Transcript
Memory Module Specification KVR400D2N3/256 256MB 32M x 64-Bit DDR2-400 CL3 240-Pin DIMM DESCRIPTION: This document describes ValueRAM's 32M x 64-bit (256MB) DDR2-400 CL3 SDRAM (Synchronous DRAM) memory module. The components on this module include four 32M x 16-bit (8M x 16-bit x 4 Bank) DDR2-400 SDRAM in FBGA packages. This 240-pin DIMM uses gold contact fingers and requires +1.8V. The electrical and mechanical specifications are as follows: FEATURES: Clock Cycle Time (tCK) CL=3 Row Cycle Time (tRC) Refresh to Active/Refresh Command Time (tRFC) Row Active Time (tRAS) Single Power Supply of Power UL Rating 5ns (min.) / 8ns (max.) 55ns (min.) 75ns 40ns (min.) / 70,000ns (max.) +1.8V (+/- .1V) 0.828 W (operating) 94 V - 0 Note: The module defined in this data sheet is one of several configurations available under this part number. While all configurations are compatible, the DRAM combination and/or the module height may vary from what is described here. However, in no configuration will the module height exceed 1.250" (31.75mm). 133.35 Units : Millimeters (2X)4.00 131.35 10.00 128.95 SPD (2) 2.50 A 17.80 2.30 30.00 B 63.00 2.7 55.00 1.270 ± 0.10 4.00 2.50±0.20 5.00 4.00 3.00 0.80±0.05 3.80 2.50 1.50±0.10 Detail A 0.20 1.00 4.00 Detail B Figure 1: KVR400D2N3/256 240-Pin DIMM Document No. VALUERAM0361-001.A00 10/11/04