Download Sitecom Network KVM Switch Kit - For 4 PC's w/Cables Sets
Transcript
Data sheet: KV-006 KV-006 KVM Switch kit 4 PC - PS/2 8716502002849 2/8 770 gr. 195 (W) x 82 (D) x 48 mm (H) 3,8 kg. 240,5 (W) x 240,5 (H) x 144 mm (D) 16 kg. 42 (W) x 26,4 (D) x 31cm (H) The KVM Switch Kit is ideal for controlling four PC’s in the same working environment. The KVM Switch Kit saves you a lot of space, because it enables you to operate two PC’s with one single monitor, keyboard and mouse. Thus you can control, for example, a printer server, a backup system and an internet server without leaving your workstation. The system gets switched on automatically when you start your PC, or you can activate it via a combination of keys on a keyboard, or you may activate it manually over the KVM Switch Kit. KVM Switch Kit 4 PC - PS/2 2 x 1.8 meters cableset for monitor, keyboard and mouse 2 x 3 meters cableset for monitor, keyboard and mouse User manual 4 IBM compatible PC’s Mouse with PS/2 connection Keyboard with PS/2 connection VGA monitor with 15 pin connector P. 1-2. Data sheet: KV-006 Use one keyboard, mouse and monitor to control 4 computers The kit is supplied complete with cable sets of 1.8 and 3 meters. Suitable for PS/2 keyboards Suitable for PS/2 mouse Caps-Lock, NUM-lock and other assigned values will be stored in the memory Supports all video modes up to 1920 x 1440 @ 200mHz - Signals you when it changes over Controls 4 Pc with one Keyboard, 1 monitor, 1mouse Complete with high quality cable sets(VGA, 2x PS/2)of 2x1.8 m and 2x3m with PC99 connector colour codes Maximim resolution 1920x1440 Operated via button on KVm switch or through a keyboard key combination Metal housing Provides 4 port KVM switch with compact size design, easily portable Supports Microsoft Intellimouse, Microsoft Intellimouse Pro, Logitech Net Mouse, and more Support hot-plug capability - Add or Remove connected PCs for maintenance without powering down the KVM switch or the PC Very High Video quality - Up to 1920x1440 with bandwidth of 200Mhz No Software Required - easy PC selection via push buttons Auto Scan Mode automatically selects monitors sequentially Keyboard states automatically saved and restored upon switching LED display for easy status monitoring Beep sound for switching port confirmation P. 2-2.