Transcript
Data sheet: CN-033 CN-033 Serial ATA PCi card 8716502005550 5/20 To be dated. To be dated. To be dated. 209 (W) x 145,5 (D) x 45 mm (H) Serial ATA is an advanced connectivity standard for hard-disks. The distinguishing features are: a higher data throughput speed, easy to install thanks to smaller cables and an improved cooling system. In order to take advantage of the benefits of this ATA standard, both your motherboard and your hard disk must have an ATA connector. If your motherboard is not fitted with this standard, then this Serial ATA PCI card is an ideal solution. By installing this PCI card in your PC, you have two Serial ATA connectors available to you in no time at all so that a reliable and fast data transfer to and from your hard disk is made possible. Serial ATA PCI card - 2 port 2 SATA cables 2 power cables Diskette with controller drivers CD with controller drivers and extra software Windows 98SE/2000/ME/XP Free PCI slot CD Rom drive Connect your Serial ATA hard disk to your PC and experience high-quality storage 2 serial ATA channels to support one serial ATA device on each channel. RAID 0 and RAID 1 supported. Compliant with serial ATA 1.0 specification at high transfer rate of 1.5Gb per second. Supports hard disk drives larger than 137GB. Support 32-bit PCI slot. Compliant with PCI Specification revision 2.3. Driver support for Win9X, Win ME, Win2000, and Win XP. Supports the Microsoft driver for the generic IDE operations and Intel bus master DMA operations P. 1-1.