/Ireland
Video output format
PAL/NTSC
Restore factory settings
OK
Playback Setup
16:9/Pan Scan/Letter box
TV aspect ratio
Off
Rating level
Digital audio output
RAW/LPCM
Analog audio output
2CH/5.1CH
Connect your recorder with the S-Video cable,
if the TV has an S-Video input. Do not connect the
yellow video cable of using the S-Video cable.
SCART RGB VIDEO OUTPUT (BEST)
RGB VIDEO OUTPUT(BEST)
The SCART Video OUTPUT allows you to enjoy
the best picture quality from a DVD video disc.
The RGB VIDEO output allows you to enjoy the
best picture quality from a DVD video disc.
(NOTE: If use SCART VIDEO output, This RGB
VIDEO output may been not use.)
S-VIDEO
L
C
R
SW
DIGITAL
OUTPUT
SL
L
VIDEO
Cb/Pb
Y
SR
R
S-VIDEO
Cr/Pr
COAXIAL
5.1CH
SCART INPUT
OPTICAL
SCART OUTPUT
Record Setup
On/Off
Auto Chapter Marker
S-VIDEO
L
C
R
SW
SL
L
VIDEO
Cb/Pb
Y
SR
R
S-VIDEO
Cr/Pr
COAXIAL
5.1CH
SLP/EP/SP/HQ
Default quality
VIDEO OUTPUT
AUDIO OUTPUT
INPUT
VIDEO
Cb/Pb
Cr/Pr
RECORD
VIDEO OUTPUT
AUDIO OUTPUT
INPUT
VIDEO
DIGITAL
OUTPUT
OPTICAL
SCART INPUT
SCART OUTPUT
Y
Screen Saver
Language Setup
LANGUAGE
OSD language
English/Spanish/......
Menu language
English/Chinese/....../Original
Off/English/Chinese/......./Original
English/Chinese/......./Original
Subtitle language
Audio language
CONNECTION FOR TV TUNER
Channel Scan Setup
CHANNEL
SCAN
Default TV System
PAL1, D/K, B/G, SECAM D/K, L
Scan Channels
SCAN
Modify channel information
EDIT
YOUR RECORDER
Signal Input
Sort channel order
SORT
Date& Time Setup
CLOCK
Date(mm/dd/yy)
Time(hh:mm:ss)
01/01/00
01:15:01
IN
VIDEO
VIDEO OUTPUT
AUDIO OUTPUT
INPUT
L
C
R
SW
SL
L
VIDEO
Cb/Pb
Y
SR
R
S-VIDEO
Cr/Pr
COAXIAL
DIGITAL
OUTPUT
OUT
TV75
ANTENNA
S-VIDEO
5.1CH
OPTICAL
SCART INPUT
SCART OUTPUT
TV Signal output
1. Press the SETUP button during stop status.
2. Press the direction keys (UP/DOWN/RIGHT/LEFT) to select category (highlight), then press the
SELECT button.
3. Press the SETUP button to exit the setup menu.
24
TV ANTENNEL INPUT
NOTE
Refer to the manual of the connected TV.
Turn off the power and unplug both units before setting up any connections.
9
Setting the Parental Lock
Connection
THE RECORDER ALLOWS YOU TO ENJOY OR RECORD PROGRAMS WITH SIGNAL FROM AV
SYSTEMS SUCH AS VCR, DVD PLAYER, ETC.
YOU CAN USE THE PARENTAL LOCK FUNCTION ONLY WITH DVD EQUIPPED WITH THE
PARENTAL LOCK FEATURE
OPEN/CLOSE
STANDBY/ON
PS/IS
CONNECTION FOR AV SIGNAL (A/V REAR INPUT)
SETTING THE PARENTAL LOCK
SL
L
VIDEO
Cb/Pb
Y
DIGITAL
OUTPUT
3
7
8
DISPLAY
GOTO
9
0
ADD
/C LE
AR
N AV
IG AT
MENU
IO N
ZE
ZOOM
4
A LI
F IN
TY
SELECT
A LI
DIRECTION
or SELECT
ER
C
2
6
TI M
L
1
5
QU
IT
VIDEO
VIDEO OUTPUT
AUDIO OUTPUT
INPUT
IN
MUTE
ED
YOUR RECORDER
DVD equipped with the Parental Lock function are rated according to
their content. The contents allowed by the Parental Lock level will vary
from disc to disc. For example, if the disc allows it, you could edit out
violent scenes unsuitable for children and replace them with more
suitable scenes, or lock out playback of the disc all together.
SCAN
D IS
SETUP
AUDIO
CO
ERA
PER
SE
SETUP
ANGLE
SUBTITLE
TITLE
SLOW
REPEAT
PROG
RANDOM
RETURN
+
P
PREV
REV
NEXT
DV
TV
PLAY
VOL
P
SOURCE
FWD
OUT
REC/OTR
TV75
ANTENNA
S-VIDEO
R
SW
SR
5.1CH
R
S-VIDEO
Cr/Pr
COAXIAL
OPTICAL
SCART INPUT
Audio in
DVD + ReWritable
SCART cable
or
1. Press the STOP button twice during
playback.
2. Press the SETUP button during stop status.
DVD player
PAUSE/STEP CHANNEL
/
Video out
Video in
STOP
SCART OUTPUT
TV set
3. Highlight the PLAY icon by pressing
the RIGHT/LEFT button.
The menu appears on the TV screen.
6. Press SELECT , the sub-menu of Set Rating
Level appears, use the UP/DOWN button to
select one rating, press the SELECT button to
confirm it.
SYSTEM SETUP - PLAYBACK
OFF
OK
NEW
1 Kid Sate
2G
3 PG
4 PG 13
5 PG-R
6R
7 NC-17
8 Adult
OFF
SYSTEM SETUP - PLAYBACK
Connect your recorder with the S-Video cable, if the Signal
Source has an S-Video input. Do not connect the yellow
video cable if using the S-Video cable.
TV aspect ratio
Pan Scan
Rating level
OFF
Digital audio output
RAW
Closed captions
OFF
7. Highlight OK and press the SELECT button
to save your setting.
8. Press the SETUP button to exit setup,
press the PLAY button to start
1
TO CHANGE YOUR PASSWORD:
NOTE
Refer to the manual of the connected system.
Turn off the power and unplug both units before setting up any connections.
4. Use the UP/DOWN button to select Rating
Level, press the SELECT button.
5. Input your password of numbers, highlight
OK and press the SELECT button.
The pre-set password is 3308
1. Follow step 1-6 to select New .
2. Enter new password, then press the DOWN
button.
3. Re-enter to confirm your new password.
5. Highlight OK by pressing the RIGHT button
and press the SELECT button to save it.
6. Press the SETUP button to exit.
New password
New password
OK
Confirm password
Cancel
10
23
Connection
Using the On-Screen Display
THIS RECORDER ALLOWS YOU TO VIEW STATUS AND DISC INFORMATION ON YOUR TV SCREEN.
CONNECTION FOR DV SIGNAL (DV FRONT INPUT)
CHECKING THE OPERATIONAL STATUS
RECORDER REAR
With this function, you can view on your TV the following informations:
-Play back status
- Current title
- Current chapter
-Current language
-Current title Time
Press the DISPLAY button once during DVD playback.
C
R
SW
SL
L
VIDEO
Cb/Pb
Y
SR
R
S-VIDEO
Cr/Pr
COAXIAL
DIGITAL
OUTPUT
PS/IS
SCAN
5.1CH
SCART INPUT
OPTICAL
SCART OUTPUT
MUTE
1
2
3
5
6
7
8
DISPLAY
GOTO
4
ADD
/C LE
FL
DISPLAY
0
AR
N AV
IG A
FR
Video out
MENU
TI O N
E
ZOOM
S-VIDEO
STANDBY/ON
9
PLAY BACK STATUS
L
OUT
TV75
ANTENNA
OPEN/CLOSE
Normal Play T01/25 C06/21 AU01/03 00:26:48
VIDEO
VIDEO OUTPUT
AUDIO OUTPUT
INPUT
IN
T IM
A L IZ
Normal Play T01/25 C06/21 AU01/03 00:26:48
F IN
ER
SELECT
IT
QU
ED
A L IT
Y
CURRENT TITLE/TOTAL TITLE
D IS
AUDIO
Normal Play T01/25 C06/21 AU01/03 00:26:48
CO
ERA
PER
SE
SETUP
ANGLE
SUBTITLE
TITLE
SLOW
REPEAT
PROG
RANDOM
RETURN
PREV
NEXT
DV
TV set
+
P
CURRENT CHAPTER/TOTAL CHAPTER
RECORDER FRONT
VOL
P
TV
SOURCE
DVR-625
REV
PLAY
FWD
Normal Play T01/25 C06/21 AU01/03 00:26:48
USB
DV INPUT
STANDBY/ON
REC/OTR
OPEN/CLOSE
RECORD
PAUSE/STEP CHANNEL
STOP
/
CURRENT LANGUAGE
Normal Play T01/25 C06/21 AU01/03 00:26:48
DVD + ReWritable
CURRENT TITLE TIME
DIGITAL
Vidicon
Using the volume or mute function
OPEN/CLOSE
STANDBY/ON
PS/IS
2
5
6
9
CONNECTION FOR USB PORT
4
7
8
DISPLAY
GOTO
0
AD D/
CL EA
R
NAVIG
AT IO
RECORDER FRONT
MENU
N
AL IZ
E
ZOOM
MUTE
3
TIM
ER
FI N
This recorder allows you adjust the sound level, or mute the sound.
SCAN
1
SELECT
LI TY
DVR-625
IT
Q UA
ED
How to adjust the sound level
Press the VOL+ or VOL- button to increase or decrease the sound
output level, MAX 20 step to adjust.
DI SC
AUDIO
O PE
ER AS
R
E
USB
SETUP
ANGLE
SUBTITLE
TITLE
SLOW
REPEAT
PROG
RANDOM
RETURN
DV INPUT
STANDBY/ON
OPEN/CLOSE
RECORD
+
P
PREV
REV
REC/OTR
NEXT
DV
PLAY
STOP
VOL
P
TV
VOLUME+/-
SOURCE
FWD
PAUSE/STEP CHANNEL
/
How to mute the sound
Press the mute button to mute the sound.
Press it again to cancel muting.
DVD + ReWritable
The thick side is downward
How to zoom in screen of picture
22
This recorder can zoom in the picture when play DVD DISC
1. Press the ZOOM button once when play a DVD DISC, the screen of picture will zoom in 150%,
press twice, zoom in200%, press thrice, return to normal picture.
2. You can move the picture location by pressing the UP/DOWN/LEFT/RIGHT button when the
picture is zoomed in.
NOTE
Refer to the manual of the connected system.
Turn off the power and unplug both units before setting up any connections.
11
Selecting Subtitles
Play Back a Disc
THIS RECORDER ALLOWS YOU TO DISPLAY THE SUBTITLES FROM THOSE INCLUDED ON THE
DISC ON YOUR TV SCREEN.
PLAYING A NORMAL DVD DISC
1.Power on your recorder.
OPEN/CLOSE
STANDBY/ON
OPEN/CLOSE
PS/IS
2.Insert a DVD disc.
3.Press direction Keys or the number buttons to select
the title.
MUTE
1
2
3
5
6
7
8
DISPLAY
GOTO
9
0
ADD
/C LE
AR
N AV
IG AT
Bonsoir
Buenas tardes
MENU
HOW TO DISPLAY SUBTITLES
F IN
ER
A LI
Title 2
Good afternoon
IO N
ZE
ZOOM
4
TI M
Title1
SCAN
SELECT
IT
QU
ED
A LI
TY
SELECT
D IS
AUDIO
ANGLE
CO
ERA
P ER
SUBTITLE
Press the SUBTITLE button during playback to choose
one of the subtitles available on the disc, or turn the
subtitle off.
SE
SETUP
SLOW
TITLE
+
REPEAT
PROG
RANDOM
PREV
NEXT
DV
P
Title3
Title 4
PLAY
REV
VOL
RETURN
P
TV
PLAY
SOURCE
OPEN/CLOSE
SUBTITLE :01/07 ENG
FWD
1
2
6
9
PAUSE/STEP CHANNEL
3
4
7
8
DISPLAY
GOTO
0
AD D
/C LE
NAVI
AR
G AT
MENU
IO N
TI M
ZE
SUBTITLE :02/07 GER
ER
FI N
/
MUTE
A LI
STOP
SCAN
5
ZOOM
REC/OTR
STANDBY/ON
PS/IS
SELECT
IT
QU
ED
A LI
TY
SUBTITLE :03/07 SPA
D IS
4 Press the SELECT or PLAY button.
The DVD video player will start playback from the title
selected.
DVD + ReWritable
AUDIO
SUBTITLE
SUBTITLE :04/07 FRE
CO
ER A
PE R
TITLE
SLOW
REPEAT
PROG
RANDOM
RETURN
+
PREV
NEXT
REV
5. To remove the disc, first press the STOP button twice, press the OPEN/CLOSE button.
REC/OTR
DV
STOP
PAUSE/STEP CHANNEL
DVD + ReWritable
OFF
PLAYING A DVD+RW OR DVD+R DISC
OPEN
CLOSE
OPEN/CLOSE
STANDBY/ON
PS/IS
2.Press the OPEN/CLOSE button
This will open the disc tray and allow for the placement of a
playable disc with the playback side down.
SCAN
STANDBY
/ON
MUTE
1
2
3
4
5
6
7
8
DISPLAY
GOTO
9
0
ADD
/C LE
AR
N AV
IG A
TI O N
Note:
Due to the nature of some DVD s, you may not be able to turn off the subtitles as they will appear on
screen automatically.
As you press the SUBTITLE button, the subtitles may not appear immediately during some scenes.
If the subtitles continue to show on your TV even after the DVD has been turned off, please check the closed
caption settings on your TV.
MENU
T IM
A L IZ
E
ZOOM
F IN
ER
SELECT
IT
QU
ED
A L IT
Y
SELECT
4.Use direction keys(UP/DOWN/RIGHT/LEFT) to highlight
the title for you desired.
D IS
AUDIO
CO
ERA
PER
5.Press the SELECT or PLAY button to start playback of
the title for you selected.
SUBTITLE
TITLE
SLOW
REPEAT
PROG
RANDOM
RETURN
PREV
NEXT
DV
P
PLAY
P
TV
STOP
STOP
SOURCE
FWD
PAUSE/STEP CHANNEL
/
DVD + ReWritable
This recorder support USB1.1 interface & IEEE1394 standard.
VOL
PLAY
REC/OTR
Play by U-DISC & Digital Vidicon
SETUP
ANGLE
REV
UP/DOWN
/RIGHT/LEFT
SE
+
Note:
After finishing playback all titles contained on a
DVD+RW or DVD+R disc, it will return to the Index Picture
Screen.
SOURCE
FWD
/
SUBTITLE :07/07 HIN
6.Stop playback
Press the STOP button once to pre-stop the player, press the
PLAY button to resume playing from the stopping of point.
Press the STOP button twice to STOP.
VOL
P
TV
PLAY
SUBTITLE :06/07 HUN
3. Press the OPEN/CLOSE button again
The index pictures will appear on the screen.
SETUP
SUBTITLE
P
SUBTITLE :05/07 CHI
1.Power on your recorder.(Press the STANDBY/ON button)
SE
ANGLE
HOW TO PLAY THE U-DISC
1.Connect the U-DISC to USB port
(Refer: connection for USB port)
2. Press the”DV” button twice.
3. The recorder will read the files from U-DISC,
and auto play the first file.(This recorder can
support the files, (such as:*.MP3,*.WMA,*.JPG)
4. Select the other file by pressing the UP/DOWN
button, then press the SELECT button to play.
5. Press the STOP button, then pull out the U-DISC.
FILE PLAY-PLAY 0:00:27-0:05:27
FILES & DIRECTORY
FAVORITE/OROGRAM
MUSIC1.MP3
1.JPG
2.JPG
3.JPG
MUSIC5WMA
MUSIC4WMA
How to play the digital vidicon
12
1. Connect the Digital vidicon to DV port(Refer"CONNECT for DV signal(DV front input)")
2. Turn on the DV of power.
3. Press the"DV"button once.
4.The recorder will read the files from DV set, and control the DV by the recorder of remoter, such
as the PLAY, Forward, REV, PREV, NEXT, STOP, PAUSE/STEP functions.
5. Press the STOP buttons, then turn off the DV of power.
6. Pull out the DV cable.
21
Playing in a Favorite Order
Play Back a Disc
THIS RECORDER ALLOWS YOU TO PROGRAM UP TO 99 ITEMS INTO MEMORY AND THEN PLAY
BACK IN THIS ORDER. (PROGRAM/PLAYBACK)
PLAYING A DVD+RW OR DVD+R DISC
Index Picture Screen
HOW TO SET TITLES, CHAPTERS, OR TRACKS IN A FAVORITE ORDER
1. Press the DISPLAY button twice to access the control bar, or directly press the PROG button
to display the edit program play list.
2. Highlight
button.
MODE
Normal
1. TITLE
01/01/00
12:03:47
SP00:00:20
by pressing the RIGHT/LEFT button, press the SELECT
3. Use the UP/DOWN button to select PROGRAM and press the SELECT button, two columns
will appear on screen.
The left column displays all titles on the disc.
OPEN/CLOSE
STANDBY/ON
PS/IS
Edit program play list
3
7
8
DISPLAY
GOTO
9
0
ZOOM
ADD/CLEAR
ADD
/C LE
AR
4
NAVI
G AT
A LI
TY
SELECT
IT
QU
ED
DIRECTION
or SELECT
TITLE 04
D IS
AUDIO
TITLE 05
TITLE 06
1. TITLE
01/01/00
12:08:57
SLP00:00:20
MENU
IO N
ER
TITLE 03
2
6
ZE
TITLE 02 Chapter 01
TITLE 04 Chapter 01
1
5
TI M
TITLE 02
DISPLAY
MUTE
A LI
TITLE 01
Favorite/Program
SCAN
FI N
TITLE
1. TITLE
01/01/00
12:06:50
HQ00:00:20
CO
ER A
PE R
SE
SETUP
ANGLE
SUBTITLE
TITLE
SLOW
REPEAT
PROG
RANDOM
RETURN
+
PROGRAM
P
PREV
NEXT
DV
VOL
P
TV
SOURCE
Description:
TITLE 07
REV
PLAY
FWD
TITLE 08
REC/OTR
STOP
PAUSE/STEP CHANNEL
/
The right column allows you to edit titles in your favorite order.
DVD + ReWritable
2. In the left column, use the UP/DOWN button to select one title, and
press the ADD/CLEAR button to add it to the right column.
You can also select one chapter by pressing the SELECT button after highlighting
the title.
3. To clear one title you have added in the right column, highlight
the one in the right volume and then press the ADD/CLEAR button to clear it.
Use the RIGHT/LEFT button to move the cursor between the column.
1.
2.
3.
4.
5.
1. TITLE
01/01/00
12:03:47
SP 00:00:20
1.The name of the pre-recorded. The default is TITLE.
2.The date and time of the record.
3.Title time of the record.
4.The quality.
5.The time 0f length for the record
NAVIGAATION FONCTION
4. Press the PLAY button to return the program play back.
5.Press the DISPLAY button twice to access the control bar
Select
MODE Program use UP/DOWN to select NORMAL and press
the SELECT button to resume normal playback.
Note:
On the MP3/CD disc, there are some differences on OSD.
20
All playback operation can be realized by the navigation. During playback, press the DISPLAY
button twice or the NAVIGATION button once access the control MENU:
NAVIGATION
DVD
MODE
TRACK
TITLE
CHAPTER
AUDIO
SUBTITLE
ANGLE
T-TIME
Normal
Play
35/41
01/01
01/02-OTH
Off
01/01
00:00:00-00:00:00
Mode select
To go to monitor mode where you can
start record work
13
Play Back a Disc
Selecting Camera Angles, Languages & Audio Settings
The details of every functions is as follows:
Press the RIGHT/LEFT button to highlight one icon and press the SELECT button to enter , after
pressing the UP/DOWN button to select item, press the SELECT button to confirm it.
Press the DISPLAY button again to cancel the control bar.
THIS RECORDER ALLOWS YOU TO SELECT FROM SEVERAL DIFFERENT ANGLES AND
LANGUAGES.
AUDIO :01/03 GER DOLBY
ANGLE1
ANGLE2
AUDIO :02/03 ENG DOLBY
OPEN/CLOSE
STANDBY/ON
AUDIO :03/03 CHI DOLBY
PS/IS SCAN MUTE
AUDIO
0
8
ZOOM
D /C
LEA
R
N AV
IG AT
GOTO
MENU
IO N
AL
IT Y
SELECT
QU
D IS
AUDIO
CO
PE
ER
R
ANGLE SUBTITLE TITLE
AS
E
SETUP
SLOW
+
VOL
REPEAT PROG RANDOM RETURN
T-TIME
Chapter Select an available chapter by
inputting numbers.
HOW TO CHANGE THE CAMERA ANGLE
ANGLE
01/01
Angle Select your desired camera angle, if
available.
CHAPTER 01/01
9
4
DISPLAY
If the DVD disc was recorded with multiple camera angles information , you
have the option to change the camera angle of the scene which you are
watching.
AUDIO
Subtitle Select an available Subtitle by
inputting numbers.
ANGLE
Title Select an available title by inputting
numbers.
7
IT
35/41
3
ED
TITLE
2
6
AD
SUBTITLE Off
Playback control Control playback by various
setting such as FAST FORWARD, FAST
REVERSE, PAUSE, STOP, etc.
1
5
ER
Play
Audio Select your desired Audio setting, if
available.
Selecting a language
T IM
TRACK
Selecting the camera angle
IZ E
Playback Mode Set your appreciated playback
mode such as PROGRAM, RANDOM and
various repeat mode.
01/02-OTH
AL
Normal
F IN
MODE
Press the ANGLE button while playing back a scene recorded with
multiple angles.
ANGLE :01/03
You may only press the ANGLE button when the angle icon
P
PREV
NEXT
REV
REC/OTR
DV
PLAY
STOP
TV
P
SOURCE
FWD
PAUSE/STEPCHANNEL
/
is shown on the monitor.
00:00:00-00:00:00
Timer Goto the point you want to start from
by inputting the time.
Each time you press the ANGLE button, the angle will be changed.
DVD + ReWritable
ANGLE :01/03
ANGLE :02/03
ANGLE :03/03
GENERAL FEATURES
NORMAL PLAY
Note:
The above features vary depending on the disc type such as MP3,
Audio CD, etc.
14
SCAN
MUTE
2
3
5
6
7
8
DISPLAY
GOTO
9
4
The angle function will not work on the DVD video discs that do not contain multiple angles information.
During still playback, you are able to change the camera angle. When you resume to normal playback, the camera angle
will change to the new setting.
The angle icon indicator will illuminate while playing back a title that contains at least one scene recorded from multiple angles.
0
ZOOM
AR
N AV
IG A
TI O N
MENU
HOW TO SELECT A LANGUAGE & PLAYBACK AUDIO SETTING
A L IZ
E
AD
LE
D /C
F IN
ER
1/8
PS/IS
1
T IM
1/4
STANDBY/ON
A L IT
Y
SELECT
D IS
AUDIO
ANGLE
This RECORDER allows you to select a preferred language and sound recording system from the
DVD video disc.
QU
IT
1/2
Note:
OPEN/CLOSE
ED
1.Fast forward playback
Repeadedly press the FWD( )button during normal playback.
The speed will be changed cycle.
FF2 Ff4 Ff14 FF32
Press the PLAY button to resume normal playback.
NORMAL PLAY
2.Fast reverse playback
Repeadedly press the REV( ) button during normal playback.
FB2 FB4 FB14 Fb32
The speed will be changed cycle.
Press the PLAY button to resume normal playback.
NORMAL PLAY
ZOOM
3.Pause playback
Press the PAUSE/STEP button during normal playback to pause
and press the PLAY button to resume normal playback.
4.Frame advance
Press the PAUSE/STEP button twice during normal playback.
PRVERSE/
One frame is advanced when pressing the PAUSE/STEP button.
FORWARD
Press the PLAY button to resume normal playback.
PLAY
5.Slow
PAUSE
Press the SLOW button during playback
/STEP
The playback speed becomes 1/2, 1/4, 1/8 of the normal speed.
CO
ERA
PER
SUBTITLE
SE
SETUP
SLOW
TITLE
+
REPEAT
PROG
RANDOM
RETURN
P
PREV
REV
REC/OTR
NEXT
DV
PLAY
STOP
VOL
P
TV
SOURCE
FWD
1. Press the AUDIO button during playback
2. Press the AUDIO button repeatedly to
cycle through the options
AUDIO :01/03 GER DOLBY
AUDIO :02/03 ENG DOLBY
AUDIO :03/03 CHI DOLBY
PAUSE/STEP CHANNEL
/
DVD + ReWritable
Note:
The RECORDER returns to the initial default settings when you turn on the RECORDER or replace
a disc.
The RECORDER plays a default sound when unsupported format is selected.
On the MP3/CD disc, the AUDIO is used for the selection of left, right and stereo.
19
Playing in Random Order
Locating a Specific Title, Chapter or Track
THIS RECORDER ALLOWS YOU TO PLAYBACK TITLES, CHAPTERS WITHIN A TITLE, OR TRACKS
IN RANDOM ORDER.
DVD VIDEO DISCS ARE NORMALLY DIVIDED INTO TITLES AND SUB-DIVIDED INTO CHAPTERS.
SIMILARLY, CD'S(AUDIO,HDCD, and MP3) ARE DIVIDED INTO TRACKS. YOU CAN CONVENIENTLY
LOCATE ANY SPECIFIC TITLE, CHAPTER, OR TRACK WITH THIS DVD PLAYER.
Chapter1
Chapter2
Chapter1
Chapter2
Chapter3
Track1
Track2
Track3
Track4
Track5
PLAYING TITLES IN RANDOM ORDER
TITLE1
1. During normal playback press the RANDOM button.
The player will start random playback now.
Audio CD
TITLE2
DVD Video Disc
OPEN/CLOSE
STANDBY/ON
PS/IS
Random
1
2
5
6
9
0
ZOOM
ADD
/C LE
MUTE
3
4
7
8
DISPLAY
GOTO
LOCATING A TITLE USING THE TITLE MENU
You can locate a specific title using the title menu function, if a DVD video disc contains a title menu.
AR
N AV
IG AT
MENU
IO N
TI M
A L IZ
E
Normal
SCAN
F IN
ER
1.Press the TITLE button
On the TV screen, the title menu will appear.
IT
QU
ED
A LI
TY
SELECT
D IS
AUDIO
ANGLE
CO
ERA
PER
SUBTITLE
SE
SETUP
REPEAT
PROG
RANDOM
PREV
NEXT
DV
RETURN
P
RANDOM
REV
PLAY
REC/OTR
STOP
Title 1
Title 2
Title 3
Title 4
SELECT
SLOW
TITLE
+
2. Press the RANDOM button again to resume normal playback.
2.Press the / / / button to select the title that you want to
VOL
P
TV
SOURCE
FWD
3.Press the SELECT button
This will cause the DVD video player to start playback from
chapter 1of the title selected.
PAUSE/STEP CHANNEL
TITLE
Example of a title menu
/
DVD + ReWritable
NOTICE
There are some discs that do not respond to this function.
If different instructions appear on the TV screen, follow those instructions. The instructions
above are describe as basic procedure. Procedure may depend on the contents of
the disc.
LOCATING A SPECIFIC CHAPTER OR TRACK
This player allows you to locate consecutive chapters or tracks.
Note:
• The RECORDER will go to another chapter or track and start playback, if you press the SKIP button(
playback.
,
), during random
Repeatedly Press the SKIP or
button to display the requested chapter or track
The player starts playback from the selected chapter or track.
PREV NEXT
How to locate proceeding chapters or tracks
When you press the SKIP
button , the player starts playback from the beginning of the
preceeding chapter or track.
How to locate succeeding chapters or tracks
When you press the SKIP button , the player starts playback from the beginning of the
succeeding chapter or track..
Notice: on some discs the titles may not display the sub-divided chapters.
18
15
Playing Repeatedly
Locating a Specific Title, Chapter or Track
THIS RECORDER ALL ALLOWS YOU TO PLAYBACK A SPECIFIC TITLE, CHAPTER, TRACK, OR
SEGMENT REPEATEDLY.(TITLE REPEAT, CHAPTER/TRACK REPEAT, A-B REPEAT)
LOCATING A TITLE
If a DVD video disc contains title numbers, you can locate a specific title by directly selecting
a title number.
HOW TO REPEAT A TITLE, CHAPTER, OR TRACK
1.Press the GOTO button once during playback.
The control bar will display on the screen.
1.Press the REPEAT button during playback.
The repeat mode changes, each time you press the REPEAT
Button.
CHAPTER---
OPEN/CLOSE
SCAN
MUTE
1
2
3
5
6
7
8
DISPLAY
GOTO
9
0
ZOOM
AD D
/C LE
4
NAVI
AR
G AT
MENU
IO N
FI N
ER
A LI
TI M
ZE
Repeats the same chapter.
C-RPT
STANDBY/ON
PS/IS
A LI
IT
QU
ED
OPEN/CLOSE
TY
SELECT
2 To select your desired Chapter, input the number of available chapter, then press the
SELECT button to confirm it.
D IS
AUDIO
Repeats the same title.
T-RPT
e.g. To select Chapter2
5
6
9
4
7
8
DISPLAY
GOTO
REPEAT
PROG
RANDOM
RETURN
+
P
/C LE
NEXT
DV
VOL
P
REV
NUMBERS
Repeats the whole disc.
D-RPT
REC/OTR
PLAY
TV
SOURCE
STOP
FWD
PAUSE/STEP CHANNEL
/
GOTO
0
ADD
SETUP
SLOW
MUTE
3
AR
N AV
IG AT
MENU
IO N
A LI
ER
F IN
Resumes normal playback.
NORMAL
TI M
ZE
ZOOM
CHAPTER- -2
SCAN
2
SE
TITLE
PREV
PS/IS
ER A
PE R
SUBTITLE
REPEAT
STANDBY/ON
1
CO
ANGLE
DVD + ReWritable
SELECT
IT
QU
ED
A LI
TY
SELECT
D IS
AUDIO
CO
ERA
PE R
SE
SETUP
ANGLE
SUBTITLE
TITLE
SLOW
REPEAT
PROG
RANDOM
RETURN
+
P
PREV
REV
REC/OTR
NEXT
DV
PLAY
STOP
VOL
P
TV
SOURCE
HOW TO REPEAT A SPECIFIC SEGMENT
FWD
PAUSE/STEP CHANNEL
1.Press the DISPLAY button twice to access the control bar.
/
DVD + ReWritable
2.Highlight MODE Normal
SELECT button.
by pressing the RIGHT/LEFT button, then press the
3.Use the UP/DOWN button to select A-B Repeat and press the SELECT button at the
beginning of the segment in which you want to repeat playback(point A).
3
To select your desired title, press the GOTO button twice to highlight the icon
and input the number of available title, then press the SELECT button.
TITLE:--
4.If you want to start playback from some time of point, press the GOTO button three
times to highlight the icon
,and input the available time, then press the
SELECT button.
Note:
The function is invalid on MP3 disc.
For CD disc, GOTO is used for track/time selection.
4.Press the SELECT button again at the end of the
segment( point B)
The recorder will automatically return to point A and
Start to repeat playback to the selected segment(A-B)
DVD
MODE
TRACK
TITLE
CHAPTER
AUDIO
SUBTITLE
ANGLE
T-TIME
Normal
Play
35/41
01/01
01/02-OTH
Off
01/01
00:00:00-00:00:00
Normal
A-B Repeat
Chapter Repeat
Title-Repeat
Disc Repeat
5.Highlight MODE A-B Repeat
by pressing the RIGHT/LEFT button, press the SELECT
button.
Use the UP/DOWN button to select the NORMAL button and press SELECT button to resume normal
playback.
Note:
There are two repeat modes for MP3/CD disc. On CD disc, they are track repeat
and disc repeat, and on MP3 disc, they are repeat song and repeat directory.
16
CD
MODE
TRACK
TRACK
AUDIO
PBC
TR-TIME
Normal
Play
01/01
Stereo
PBC on
00:01:50-01:25:40
Normal
A-B Repeat
Track-Repeat
Disc-Repeat
Program
Random
17