Transcript
Memory Module Specification KVR333X64SC25/1G 1GB 128M x 64-Bit DDR333 CL2.5 200-Pin SODIMM DESCRIPTION: This document describes ValueRAM's 128M x 64-bit (1GB) DDR333 CL2.5 SDRAM (Synchronous DRAM) memory module. The components on this module include sixteen 64M x 8-bit (16M x 8-bit x 4 Bank) DDR333 SDRAM sealed in TCP packages. This 200pin DIMM uses gold contact fingers and requires +2.5V. The electrical and mechanical specifications are as follows: FEATURES: Clock Cycle Time (tCK) Row Cycle Time (tRC) Refresh Row Cycle Time (tRFC) Row Active Time (tRAS) Single Power Supply of Operating (IDD0) UL Rating 6ns (min.) / 12ns (max.) 60ns (min.) 72ns (min.) 42ns (min.) / 70,000ns (max.) +2.5V (+/- .2V) 4.400 W 94 V - 0 2.66 (67.60) 2.50 (63.60) 0.456 11.40 0.086 2.15 1.896 (47.40) 2-f 0.07 (1.80) Units : Inches (Millimeters) Z 0.098 2.45 2 199 0.17 (4.20) 0.096 (2.40) 0.07 (1.8) 0.79 (20.00) 0.24 (6.0) 39 41 1 1.25 (31.75) Full R 2x 0.16 ± 0.039 (4.00 ± 0.10) 40 42 12345678901234567890123456789 12345678901234567890123456789 12345678901234567890123456789 12345678901234567890123456789 12345678901234567890123456789 12345678901234567890123456789 12345678901234567890123456789 Protective Cover 12345678901234567890123456789 12345678901234567890123456789 12345678901234567890123456789 12345678901234567890123456789 12345678901234567890123456789 12345678901234567890123456789 12345678901234567890123456789 Y 200 12345678901234567890123456789 12345678901234567890123456789 12345678901234567890123456789 12345678901234567890123456789 12345678901234567890123456789 12345678901234567890123456789 12345678901234567890123456789 Protective Cover 12345678901234567890123456789 12345678901234567890123456789 12345678901234567890123456789 12345678901234567890123456789 12345678901234567890123456789 12345678901234567890123456789 12345678901234567890123456789 Tolerances : ±.006(.15) unless otherwise specified Figure 1: KVR333X64SC25/1G 200-Pin SODIMM Document No. VALUERAM0320-001.A00 11/03/03
