Download Kingston Technology HyperX 256MB DDR2 675MHz

Memory Module Specification
T E C H N O L O G Y
KHX5400D2/256
256MB 32M x 64-Bit PC2-5400
CL4 240-Pin DIMM
DESCRIPTION:
This document describes Kingston's 32M x 64-bit (256MB) DDR2-675 CL4 SDRAM (Synchronous
DRAM) memory module, based on four 32M x 16-bit DDR2 FBGA components. This module has
been tested to run at DDR2 675MHz at low latency timing of 4-4-4-10 at 1.85V. The SPD is
programmed to JEDEC standard latency timing of 4-4-4-12 at 1.8V. This 240-pin DIMM uses gold
contact fingers and requires +1.8V. The electrical and mechanical specifications are as follows:
FEATURES:
Power supply : Vdd: 1.8V ± 0.1V, Vddq: 1.8V ± 0.1V
Double-data-rate architecture; two data transfers per clock cycle
Bidirectional data strobe(DQS)
Differential clock inputs(CK and CK)
DLL aligns DQ and DQS transition with CK transition
Programmable Read latency 4 (clock)
Burst Length: 4, 8 (Interleave/nibble sequential)
Programmable Burst type (sequential & interleave)
Timing Reference: 4-4-4-10 at +1.85V
Edge aligned data output, center aligned data input
Auto & Self refresh, 7.8us refresh interval (8K/64ms refresh)
Serial presence detect with EEPROM
High Performance Heat Spreader
PCB : Height 1.180” (30.00mm), single sided component
PERFORMANCE:
Clock Cycle Time (tCK) CL=4
Row Cycle Time (tRC)
Refresh to Active/Refresh Command Time (tRFC)
Row Active Time (tRAS)
Single Power Supply of
Power
UL Rating
Operating Temperature
Storage Temperature
KE
Document No. 4804024-001.A00
YE
3.75ns (min.) / 8ns (max.)
60ns (min.)
105ns
45ns (min.) / 70,000ns (max.)
+1.8V (+/- .1V)
0.900 W (operating)
94 V - 0
0o C to 55o C
-55o C to +125o C
D
08/11/04
Page 1
Kingston Technology
MODULE DIMENSIONS:
Units : Millimeters
133.35
(2X)4.00
131.35
10.00
128.95
SPD
(2)
2.50
A
17.80
2.30
30.00
B
63.00
2.7
55.00
1.270 ± 0.10
4.00
4.00
3.00
2.50±0.20
5.00
0.80±0.05
3.80
2.50
1.50±0.10
Detail A
0.20
1.00
4.00
Detail B
For more information, go to www.kingston.com
All Kingston products are tested to meet our published specifications. Some motherboards or system configurations may not
operate at the published HyperX memory speeds and timing settings. Kingston does not recommend that any user attempt to
run their computers faster than the published speed. Overclocking or modifying your system timing may result in damage to
computer components.
Document No. 4804024-001.A00
Page 2