Download Ideal Office- & EDP-shredder 3802

Transcript
Office and EDPshredders
·················································································································
·················································································································
·················································································································
·················································································································
························································
IDEAL 3802
4 MM
16 – 20 SHEETS*
230 VOLTS / 50 HZ / 1~
Motor capacity
460 WATT
Feed opening
380 MM
Security level
2
Dimensions (H x W x D) 896 X 530 X 418 MM
Weight
47.0 KG
Cutting width
Performance
Power connection**
IDEAL 3802-Cross/Cut
2 X 15 MM
9 – 11 SHEETS*
230 VOLTS / 50 HZ / 1~
460 WATT
380 MM
4
896 X 530 X 418 MM
49.0 KG
4 X 40 MM
13 – 16 SHEETS*
230 VOLTS / 50 HZ / 1~
460 WATT
380 MM
3
896 X 530 X 418 MM
49.0 KG
IDEAL FOR THE OFFICE AND THE EDP DEPARTMENT:
· large 380 mm feed opening for continuous forms
· large volume container for the shredded material (135 litres)
· flap opening for non-confidential paper waste
· photo cell controlled automatic start and stop
· modern controls and optical indicators
· automatic cut-off if the shred bag is full
or in case of a paper jam
· automatic cut-off if the door is opened
· 460-Watt-motor for continuous operation
· double motor protection against overheating
· high-quality wooden cabinet with front door, mobile on castors
· bag frame for disposable shred bags
· paper clip proof cutting shafts from special hardened steel
· storage rack for EDP-printouts available at an extra cost
*paper A4, 70 g/m2
**all common voltages available
The technical data are approximate. Subject to change. 04/2005
Particle size
Performance
Power connection**
Motor capacity
Feed opening
Security level
Dimensions (H x W x D)
Weight