Download Panasonic Toughbook 54

OPERATING INSTRUCTIONS
Basic Guide
Personal Computer
Model No.
CF-54
series
Useful Information
Handling and Maintenance........................... 15
Installing Software........................................ 19
Troubleshooting
Troubleshooting (Basic)................................ 24
Useful Information
Introduction...................................................... 2
Description of Parts......................................... 4
First-time Operation......................................... 8
Turning On / Turning Off............................... 13
Troubleshooting
Getting Started
Getting Started
Contents
LIMITED USE LICENSE AGREEMENT....... 31
Specifications............................................... 35
LIMITED WARRANTY.................................. 40
Please read these instructions carefully before using this product, and save this manual for future use.
Appendix
Appendix
Introduction
Thank you for purchasing this Panasonic product. For optimum performance and safety, please
read these instructions carefully.
In these instructions, the names are referred as follows.
indicates Windows® 8.1 Operating System.
indicates Windows® 7 Operating System.
n Terms and illustrations in these instructions
CAUTION :
Getting Started
NOTE
:
Conditions that may result in minor or moderate injury.
Useful and helpful information.
Enter :
Press [Enter] key.
Fn + F5 :
Press and hold [Fn] key, and then press [F5] key.
Align the pointer to the top right (or bottom right) corner of the
l Display “Charm”: screen to display Charm menu. Alternatively, flick toward the center of the screen from the right edge.
:
Click
(Settings) and then click
(Power).
l
(Start) - [All Programs] : Click
(Start), and then click [All Programs]. You may need to
double-click in some cases.
è :
:
Page in these Operating Instructions or in the Reference Manual.
Reference to the on-screen manuals.
l Some illustrations are simplified to help your understanding and may look different from the
actual unit.
l If you do not log on as an administrator, you cannot use some functions or cannot display
some screens.
l Refer for the latest information about optional products to the catalogs, etc.
l In these instructions, the names and terms are referred as follows.
®
Ÿ“Windows 8.1 Pro Update 64-bit” as “Windows” or “Windows 8.1”
®
®
Ÿ“Windows 7 Professional 32-bit Service Pack 1” and “Windows 7 Professional 64-bit
Service Pack 1” as “Windows” or “Windows 7”
Ÿ DVD MULTI drive as “CD/DVD drive”
Ÿ Circular media including DVD-ROM and CD-ROM as “discs”
l
Screen messages are explained in [English (United States)].
(Depending on the language preference, some screen messages in these instructions are different from the actual screen messages. For example, [Flight mode] may be displayed instead
of [Airplane mode] in some language preference.)
nDisclaimer
Computer specifications and manuals are subject to change without notice. Panasonic Corporation assumes no liability for damage incurred directly or indirectly from errors, omissions or discrepancies between the computer and the manuals.
2
nTrademarks
Microsoft®, Windows®, the Windows logo, and IntelliMouse are registered trademarks of Microsoft
Corporation of the United States and/or other countries.
Intel, Core and PROSet are either registered trademarks or trademarks of Intel Corporation.
SDXC Logo is a registered trademark of SD-3C, LLC.
Getting Started
Adobe, the Adobe logo and Adobe Reader are either registered trademarks or trademarks of
Adobe Systems Incorporated in the United States and/or other countries.
Bluetooth® is a registered trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed to
Panasonic Corporation.
HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC in the United States and other countries.
Names of products, brands, etc., appearing in this manual are trademarks or registered trademarks of their respective own companies.
n On-screen Manual
For further information about the computer, you can refer to the on-screen manual.
l Reference Manual
The Reference Manual contains the practical information to help you fully enjoy the computer’s performance. Update it to the latest version for reference.
l Important Battery Tips
The Important Battery Tips will provide you with the battery information so that you can use
the battery in the optimum condition to obtain longer operation time.
l Update the on-screen manuals
This describes the procedures to update the on-screen manual.
l Connect to a network
This describes the connection procedures using the network devices mounted on this unit.
To access the on-screen manuals, follow the steps below.
Double-click [Manual Selector] on the desktop, and select the on-screen manual.
Alternatively, click the [Manual Selector] tile, on the Start screen and select the on-screen manual.
NOTE
Ÿ [Contents] tab or [Search] tab of the on-screen manuals is displayed on the left side of the
window. Select tab and display the desired item.
3
Description of Parts
A
B
M
C
D
E
Fingerprint
Reader
Contactless
Smartcard
Reader
F
G
H
Getting Started
I
J
K
L
Camera
<Only for model with camera>
Reference Manual “Camera”
è
A:Microphone
B: Ambient Light Sensor
C: Camera Lens
D: Camera Indicator
E:LCD
<Only for model with touchscreen>
è
Reference Manual “Screen Input Operation”
F: LED Indicator
:Caps lock
:Numeric Lock (NumLk)
:Scroll Lock (ScrLk)
:Drive Indicator
:SD Memory Card Indicator
(Blinking: During access or a password is requested)
Reference Manual “SD Memory Card”
è
:Wireless ready
This indicator lights when Wireless
LAN, Bluetooth, and/or Wireless WAN
are connected and ready. It does not
necessarily indicate the On/Off condition of the wireless connection.
Connect to a network
è
G:Power Switch
H:Security Lock
A Kensington cable can be connected. For
further information, read the manual that
comes with the cable.
I: Function Keys
Reference Manual “Key Combinations”
è
J: Keyboard
4
N
O
P
K: CD/DVD Drive*1 / PC Card Slot*2 /
Battery Pack Slot 2*3 / Smart Card Slot*4
*1
Only for model with CD/DVD drive
Reference Manual “CD/DVD Drive”
è
*2
Only for model with PC card slot
Reference Manual “PC Card”
è
*3
When using battery pack 2
Reference Manual “Battery Power”
è
*4
Only for model with smart card slot
L: Battery Pack Slot 1
Reference Manual “Battery Power”
è
M: Fingerprint Reader*5 / Contactless
Smart Card Reader*6
*5
Only for model with fingerprint reader
Reference Manual “Fingerprint Reader”
è
*6Only for model with contactless smart
card reader
Reference Manual “Contactless Smart Card Reader”
è
N: Touchpad
Reference Manual “Touchpad”
è
O: Carrying Handle
Do not use the handle if the handle is worn
or damaged.
P: LED Indicator
:Power Indicator
Off:Power off/Hibernation, Green:
Power on, Blinking Green: Sleep
Blinking green rapidly: Cannot
power on or resume due to low
temperature.
:Battery Indicator 1
:Battery Indicator 2*3
è
Reference Manual “Battery Power”
A
B
C
D
Getting Started
E
F
A: Wireless WAN Antenna
<Only for model with Wireless WAN>
Connect to a network “Wireless WAN”
è
B: GPS Antenna
<Only for model with GPS>
Reference Manual “GPS”
è
C: Display Latch
D: Wireless LAN Antenna
<Only for model with Wireless LAN>
NOTE
lThis computer contains a magnet and
magnetic products at the locations dashed
line circled in the illustration above. Avoid
leaving metallic object or magnetic media
in contact with these areas.
Connect to a network “Wireless LAN”
è
E: Speaker
F: Wireless LAN Antenna / Bluetooth Antenna
<Only for model with Wireless LAN / Bluetooth>
è
Connect to a network “Wireless LAN”
“Bluetooth”
5
Description of Parts
Right side
A
B C
D
E
F
G
H
Getting Started
Rear side
N *7
E
6
I
J
K
L
N *8
N *9
M
A: Hard Disk Drive (Quick Release Drive)
Reference Manual “Hard Disk Drive”
è
B: Wireless Switch
Connect to a network “Disabling/
è
Enabling Wireless Communication”
C: Headset Jack
A headset or headphone can be connected.
D: SD Memory Card Slot
Keep SD Memory Cards away from infants
and small children.
I: HDMI Port
Reference Manual “External Display”
è
Reference Manual “SD Memory Card”
è
E: USB 3.0 Ports
Reference Manual “USB Devices”
è
M: Serial Port
<Only for model with Serial port>
F: USB 3.0 Port (USB Charging)
Do not insert any foreign object in the USB port.
Reference Manual “USB Devices”
è
G: LAN Port
Connect to a network “LAN”
è
H: DC-IN Jack
N: 2nd LAN Port*7/ USB 2.0 Port*8 /
Rugged USB 2.0 Port*9 / GPS*10
*7 Only for model with 2nd LAN port
*8 Only for model with USB 2.0 port
*9 Only for model with rugged USB 2.0 port
*10Only for model with GPS
J: SIM Card Slot
<Only for model with Wireless WAN>
è
Connect to a network “Wireless WAN”
K: Ventilation Hole (Exhaust)
L: VGA Port
<Only for model with VGA port>
è
è
Reference Manual “External Display”
Reference Manual “Serial Port”
Bottom side
A
H
Getting Started
A
B
C
D
E
F
G
A: Back Cover
B: Ventilation Hole (Intake)
C: Hard Disk Latch
Reference Manual “Hard Disk Drive”
è
D: Expansion Bus Connector
Reference Manual “Port replicator”
è
E: Battery Latch 1
Reference Manual “Battery Power”
è
F: Battery Indicator
Reference Manual “Battery Power”
è
G: Battery Pack Latch 2
<When using battery pack 2>
Reference Manual “Battery Power”
è
H: External Antenna Connector
<Only for model with External Antenna
Connector>
7
First-time Operation
nPreparation
ACheck and identify the supplied accessories.
If you do not find the described accessories, contact your support office.
• AC Adaptor. . . . . 1
• AC Cord. . . . . . . 1
Getting Started
Model No: CF-AA5713A
• Battery Pack . . . 1
Model No: ‌CF-VZSU0GW or
CF-VZSU0PW or
CF-VZSU0LW
<Only for model with touchscreen>
• Soft Cloth. . . . . . 1
• OPERATING INSTRUCTIONS - BASIC GUIDE (This book) . . . . . . . . . . . . . . . 1
Depending on the model, the following items are supplied.
• Battery Pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Model No: CF-VZSU0KW
1
1
Insert the battery pack
Insert the battery pack until it touch to the secured position.
CAUTION
l Make sure the latch is securely locked. Otherwise the battery
pack may fall when you carry the computer.
l Do not touch the terminals of the battery pack and the computer. Doing so can make the terminals dirty or damaged,
and may cause malfunction of the battery pack and the computer.
<For CF-VZSU0KW>
8
2
2
Connect your computer to a power outlet
The battery charging starts automatically.
CAUTION
3
3
2
Getting Started
l Do not disconnect the AC adaptor and do not switch the
wireless switch to on until the first-time operation procedure
is completed.
l When using the computer for the first time, do not connect
any peripheral device except the battery pack and AC adaptor.
l Handling the AC adaptor
Problems such as sudden voltage drops may arise during
periods of thunder and lightning. Since this could adversely
affect your computer, an uninterruptible power source (UPS)
is highly recommended unless running from the battery pack
alone.
lWhen the DC plug is not connected to the computer, disconnect the AC cord from your electrical outlet. Power is
consumed simply by having the AC adaptor plugged into an
electrical outlet.
Open the display
A Push the top of the latch (A) to release it.
BHold the side/ handle of the computer with either of your
hands and then lift up the display to open.
CAUTION
㪘
1
l Do not open the display wider than necessary (180° or
more), and do not apply excessive pressure to the LCD. Do
not open or close the computer holding the edge of the LCD
segment.
9
First-time Operation
4
4
Press and hold the power switch
lights.
㻮
CAUTION
Getting Started
㻯
(B) until the power indicator (C)
l Do not press the power switch repeatedly.
l The computer will be forcibly turned off if you press and hold
the power switch for four seconds or longer.
l Once you turn off the computer, wait for ten seconds or more
before you turn on the computer again.
l Do not perform the following operation until the drive indicaturns off.
tor
Ÿ Connecting or disconnecting the AC adaptor
Ÿ Pressing the power switch
Ÿ Touching the keyboard, touchpad, touchscreen <only for
model with touchscreen> or external mouse
Ÿ Closing the display
Ÿ Turn on/off the wireless switch
l When the CPU temperature is high, the computer may not
start up to prevent overheating of the CPU. Wait until the
computer cools down, and then turn the power on again. If
the computer does not power on even after cooling down,
contact Panasonic Technical Support (è pages 40 - 48).
l Any changes from the default setting of the Setup Utility must
not be made until the First-time Operation is completed.
5
10
Turn on the computer
Setup Windows
Follow the on-screen instructions.
lThe computer restarts several times. Do not touch the keyhas
board or touchpad, and wait until the drive indicator
turned off.
lAfter the computer is turned on, the screen remains black
or unchanged for a while, but this is not a malfunction. Wait
for a moment until the Windows setup screen appears.
lDuring setup of Windows, use the touchpad and clicking to
move the pointer and to click an item.
lSetup of Windows will take approximately
5 minutes /
20 minutes.
Go to the next step, confirming each message on the display.
lYou can set the Wireless Network after the setup of Windows is complete.
If “Get online” is displayed, select “Skip this
step”.
“Join a wireless network” screen may not appear.
CAUTION
Getting Started
l You can change the user name, password, image and security setting after setup of Windows.
l Remember your password. If you forget the password, you
cannot use Windows. Creating a password reset disk beforehand is recommended.
l Use standard characters as a computer name: numbers 0
through 9, uppercase and lowercase letters from A to Z, and
the hyphen (-) character. If the error message “The computer
name is not valid” appears, check if characters other than
the above are not entered. If the error message still remains
on the display, set the key entry mode to English (“EN”) and
enter characters.
l Do not use the following words and characters for user
name: CON, PRN, AUX, CLOCK$, NUL, COM1 to COM9,
LPT1 to LPT9, LPT, @, &, space. In particular, if you create
a user name (account name) that includes the “@” mark, a
password will be requested at the log-on screen, even if no
password has been set. If you try to log on without entering
a password, “The user name or password is incorrect.” may
sign in /
be displayed and you will not be able to
log on to Windows (è page 27).
6Update the on-screen manual
Sign in /
A Connect to the internet.
Log on to Windows as an administrator.
For further information, refer to
Connect to a network.
B Update the on-screen manual.
Double-click [Manual Selector] on the desktop.
Alternatively, click the [Manual Selector] tile
on the Start screen.
Follow the on-screen instructions.
7Create a recovery disc
A recovery disc allows you to install OS and restore its factory
default condition, in case, the recovery partition of the HDD is
damaged.
We recommend creating a recovery disc before you begin using
the computer.
Refer to è
Reference Manual “Recovery Disc Creation Utility” about creating the disc.
11
First-time Operation
NOTE
l PC Information Viewer
This computer periodically records the management information of the hard disk, etc. The maximum data volume for each record is 1024 bytes.
This information is only used for estimating the cause in the case when the hard disk goes down by
any possibility. They are never sent to outside via network nor used for any other purpose except
for the purpose described the above.
To disable the function, add the check mark for [Disable the automatic save function for management information history] in [Hard Disk Status] of PC Information Viewer, and click [OK].
(è
Reference Manual “Troubleshooting (Advanced)” - “Checking the Computer’s Usage Status”)
Getting Started
n Before using wireless function
A Open the cover, and then Slide the wireless switch to ON.
- [Change PC Settings] - [Network] - [Airplane mode].
B Display “Charm” and click
Set [Airplane mode] to [Off], and then;
Set [Wi-Fi] to [On] (for wireless LAN).
Set [Mobile broadband] to [On] (for wireless WAN).
Set [GPS] to [On] (for wireless WAN).
Set [Bluetooth] to [On] (for Bluetooth).
Set [GPS\GNSS] to [On] (for GPS).
n To change the partition structure
You can shrink a part of an existing partition to create unallocated disk space, from which you can
create a new partition.
In the default setting, you can use a single partition.
A
Right-click
at the bottom left corner of the Desktop screen.
Click
(Start) and right-click [Computer], then click [Manage].
l A standard user needs to enter an administrator password.
B Click [Disk Management].
C Right-click the partition for Windows (“c” drive in the default setting), and click [Shrink Volume].
l The partition size depends on the computer specifications.
D Input the size in [Enter the amount of space to shrink in MB] and click [Shrink].
l You cannot input a larger number than the displayed size.
l To select [Reinstall Windows to the OS related partitions] in installing OS (è page 21),
70 GB /
60 GB or more is necessary for [Total size after shrink
in MB].
E Right-click [Unallocated] (the shrunk space in the step D) and click [New Simple Volume].
F Follow the on-screen instructions to make the settings, and click [Finish].
Wait until formatting is completed.
NOTE
l You can create an additional partition using remaining unallocated space or newly creating
unallocated space.
l To delete a partition, right-click the partition and click [Delete Volume] in the step C.
12
Turning On / Turning Off
Turning On
Press and hold the power switch
(è page 4) until the power indicator
(è page 4) lights.
NOTE
Getting Started
l Do not press the power switch repeatedly.
l The computer will forcibly be turned off if you press and hold the power switch for four seconds or longer.
l Once you turn off the computer, wait for ten seconds or more before you turn on the computer
again.
turns off.
l Do not perform the following operation until the drive indicator
• Connecting or disconnecting the AC adaptor
• Pressing the power switch
• Touching the keyboard, touchpad, touchscreen <only for model with touchscreen> or external mouse
• Closing the display
• Turn on/off the wireless switch
Turning Off
You can shut down the computer by using either of the following steps.
• From the Desktop screen:
at the bottom left corner of the Desktop screen.
ARight-click
B Click [Shut down or sign out] - [Shut down].
•From the Start screen:
- [Shut down].
AClick
• Both the Start screen and Desktop screen:
A Display “Charm” and touch .
B Touch [Power] - [Shut down].
AClick
(Start) - [Shutdown].
NOTE
l
To turn off the computer completely, proceed as follows.
- [Change PC settings] - [Update and recovery] - [Recovery].
A Display “Charm” and click
B Click [Restart now] under “Advanced startup”.
C Click [Turn off your PC].
13
Turning On / Turning Off
Precautions against Starting Up/Shutting Down
l Do not do the following
• Connecting or disconnecting the AC adaptor
• Pressing the power switch
• Touching the keyboard, touchpad, touchscreen <only for model with touchscreen> or external mouse
• Closing the display
• Turn on/off the wireless switch
NOTE
Getting Started
l To conserve power, the following power saving methods are set at the time of purchase.
• The screen automatically turns off after :
10 minutes (when AC adaptor is connected) of inactivity
5 minutes (when operating on battery power) of inactivity
• The computer automatically enters sleep*1 after :
20 minutes (when AC adaptor is connected) of inactivity
15 minutes (when operating on battery power) of inactivity
*1
Refer to
Reference Manual “Sleep or Hibernation Functions” about resuming from sleep.
14
Handling and Maintenance
Operation environment
l Place the computer on a flat stable surface not subject to shock, vibration, and danger of
dropping. Do not place the computer upright or turn it over. If the computer is exposed to an
extremely strong impact, it may become damaged.
l Operating environment
Temperature:Operation :-10 °C to 50 °C {14 °F to 122 °F} (IEC60068-2-1, 2)*1
Storage
:-20 °C to 60 °C {- 4 °F to 140 °F}
Humidity:
Operation :30% to 80% RH (No condensation)
Storage :30% to 90% RH (No condensation)
Even
within
the
above
temperature/humidity
ranges, operation for a long time in extreme en
vironments, smoking nearby, or operation in places where oil is used or where there is a lot of
dust will result in the product deterioration and will shorten the product life.
*1
Do not expose the skin to this product when using the product in a hot or cold environment.
( OPERATING INSTRUCTIONS - Read Me First)
If the computer is wet in temperatures of 0 °C {32 °F} or below, freeze damage may occur. Make sure to
dry off the computer in such temperatures.
Useful Information
l Do not place the computer in the following areas, otherwise the computer may be damaged.
Ÿ Near electronic equipment. Image distortion or noise may occur.
Ÿ In extremely high or low temperature.
l As the computer can become hot during operation, keep it away from items that are sensitive
to heat.
Handling cautions
This computer is designed to minimize shock to parts such as the LCD and the hard disk drive
and equipped with a drip-proof keyboard, but no warranty is provided against any trouble caused
by shock. Be extremely careful when handling the computer.
l When carrying the computer:
Ÿ Turn off the computer.
Ÿ Remove all external devices, cables, PC Cards and other protruding objects.
Ÿ Remove a disc in the CD/DVD drive (Only for model with CD/DVD drive).
Ÿ Do not drop or hit the computer against solid objects.
Ÿ Do not leave the display open.
Ÿ Do not grip the display part.
l Do not put anything (e.g., a piece of paper) between the display and keyboard.
l When you board an airplane, take the computer with you and never put it in your checked luggage. When using the computer on airplane, follow the airline’s instructions.
l When carrying a spare battery, put it in a plastic bag to protect its terminals.
l The touchpad is designed to be used by finger tip. Do not place any object on its surface and
do not press down strongly with sharp-pointed or hard objects that may leave marks (e.g.,
nails, pencils and ball point pens).
l Avoid any harmful substances such as oil from getting into the touchpad. The pointer may not
work correctly.
l Be careful not to get injured by dropping or getting hit when carrying the computer.
<Only for model with touchscreen>
l Use only the pen (optional) to touch the screen. Do not place any object on its surface and do
not press down strongly with sharp-pointed or hard objects that may leave marks (e.g., nails,
pencils and ball point pens).
l Do not use the screen when dust or dirt (e.g., oil) is on the screen. Otherwise foreign particles
on the screen/pen (optional) can scratch the screen surface or obstruct the pen (optional)
operation.
15
Handling and Maintenance
l Use the pen (optional) only for touching the screen. Using it for any other purpose may damage the pen (optional) and result in scratches on the screen.
n When using peripheral devices
Follow these instructions and the Reference Manual to avoid any damage to the devices. Carefully read the instruction manuals of the peripheral devices.
l Use the peripheral devices conforming to the computer’s specifications.
l Connect to the connectors in the correct direction.
l If it is hard to insert, do not try forcibly but check the connector’s shape, direction, alignment of
pins, etc.
l If screws are included, fasten them securely.
l Remove the cables when you carry the computer. Do not pull the cables forcibly.
nPreventing your computer from unauthorized use via wireless LAN/Bluetooth/wireless
WAN
<Only for model with wireless LAN/Bluetooth/wireless WAN>
l Before using wireless LAN/Bluetooth/wireless WAN, make the appropriate security settings
such as data encryption.
Useful Information
n Battery Recalibration
l The battery recalibration may take a long time due to the large battery capacity. This is not a
malfunction.
<When performing “Battery Recalibration” after shutting down Windows>
Ÿ Full charge: Approximately 2.5 hours
Ÿ Complete discharge: Approximately 4 hours (with CF-VZSU0GW / CF-VZSU0PW / CFVZSU0LW) / Approx. 3 hours (with CF-VZSU0KW)
When performing “Battery Recalibration” without shutting down Windows, it may take more
time to charge / discharge.
n Battery duration
lNote that the computer consumes electricity even when the computer power is off. If the battery pack is fully charged, the battery will fully discharge in the following period of time:
Status
Discharge period
CF-VZSU0GW / CF-VZSU0PW CF-VZSU0LW
When power is off Approx. 5 weeks
Approx. 3.5 weeks
Approx. 2.5 days
Approx. 2 days
In sleep*2
*2
Approx. 12 days
Approx. 8.5 days
In hibernation
*2
When “Wake Up from wired LAN” is enabled.
The battery duration while the USB port continuous charging function is not used.
Maintenance
To clean the LCD panel
If drops of water or other stains get on the surface of the LCD panel, wipe them off immediately.
Failure to do so may result in staining.
<Only for model with touchscreen>
Use the soft cloth included with the computer. (For further information, refer to “Suggestions
About Cleaning the LCD Surface”.
Reference Manual “Screen Input Operation”)
<Only for model without touchscreen>
Wipe with a soft dry cloth such as gauze.
16
To clean areas other than the LCD panel
Wipe with a soft dry cloth such as gauze. When using detergent, dip a soft cloth in water-diluted
detergent and wring it thoroughly.
CAUTION
l Do not use benzene, thinner, or rubbing alcohol since it may adversely affect the surface causing discoloration, etc. Do not use commercially-available household cleaners and cosmetics,
as they may contain components harmful to the surface.
l Do not apply water or detergent directly to the computer, since liquid may enter inside of the
computer and cause malfunction or damage.
Dispose of Computer
nPreparation
l Remove all peripherals (SD memory card, etc.).
Reference Manual “Hard Disk Data Erase Utility”)
l Erase the stored data. (è
<Only for model with Built-in Bridge Battery>
<For Europe and U.S.A./Canada>
Useful Information
Attention Customers
Don’t remove the battery by yourself. The battery must be removed by qualified professionals.
When disposing of this product, be sure to contact qualified professionals to remove the battery.
Attention Qualified professionals to remove the battery
Dispose of this product correctly in accordance with the local regulations after removing the
battery as shown in the following procedure.
CAUTION
l Never disassemble the computer except before disposal.
l Refer to the precautions when disposing of the computer
(è OPERATING INSTRUCTIONS - Read Me First).
nRemove the built-in battery
1. Turn off the computer, and disconnect the AC adaptor.
2. Turn over the computer, remove the battery pack.
3. Remove the screws and the cover (A).
<Model without 2nd LAN/
USB 2.0 port/Rugged USB port/
VGA port/Serial port/Discrete Video Controller>
A
A
17
Handling and Maintenance
4. Remove the cover (B) and lift the expansion bus connector (C).
C
B
è
5. Remove the connectors on the built-in bridge battery (F), and then remove the screw (D)
and the circuit (E).
D
E
Useful Information
F
6. Pull out the built-in bridge battery with the sheet cover.
7. Open the sheet cover (G) and remove the built-in bridge battery (H). And confirm the
recycle mark of the built-in battery.
G
H
8. Insulate the connectors on the built-in bridge battery by covering them with plastic tape, for
example.
18
Installing Software
Installing software will return the computer to the default condition. When you install the software, the hard disk data will be erased.
Back up important data to other media or an external hard disk before installation.
CAUTION
l Do not remove the quick release drive during installation process.
l Do not delete the Recovery Partition on the hard disk. The disk space in the partition is not
available to store data.
To check the Recovery Partition, perform the following methods.
A
Right-click
at the bottom left corner of the Desktop screen.
Click
(Start) and right-click [Computer], then click [Manage].
l A standard user needs to enter an administrator password.
Click [Disk Management].
Remove everything and reinstall Windows
n
Preparation
l Remove all peripherals. (SD memory card, etc.)
l Connect the AC adaptor and do not remove it until installation is complete.
Perform “Remove everything and reinstall Windows”.
Useful Information
1
- [Change PC settings] - [Update and recovery] - [RecovA Display “Charm” and click
ery].
B Click [Get Started] under “Remove everything and reinstall Windows”.
C Click [Next].
D Select the option.
l Just remove my files
Perform the reinstallation of the Windows in a few moments (Approximately 20 minutes).
l Fully clean the drive
By fully cleaning, the deleted files can not be recovered easily and the security level
will be increased. The processing time will be longer (Approximately 140 minutes).
Follow the on-screen instructions.
After the reinstallation, the computer will restart.
l Do not interrupt installation, for example by turning off the computer or performing other
operation.
Otherwise installation may become unavailable as Windows may not start up or the
data may be corrupted.
2
Perform the “First-time Operation” ( page 10).
NOTE
l The date and time, and the time zone may not be correct. Be sure to set them correctly.
3
4
Perform Windows Update.
<Only for model with TPM> Clear TPM.
A Perform either of the following procedures.
at the bottom left corner of the Desktop screen.
lRight-click
on the Start screen.
lClick
B Click [Run], then input [tpm.msc] and click [OK].
19
Installing Software
C Click [Clear TPM…] under “Actions” on the right of the “TPM Manager on Local Computer” screen.
D Click [Restart] of the “Manage the TPM security hardware” screen.
The computer will restart.
E When “TPM configuration change was requested to ...” is displayed, press F12 .
F Click the Desktop tile, and when “TPM is ready” appears, click [Close].
n Disk recovery
You can reinstall the OS that was pre-installed at the time of purchase (Windows 8.1 or Windows 7).
If reinstallation using the method described in “Remove everything and reinstall Windows” is not successful, follow the steps below.
Preparation
l Remove all peripherals.
l Connect the AC adaptor and do not remove it until installation is complete.
1
Start the Setup Utility.
- [Change PC settings] - [Update and recovery] - [RecovA Display “Charm”, and click
ery].
B Click [Restart now] under “Advanced startup”.
C Click [Troubleshoot] - [Advanced options] - [UEFI Firmware Settings] - [Restart].
Useful Information
Turn on the computer, and press F2 or Del while [Panasonic] boot screen is displayed.
l If the [Panasonic] boot screen is not displayed, turn on the computer while holding down
F2 or Del.
l If the password is requested, enter the Supervisor Password.
2
Write down all of the contents of the Setup Utility and press F9.
3
Check the [UEFI Boot] setting of the Setup Utility.
At the confirmation message, select [Yes] and press Enter.
Check the [UEFI Boot] setting of the Setup Utility.
[UEFI Boot] should be set to as follows.
When installing Windows 8.1: [Enabled]
When installing Windows 7 : [Disabled]
4
<Only for model with onboard drive>
Check the [Primary boot drive] setting of the Setup Utility.
5Press F10 .
At the confirmation message, select [Yes] and press Enter.
Computer will restart.
6Press F2 or Del while [Panasonic] boot screen is displayed.
The Setup Utility starts up.
lIf the password is requested, enter the Supervisor Password.
7
Select the [Exit] menu, then select [Recovery Partition] and press
Enter .
8
Click [Next] and click [YES].
9
20
Click [Reinstall Windows] and click [Next].
At the License Agreement screen, click [Yes, I agree to the provisions
above and wish to continue!] and click [Next].
10 Click [Next].
<Only for model with onboard drive>
If the installation drive is displayed, confirm it.
If the option is displayed, select the setting and click [Next].
l [Initialize and reinstall Windows to the whole Disk]
Select this option when you want to install Windows to the factory default. After installation, you can create a new partition. For how to create a new partition, refer to “To
change the partition structure” ( page 12)
l [Reinstall Windows to the OS related partitions]*1
Select this option when the hard disk has already been divided into several partitions
and you want to keep the partition structure. For how to create a new partition, refer to “To
change the partition structure” ( page 12).
*1
This does not appear if Windows cannot be installed to the recovery partition and the area usable by
Windows.
11
At the confirmation message, click [YES].
Select OS (32bit or 64bit) and click [OK].
12
13 <Only for model with onboard drive>
Select the setting and click [Next].
14 At the confirmation message, click [YES].
Useful Information
Installation starts according to the instructions on the screen. (It will take approximately
20 minutes.)
l Do not interrupt installation, for example by turning off the computer or performing other
operation.
Otherwise installation may become unavailable as Windows may not start up or the
data may be corrupted.
15 When Ending process screen is displayed, click [OK] to turn off the
computer.
16 Turn on the computer.
l If the password is requested, enter the Supervisor Password.
17 Perform the “First-time Operation” ( page 10).
NOTE
l
The date and time, and the time zone may not be correct. Be sure to set
them correctly.
18 Start the Setup Utility and change the settings as necessary.
19 Perform Windows Update.
<Only for model with TPM> Clear TPM ( page 19).
20
n Using Recovery Disc
Use the Recovery Disc in the following conditions.
Ÿ You have forgotten the administrator password.
Ÿ Installation is not complete. The recovery partition in the hard disk may be broken.
<Only for Windows 7 downgrade model>
Ÿ
To change OS from Windows 7 to Windows 8.1, or vice versa.
NOTE
l
To change OS from 32 bit to 64 bit, or vice versa, install OS using the recovery partition in the hard disk.
21
Installing Software
Preparation
lPrepare the following items:
USB memory device can also be used as a recovery
Ÿ Recovery Disc (
disc.)
(
Reference Manual “Recovery Disc Creation Utility”)
Ÿ Commercially available optical drive (Only for model without CD/DVD drive)
lRemove all peripherals (except for the commercially available optical drive).
lConnect the AC adaptor and do not remove it until installation is complete.
1
2
<Only for model without CD/DVD drive>
Connect the commercially available optical drive to the USB port.
Start the Setup Utility.
- [Change PC settings] - [Update and recovery] - [RecovA Display “Charm”, and click
ery].
B Click [Restart now] under “Advanced startup”.
C Click [Troubleshoot] - [Advanced options] - [UEFI Firmware Settings] - [Restart].
Useful Information
Turn on the computer, and press F2 or Del while [Panasonic] boot screen is displayed.
lIf the [Panasonic] boot screen is not displayed, turn on the computer while holding down
F2 or Del .
lIf the password is requested, enter the Supervisor Password.
3
Write down all of the contents of the Setup Utility and press F9.
4
Check the [UEFI Boot] setting of the Setup Utility.
At the confirmation message, select [Yes] and press Enter.
[UEFI Boot] should be set to as follows.
When the recovery disc for Windows 8.1 is used: [Enabled]
When the recovery disc for Windows 7 is used : [Disabled]
5
Set the Recovery Disc into the CD/DVD drive or commercially available
optical drive.
6Press F10 .
At the confirmation message, select [Yes] and press Enter.
Computer will restart.
7Press F2 or Del while [Panasonic] boot screen is displayed.
The Setup Utility starts up.
lIf the password is requested, enter the Supervisor Password.
8
Select the [Exit] menu, then select CD/DVD drive or commercially
available optical drive in [Boot Override] and press Enter .
The computer will restart.
9
Click [Reinstall Windows] and click [Next].
At the confirmation message, click [YES].
10
11 At the License Agreement screen, click [Yes, I agree to the provisions
above and wish to continue!] and click [Next].
22
12 Click [Next].
<Only for model with onboard drive>
If the installation drive is displayed, confirm it.
If the option is displayed, select the setting and click [Next].
l [Initialize and reinstall Windows to the whole Disk]
Select this option when you want to install Windows to the factory default. After installation, you can create a new partition. For how to create a new partition, refer to “To
change the partition structure” ( page 12).
l [Reinstall Windows to the OS related partitions]*2
Select this option when the hard disk has already been divided into several partitions
and you want to keep the partition structure. For how to create a new partition, refer to “To
change the partition structure” ( page 12).
*2
This does not appear if Windows cannot be installed to the recovery partition and the area usable by Windows.
13 <Only for model with onboard drive>
Select the setting and click [Next].
14 At the confirmation message, click [YES].
Useful Information
Installation starts according to the instructions on the screen. (It will take approximately
30 - 45 minutes.)
l Do not interrupt installation, for example by turning off the computer or pressing
Ctrl + Alt + Del .
Otherwise installation may become unavailable as Windows may not start up or the
data may be corrupted.
15 When Ending process screen is displayed, remove the Recovery Disc
and CD/DVD Drive or commercially available optical drive and then
click [OK].
Follow the on-screen instructions.
Some models may take approximately 40 minutes.
16 Perform the “First-time Operation” ( page 10).
17 Start the Setup Utility and change the settings as necessary.
18 Perform Windows Update.
19
<Only for model with TPM> Clear TPM ( page 19).
23
Troubleshooting (Basic)
Follow the instructions below when a problem has occurred. There is also an advanced troubleshooting guide in the “Reference Manual”. For a software problem, refer to the software’s instruction manual. If the problem persists, contact Panasonic Technical Support (è pages 40 - 48).
You can also check the computer’s status in the PC Information Viewer (è
Reference Manual
“Troubleshooting (Advanced)”).
n Starting Up
Cannot start up.
The power indicator or battery indicator is not lit.
l Connect the AC adaptor.
l Insert a fully charged battery.
l Remove the battery pack and the AC adaptor, then connect them
again.
l Even if the AC adaptor and battery pack are correctly connected,
if the battery indicator is not lit, the AC adaptor protection function
may be operating. Disconnect the AC cord, wait three minutes or
more, and reconnect the AC cord.
l If a device is connected to the USB port, disconnect the device, or
set [USB Port] or [Legacy USB Support] to [Disable] in the [Advanced] menu of the Setup Utility.
lPress Fn + F8 to turn off the concealed mode.
l Check the [UEFI Boot] setting of the Setup Utility. [UEFI Boot]
[Enabled] /
[Disabled].
should be set to
<Only
for
model
with
onboard
drive>
l
Check the [Primary boot drive] setting of the Setup Utility.
The power is turned on but l The computer is warming up before start up. Wait for the computer to start up (takes up to 30 minutes). If, “Cannot warm up the
“Warming up the system (up
system” is displayed, the computer failed to warm up and does
to 30 minutes)” appears.
not start. In this case, turn off the computer, leave it in an environment of 5 °C {41 °F} or higher temperature for about an hour, and
then turn on the power once more.
Troubleshooting
Cannot turn on the computer. l Leave it in an environment of 5 °C {41 °F} or higher temperature
for about an hour, then turn on the power again.
The computer does not resume from sleep.
(The power indicator blinks
<Model without HDD heater> rapidly in green / <Model
with HDD heater> alternately
in green and orange.)
l Turn off the computer and remove the RAM module, then confirm
After adding or changing
whether the RAM module has compliant to specification. When
the RAM module, the power
the RAM module has conformed to specification, install it again.
is turned on but nothing is
displayed on the screen.
l Press and hold the power switch for 4 seconds or longer to shut
The computer does not
down the computer forcibly. (Data not saved will be lost.) Then
enter sleep mode while the
disable the screen saver.
screen saver is running. (The
screen stays black.)
It takes time for the power
indicator to light up.
24
l If the power switch is pressed immediately after the battery pack
has been mounted on the computer, and while the AC adaptor is
not connected, it may take about five seconds before the power
indicator lights up and the computer turns on. This is because
the computer is checking the remaining battery charge; it is not a
malfunction.
n Starting Up
You have forgotten the pass- l Supervisor Password or User Password: Contact Panasonic Technical Support (è pages 40 - 48).
word.
l Administrator password:
Ÿ If you have a password reset disk, you can reset the administrator password. Set the disk and enter any wrong password, then
follow the on-screen instructions and set a new password.
Ÿ If you do not have a password reset disk, reinstall (è page 19)
and set up Windows, and then set a new password.
l A floppy disk is in the drive (optional) and it does not contain
“Remove disks or other
system startup information. Remove the floppy disk and press any
media. Press any key to
key.
restart” or a similar message
If
a device is connected to the USB port, disconnect the device, or
l
appears.
set [USB Port] or [Legacy USB Support] to [Disabled] in the [Advanced] menu of the Setup Utility.
l If the problem persists after removing the disk, it may be a hard
disk failure. Contact Panasonic Technical Support (è pages 40
- 48).
l Set [UEFI Boot] to [Disabled] in the [Boot] menu of the Setup Utility.
Windows startup and opera- lPress F9 in the Setup Utility (è
Reference Manual “Setup
Utility”) to return the Setup Utility settings (excluding the passtion is slow.
words) to the default values. Start the Setup Utility and make the
settings again. (Note that the processing speed depends on the
application software, so this procedure may not make Windows
faster.)
l If you installed a resident software after purchase, turn off the
residence.
The date and time are incor- l Make the correct settings.
A Open the Control Panel.
rect.
1. Perform either of the following procedures.
at the bottom left corner of the Desktop
ŸRight-click
screen.
on the Start screen.
ŸClick
2. Click [Control Panel].
Troubleshooting
Click
(Start) - [Control Panel].
B Click [Clock, Language, and Region] - [Date and Time].
l If the problem persists, the internal clock battery may need to be
replaced. Contact Panasonic Technical Support (è pages 40 48).
l When the computer is connected to LAN, check the date and time
of the server.
l The 2100 A.D. or later year will not be correctly recognized on this
computer.
[Executing Battery Recalibration] screen appears.
l The Battery Recalibration was cancelled before Windows was
shut down last time. To start up Windows, turn off the computer by
the power switch, and then turn on.
25
Troubleshooting (Basic)
n Starting Up
l Select [Enabled] in [Password On Resume] in the [Security] menu
[Enter Password] does not
Reference Manual “Setup Utility”).
of the Setup Utility (è
appear when resuming from
l The Windows password can be used instead of the password set
sleep/hibernation.
in the Setup Utility.
A Add a password.
1.Display “Charm” and click
- [Change PC settings] - [Accounts].
2.Click [Sign-in options], and click [Add] under “Password”.
1.Click
(Start) - [Control Panel].
2.Click [User Accounts and Family Safety] - [Add or remove
user accounts].
B Set up the following.
1. Open the Control Panel, click [System and Security] [Power Options] - [Require a password on wakeup].
2.Add a check mark for [Require a password].
1.Click [Control Panel] - [System and Security] - [Power Option] - [Require a password when the computer wakes] and
add a check mark for [Require a password].
Troubleshooting
Cannot resume.
26
l One of the following operations may have been carried out. Press
the power switch turn on the computer. Data not saved will be
lost.
Ÿ In sleep mode, the AC adaptor or battery pack was disconnected, or a peripheral was connected or disconnected.
Ÿ The power switch was slid for four seconds or longer to forcibly
turn off the computer.
l An error may occur when the computer automatically enters the
sleep or hibernation mode while the screensaver is active. In
this case, turn off the screensaver or change the pattern of the
screensaver.
n Starting Up
Other startup problems.
Reference Manual “Setup Utility”)
l Start in the Setup Utility (è
to return the Setup Utility settings (excluding the passwords) to
the default values. Start the Setup Utility and make the settings
again.
l Remove all peripheral devices.
l Check to see if there was a disk error.
A Remove all peripheral devices including an external display.
B
Perform either of the following procedures.
at the bottom left corner of the Desktop
ŸRight-click
screen, click [File Explorer].
on the Start screen, click [File Explorer].
ŸClick
(Start) - [Computer].
Click
[Windows (C:)] /
[Local
CRight-click
Disk (C:)], and click [Properties].
[Check] /
[Check
D Click [Tools] Now...].
Ÿ A standard user needs to enter an administrator password.
E Follow the on-screen instructions.
n Entering Password
Even after entering the pass- l The computer may be in ten-key mode.
If the NumLk indicator
lights, press NumLk to disable the tenword, password input screen
key mode, and then input.
is displayed again.
l The computer may be in Caps Lock mode.
lights, press Caps Lock to disIf the Caps Lock indicator
able the Caps Lock mode, and then input.
l The user name (account name) includes the “@” mark.
-If another user account name exists:
Log on to Windows using another user account name, and
delete the account name that includes “@”. Then create a new
account name.
-If no other account name exists:
You need to reinstall Windows (è page 19).
Troubleshooting
Cannot log on to Windows.
(“The user name or password is incorrect.” is displayed.)
n Shutting down
Windows does not shut
down.
l Remove the USB device.
l Wait 1 or 2 minutes. It is not a malfunction.
27
Troubleshooting (Basic)
nDisplay
No display.
l The external display is selected. Press Fn + F3 or
switch the display.
+ P to
Wait until the display has been switched completely before press+ P again.
ing Fn + F3 or
Troubleshooting
Then click the display mode.
l When using an external display,
Ÿ Check the cable connection.
Ÿ Turn on the display.
Ÿ Check the settings of external display.
lThe display is turned off by the power-saving function. The screen
returns to the original state when you operate keyboard, touchpad,
or touchscreen (only for model with touchscreen). When operating the keyboard, press a key that does not affect the computer
operation, such as Ctrl .
l The computer entered sleep or hibernation by the power-saving
function. To resume, press the power switch.
The screen is dark.
l The screen is darker when the AC adaptor is not connected.
Press Fn + F2 and adjust the brightness. As you increase the
brightness, battery consumption increases.
You can separately set the brightness for when the AC adaptor is
connected and when not connected.
l Press Fn + F8 to turn off the concealed mode.
l <Only for model with touchscreen> Under factory default settings,
the brightness of the display screen will adjust automatically based
on the ambient light detected by the ambient light sensor. You can
adjust the settings for this sensor.
The screen is disordered.
l Changing the number of display colors and resolution may affect
the screen. Restart the computer.
l Connecting/disconnecting an external display may affect the
screen. Restart the computer.
l Resuming from sleep or hibernation may affect the screen of the
external display. Restart the computer.
During Simultaneous display, l When using the Extended Desktop, use the same display colors
for the external display as those used by the LCD. If you continue
one of the screens becomes
to experience problems, try changing the display.
disordered.
lSimultaneous display cannot be used until Windows startup is
complete (during Setup Utility, etc.).
The external display does
not work normally.
28
l If the external display does not support the power saving function,
it may not work normally when the computer enters the power
saving mode. Turn off the external display.
nTouchpad
The pointer does not work.
l When using the external mouse, connect it correctly.
l Restart the computer using the keyboard.
l If the computer does not respond to keyboard commands, read “No
response” (è page 30).
Cannot input using the
touchpad.
l Set [Touch Pad] to [Enabled] in the [Main] menu of the Setup Utility.
l The drivers for some mice may disable the touchpad. Check your
mouse’s operating instructions.
n On-screen Document
The document of PDF format is not displayed.
l Install Adobe Reader.
A Log on to Windows as an administrator.
(Start) and input “c:\util\reader\en\Pinstall.bat” in
BClick
[Search programs and files] then press Enter .
C Update Adobe Reader to its latest version.
If your computer is connected to the internet, start up Adobe
Reader and click [Help] - [Check for Updates...].
n CD/DVD Drive (Only for model with CD/DVD drive)
l A pin of 1.3 mm in diameter is
recommended to remove a disc
using the emergency hole (A).
When the diameter of the pin is
smaller than this, insert the pin
slightly downward.
A
Troubleshooting
The tray does not come out
although inserting a pointed
object to the emergency
hole.
29
Troubleshooting (Basic)
nOthers
Troubleshooting
No response.
30
lPress Ctrl + Shift +Esc to open Task Manager and close the
software application that is not responding.
l An input screen (e.g., password input screen at startup) may be
hidden behind another window. Press Alt + Tab to check.
l Press the power switch for 4 seconds or longer to shut down the
computer, and then press the power switch to turn it on. If the application program does not work normally, uninstall and reinstall
the program. To uninstall,
A Open the Control Panel.
1. Perform either of the following procedures.
at the bottom left corner of the Desktop
ŸRight-click
screen.
on the Start screen.
ŸClick
2. Click [Control Panel].
Click
(Start) - [Control Panel].
B Click [Program] - [Uninstall a program].
LIMITED USE LICENSE AGREEMENT
THE SOFTWARE PROGRAM(S) (“PROGRAMS”) FURNISHED WITH THIS PANASONIC PRODUCT (“PRODUCT”) ARE LICENSED ONLY TO THE END-USER (“YOU”), AND MAY BE USED
BY YOU ONLY IN ACCORDANCE WITH THE LICENSE TERMS DESCRIBED BELOW. YOUR
USE OF THE PROGRAMS SHALL BE CONCLUSIVELY DEEMED TO CONSTITUTE YOUR ACCEPTANCE OF THE TERMS OF THIS LICENSE.
Panasonic Corporation has developed or otherwise obtained the Programs and hereby licenses
their use to you. You assume sole responsibility for the selection of the Product (including the
associated Programs) to achieve your intended results, and for the installation, use and results
obtained therefrom.
LICENSE
A. Panasonic Corporation hereby grants you a personal, non-transferable and non-exclusive
right and license to use the Programs in accordance with the terms and conditions stated in
this Agreement. You acknowledge that you are receiving only a LIMITED LICENSE TO USE
the Programs and related documentation and that you shall obtain no title, ownership nor any
other rights in or to the Programs and related documentation nor in or to the algorithms, concepts, designs and ideas represented by or incorporated in the Programs and related documentation, all of which title, ownership and rights shall remain with Panasonic Corporation or
its suppliers.
B. You may use the Programs only on the single Product which was accompanied by the Programs.
C. You and your employees and agents are required to protect the confidentiality of the Programs. You may not distribute or otherwise make the Programs or related documentation
available to any third party, by time-sharing or otherwise, without the prior written consent of
Panasonic Corporation.
D. You may not copy or reproduce, or permit to be copied or reproduced, the Programs or related
documentation for any purpose, except that you may make one (1) copy of the Programs for
backup purposes only in support of your use of the Programs on the single Product which was
accompanied by the Programs. You shall not modify, or attempt to modify, the Programs.
E. You may transfer the Programs and license them to another party only in connection with your
transfer of the single Product which was accompanied by the Programs to such other party.
At the time of such a transfer, you must also transfer all copies, whether in printed or machine
readable form, of every Program, and the related documentation, to the same party or destroy
any such copies not so transferred.
F. You may not remove any copyright, trademark or other notice or product identification from the
Programs and you must reproduce and include any such notice or product identification on
any copy of any Program.
Appendix
YOU MAY NOT REVERSE ASSEMBLE, REVERSE COMPILE, OR MECHANICALLY OR ELECTRONICALLY TRACE THE PROGRAMS, OR ANY COPY THEREOF, IN WHOLE OR IN PART.
YOU MAY NOT USE, COPY, MODIFY, ALTER, OR TRANSFER THE PROGRAMS OR ANY
COPY THEREOF, IN WHOLE OR IN PART, EXCEPT AS EXPRESSLY PROVIDED IN THE LICENSE.
IF YOU TRANSFER POSSESSION OF ANY COPY OF ANY PROGRAM TO ANOTHER PARTY,
EXCEPT AS PERMITTED IN PARAGRAPH E ABOVE, YOUR LICENSE IS AUTOMATICALLY
TERMINATED.
31
LIMITED USE LICENSE AGREEMENT
TERM
This license is effective only for so long as you own or lease the Product, unless earlier terminated. You may terminate this license at any time by destroying, at your expense, the Programs and
related documentation together with all copies thereof in any form. This license will also terminate
effective immediately upon occurrence of the conditions thereof set forth elsewhere in this Agreement, or if you fail to comply with any term or condition contained herein. Upon any such termination, you agree to destroy, at your expense, the Programs and related documentation together
with all copies thereof in any form.
YOU ACKNOWLEDGE THAT YOU HAVE READ THIS AGREEMENT, UNDERSTAND IT AND
AGREE TO BE BOUND BY ITS TERMS AND CONDITIONS. YOU FURTHER AGREE THAT IT
IS THE COMPLETE AND EXCLUSIVE STATEMENT OF THE AGREEMENT BETWEEN US,
WHICH SUPERSEDES ANY PROPOSAL OR PRIOR AGREEMENT, ORAL OR WRITTEN, AND
ANY OTHER COMMUNICATIONS BETWEEN US, RELATING TO THE SUBJECT MATTER OF
THIS AGREEMENT.
Appendix
GOVERNMENT RESTRICTED RIGHTS.
The Software is provided with “RESTRICTED RIGHTS.” Use duplication or disclosure by the
government is subject to restrictions as set forth in FAR52.227-14 and DFAR252. 227-7013 et
seq. or their successors.
Use of the Software by the government constitutes acknowledgement of Intel’s proprietary rights
therein.
Contractor or Manufacturer is Intel Corporation, 2200 Mission College Blvd., Santa Clara, CA
95052.
32
Contrat de licence d’usage limité
Le(s) logiciel(s) (les “Logiciels”) fournis avec ce produit Panasonic (le “Produit”) sont exclusivement concédés en licence à l’utilisateur ultime (“vous”), et ils ne peuvent être utilisés que conformément aux clauses contractuelles cidessous. En utilisant les logiciels, vous vous engagez de
manière définitive à respecter les termes, clauses et conditions des présentes.
Panasonic Corporation a mis au point ou obtenu les Logiciels et vous en concède l’utilisation
par les présentes. Vous assumez l’entière responsabilité du choix de ce Produit (y compris des
Logiciels associés) pour obtenir les résultats escomptés, ainsi que de l’installation, de l’utilisation
et des résultats obtenus.
Licence
A. Panasonic Corporation vous octroie par les présentes le droit et la licence personnels, non
cessibles et non exclusifs d’utiliser les Logiciels conformément aux termes, clauses et conditions de ce contrat. Vous reconnaissez ne recevoir qu’un droit limité d’utiliser les Logiciels et
la documentation les accompagnant et vous vous engagez à n’obtenir aucun droit de titre,
propriété ni aucun autre droit vis-à-vis des Logiciels et de la documentation les accompagnant
ni vis-à-vis des algorithmes, concepts, dessins, configurations et idées représentés par ou
incorporés dans les Logiciels et la documentation les accompagnant, dont les titres, propriété
et droits resteront tous à Panasonic Corporation ou à leurs propriétaires.
B. Vous ne pouvez utiliser les Logiciels que sur le Produit unique qui est accompagné par les
Logiciels.
C. Vous et vos employés ou agents êtes requis de protéger la confidentialité des Logiciels. Vous
ne pouvez ni distribuer ni mettre les Logiciels et la documentation les accompagnant à la
disposition d’un tiers, par partage de temps ou de quelque autre manière que ce soit, sans
l’autorisation écrite préalable de Panasonic Corporation.
D. Vous ne pouvez ni copier ni reproduire ni permettre la copie ni la reproduction des Logiciels
ni de la documentation les accompagnant pour quelque fin que ce soit, à l’exception d’une (1)
copie des Logiciels à des fins de sauvegarde uniquement pour soutenir votre utilisation des
Logiciels sur le Produit unique qui est accompagné par les Logiciels. Vous ne pouvez ni modifier ni tenter de modifier les Logiciels.
E. Vous ne pouvez céder les Logiciels et en octroyer la licence à une autre partie qu’en rapport
avec votre cession du Produit unique qui est accompagné par les Logiciels à cette autre partie. Au moment de cette cession, vous devez céder également toutes les copies, que ce soit
sous forme imprimée ou lisible par la machine, de tous les Logiciels ainsi que de la documentation les accompagnant, à la même partie ou détruire les copies non cédées.
Appendix
F. Vous ne pouvez retirer aucune marque de droits d’auteur, marque de commerce ou autre ni
aucune identification de produit des Logiciels et vous devez reproduire et inclure toutes ces
notices ou identifications de produit sur toutes les copies des Logiciels.
Vous ne pouvez assembler en sens inverse, compiler en sens inverse ni retracer les Logiciels ni
aucune de leurs copies, de façon électronique ou mécanique, en tout ou en partie.
Vous ne pouvez utiliser, copier, modifier, altérer ni céder les Logiciels ni aucune de leurs copies,
en tout ou en partie, à l’exception de ce qui est expressément stipulé dans ce contrat.
Si vous cédez la possession de toute copie ou de tout Logiciel à une autre partie, à l’exception de
ce qui est autorisé au paragraphe E ci-dessus, votre licence est automatiquement résiliée.
33
Contrat de licence d’usage limité
Termes, clauses et conditions
Cette licence n’est effective que pour la durée de possession ou de crédit-bail du Produit, à
moins d’une résiliation antérieure. Vous pouvez résilier cette licence à tout moment en détruisant,
à vos frais, les Logiciels et la documentation les accompagnant avec toutes leurs copies, sous
quelque forme que ce soit. Cette licence sera également résiliée, avec application immédiate, si
les conditions de résiliation définies ailleurs dans ce contrat se sont réalisées ou si vous ne respectez pas les termes, clauses et conditions qui y sont contenues. Au moment de la résiliation,
vous acceptez de détruire, à vos frais, les Logiciels et la documentation les accompagnant avec
toutes leurs copies, sous quelque forme que ce soit.
Appendix
Vous reconnaissez avoir lu ce contrat, en avoir compris toute la substance et avoir accepté de
respecter ses termes, clauses et conditions. Vous reconnaissez en outre qu’ils sont la description
complète et exclusive du contrat conclu entre nous, contrat qui remplace et annule toute proposition ou contrat précédent, écrit ou oral, et toute autre communication entre nous, relativement à
l’objet du présent contrat.
34
Specifications
This page provides the specifications for the basic model.
The model number is different according to the unit configuration.
l To check the model number:
Check the bottom of the computer or the box the computer came in at the time of purchase.
l To check CPU speed, memory size and the hard disk drive (HDD) size:
Run the Setup Utility (è
Reference Manual “Setup Utility”) and select [Information] menu.
[Processor Speed]: CPU speed, [Memory Size]: Memory size, [Hard Disk]: Hard disk drive
size
n Main Specifications
CPU
Intel® Core™ i5-5300U Processor (3 MB*1 cache, 2.3 GHz up to 2.9 GHz)
with Intel® Turbo Boost Technology
Chip Set
Built-in CPU
Video controller
Intel® HD Graphics 5500 (Built-in CPU)
Main Memory*2
4 GB*1 / 8 GB*1, DDR3L SDRAM (16 GB*1 Max.)
Storage
Quick Release Drive: 500 GB*3 (Hard disk drive) / 256 GB*3 (SSD)
<For boot drive>
Approx. 18 GB*3 is used as a partition with disk recovery tools. (Users
cannot use this partition.)
Approx. 1.2 GB*3 is used as a partition with system tools. (Users cannot
use this partition.)
Approx. 25 GB*3 is used as a partition with disk recovery tools. (Users
cannot use this partition.)
Approx. 300 MB*3 is used as a partition with system tools. (Users cannot
use this partition.)
Display Method
14.0” (16:9) HD (1366 × 768 dots)
14.0” (16:9) FHD (1920 × 1080 dots)
Internal LCD*4
Max. 16,777,216 colors
(1366 × 768 dots)
Max. 16,777,216 colors
(1920 × 1080 dots)
External Display (HDMI)*5
65,536 / 16,777,216 colors (1920 × 1200 dots Max.)
Wireless LAN
*6
Intel® Dual Band Wireless-AC 7265 (a/b/g/n/ac)
è page 37
LAN
IEEE 802.3 10Base-T / IEEE 802.3u 100BASE-TX / IEEE 802.3ab
1000BASE-T
Sound
WAVE and MIDI playback, Intel® High Definition Audio subsystem support
SD Memory Card Slot*8
×1
RAM Module Slot
(For extension)
× 1, DDR3L SDRAM, 204-pin, 1.35 V, SO-DIMM, PC3L-12800 Compliant
Interface
USB Ports (USB 3.0 ports × 3)*9 / LAN Port (RJ-45) × 1 / HDMI Port (Type
A)*10 / Headset (Miniature jack, 3.5 DIA, CTIA standard / Headphone: Impedance 32 Ω, Output Power 4 mW × 2, Stereo / Microphone: Monaural
Input) / Expansion Bus Connector (Dedicated 24-pin female)
Keyboard / Pointing Device
87 keys / Touchpad
Power Supply
AC adaptor or Battery pack
*11
AC Adaptor
Appendix
è page 37
Bluetooth*7
87 keys / Touchpad
<Only for model with touchscreen>
87 keys / Touchpad / Touchscreen
(Capacitive)
Input: 100 V - 240 V AC, 50 Hz/60 Hz, Output: 15.6 V DC, 7.05 A
35
Specifications
n Main Specifications
Battery Pack
Li-ion 10.8 V, Typical 4400 mAh / Minimum 4100 mAh
(with CF-VZSU0GW)
Li-ion 11.1 V, Typical 4200 mAh / Minimum 4080 mAh
(with CF-VZSU0PW)
Li-ion 10.8 V, Typical 3220 mAh / Minimum 3050 mAh
(with CF-VZSU0LW)
Operating Time*12 Approx. 11 hours (with CF-VZSU0GW/CF-VZSU0PW)
Approx. 9 hours (with CF-VZSU0LW)
Power Consumption*14
Approx. 65 W*15 / Approx. 110 W (maximum when recharging in the ON
state)
Physical Dimensions (W × D
× H) (including the carrying
handle)
345 mm × 272 mm × 29.8 - 39 mm {13.6" × 10.7" × 1.2 " - 1.54 "}
Weight
Approx. 1.99 kg {Approx. 4.39 lb.}
(with CF-VZSU0GW/CF-VZSU0PW)
Environment
Charging Time*13 Approx. 2.5 hours
-10 °C to 50 °C {14 °F to 122 °F} (IEC60068-2-1, 2)*16
Operating Temperature
Storage
Humidity
30 % to 80 % RH (No condensation)
Temperature
- 20 °C to 60 °C {-4 °F to 140 °F}
Humidity
30 % to 90 % RH (No condensation)
Approx. 2.10 kg {Approx. 4.63 lb.}
(with CF-VZSU0GW/CF-VZSU0PW)
nSoftware
Windows® 8.1 Pro Update 64-bit
Base OS
*17
Installed OS
Windows® 8.1 Pro Update 64-bit
Windows7® Professional 32-bit Service Pack 1 (downgraded to
Windows® 7)*18 / Windows7® Professional 64-bit Service Pack 1
(downgraded to Windows® 7)*18
Pre-installed Software
Adobe Reader, PC Information Viewer, Intel® PROSet/Wireless Software*19, Intel® PROSet/Wireless Software for Bluetooth® Technology*19,
Battery Recalibration Utility, Infineon TPM Professional Package*19 *20, Recovery Disc Creation Utility, Dashboard for Panasonic PC, Power Plan Extension Utility, Camera Utility*19, GPS Viewer*19, Manual Selector, Microsoft
Office Trial*21, Wireless Manager Mobile Edition*20 *22, Touch Screen Mode
Setting Utility*19, Concealed Mode Settings Utility, Intel® My WiFi Technology, Intel® WiDi, USB Charge Setting Utility, DDS EVE FA Standalone for
Panasonic*19*20
Wireless Toolbox, Camera for Panasonic PC*19
Appendix
Wireless Switch Utility, Wireless Connection Disable Utility*19 *20
Aptio Setup Utility, PC-Diagnostic Utility, Hard Disk Data Erase Utility*23
36
*6
n Wireless LAN
Data Transfer Rates
IEEE802.11a : 54 Mbps*24
IEEE802.11b : 11 Mbps*24
IEEE802.11g : 54 Mbps*24
IEEE802.11n*25 :HT20 = 150 Mbps
HT40 = 300 Mbps
IEEE802.11ac :VHT80 : 866.7 Mbps
VHT40 : 433.3 Mbps
Standard Supported
IEEE802.11a / IEEE802.11b / IEEE802.11g / IEEE802.11n / IEEE802.11ac
Transmission Method
OFDM system, DS-SS system
*7
nBluetooth
Bluetooth Version
4.0
Classic mode / Low Energy mode
Transmission method
FHSS system
Wireless Channels Used
Channels 1 to 79 / Channels 0 to 39
RF Frequency Band
2.402 GHz - 2.480 GHz
nOptional Devices
Storage
Onboard drive (Flash Memory Drive (SSD)):128 GB / 256 GB (M.2 basis)
Discrete Video Controller
*26
AMD FireProTM M5100
CD/DVD Drive
DVD MULTI Drive built-in,
Buffer underrun error prevention function: Supported
Further information, refer to
Reference Manual “CD/DVD Drive”
Wireless WAN*27
LTE compatible
GPS
Chip: u-blox M8
GPS/GLONASS/SBAS Support
2nd LAN
IEEE 802.3 10Base-T / IEEE 802.3u 100BASE-TX / IEEE 802.3ab
1000BASE-T
Security Chip*28
TPM (TCG V1.2 compliant)
PC Card Slot
× 1, Type I or Type II, Allowable current 3.3 V: 400 mA, 5 V: 400 mA
Smart Card Slot
×1
SIM Card Slot
×1
*9
×1
Rugged USB 2.0
*9
×1
Serial Port
× 1, Dsub 9-pin male
VGA Port
× 1, Mini Dsub 15-pin female
Fingerprint Reader
Array Size : -, Image Size : 200×400 pixels, Image Resolution : 508 DPI
Appendix
USB 2.0 port
Contactless Smart Card Reader RF frequency: 13.56 MHz, compatible with ISO14443 Type-A, ISO14443 Type-B
Camera*29
1920 × 1080 dots, 30 fps (Video), Stereo Microphone
Battery Pack 2
(CF-VZSU0KW)
Li-ion 11.1 V, Typical 2960 mAh / Minimum 2860 mAh
Operating Time*12
Approx. 18 hours (with CF-VZSU0GW/CF-VZSU0PW + CF-VZSU0KW)
Approx. 15 hours (with CF-VZSU0LW + CF-VZSU0KW)
Charging Time*13
Approx. 5 hours
(with CF-VZSU0GW/CF-VZSU0PW/CF-VZSU0LW + CF-VZSU0KW)
Built-in bridge battery (not replaceable) (For hot swap only)
37
Specifications
*1
1 MB = 1,048,576 bytes / 1 GB = 1,073,741,824 bytes
Memory size of the factory default depends on the model. You can physically expand the memory up to 8
GB, but the total amount of usable memory available will be less depending on the actual system configuration.
*3
1 MB = 1,000,000 bytes / 1 GB = 1,000,000,000 bytes. Your operating system or some application software will report as fewer GB.
*4
Depending on the OS settings.
*5
Selectable resolution depends on the specifications of the external display. Display may be impossible
using some connected external displays.
*6
Only for model with wireless LAN.
*7
Only for model with Bluetooth.
*8
This slot is compatible with UHS-Ⅰ/UHS-Ⅱ. Operation has been tested and confirmed using Panasonic
SD/SDHC Memory Cards with a capacity of up to 64 GB. Operation on other SD equipment is not guaranteed.
*9
Does not guarantee operation of all USB-compatible peripherals.
*10
Does not guarantee operation of all HDMI-compatible peripherals.
*11
<Only for North America>
The AC adaptor is compatible with power sources up to 240 V AC adaptor. This computer is supplied
with a 125 V AC compatible AC cord. 20-M-2-1
*12
Measured with LCD brightness : 60 cd/m2
Varies depending on the usage conditions, or when an optional device is attached.
*13
Varies depending on the usage conditions, CPU speed, etc.
*14
Approx. 0.5 W when the battery pack is fully charged (or not being charged) and the computer is off.
<When using with 115 V AC>
Even when the AC adaptor is not connected to the computer, power is consumed (Max. 0.15 W) simply
by having the AC adaptor plugged into an AC outlet.
*15
23-E-1
Rated power consumption. *16
Do not expose the skin to this product when using the product in a hot or cold environment.
(è OPERATING INSTRUCTIONS - Read Me First) When using in hot or cold environment, some peripherals may fail to work properly. Check the operation environment of the peripherals.
Using this product continuously in a hot environment will shorten the product life. Avoid use in these
types of environments. When using in low temperature environment, startup may become slow or battery
operation time may become short.
The computer consumes power when the hard disk is warming up during startup. Therefore, if you are
using battery power and the remaining power is low, the computer may not start up.
*17
Operations of this computer are not guaranteed except for the pre-installed OS and the OS which is
installed by using the hard disk recovery and the recovery disc.
*18
This system is preinstalled with Windows® 7 Professional software and also comes with a license for
Windows 8.1 Pro software. You may only use one version of the Windows software at a time. Switching
between versions will require you to uninstall one version and install the other version.
*19
Depending on the models, this application software is not installed.
*20
Must be installed before use.
*21
To continue using this software after the end of the trial, purchase a license by following the on-screen
instructions.
*22
For information on Wireless Manager, refer to the “Supplementary Instructions for Wireless Manager
mobile edition” by the following procedure.
A Perform either of the following procedures.
at the bottom left corner of the Desktop screen.
ŸRight-click
on the Start screen.
ŸClick
B Click [Run], input “c:\util\wlprjct\Supplementary Instructions.pdf” then click [OK].
Click
(Start) and input “c:\util\wlprjct\Supplementary Instructions.pdf” in [Search programs and files]
and press Enter .
*23
Perform on the recovery disc.
Appendix
*2
Alternatively perform on the hard disk recovery partition.
These are speeds specified in IEEE802.11a+b+g+n+ac standards. Actual speeds may differ.
*25
Available when set to “WPA-PSK”, “WPA2-PSK” or “none”.
Only available when HT40 enabled by the computer and access point which associated supports HT40.
*24
38
*26
Do not open the back cover. Removable By Trained Technician Only.
The specifications may differ depending on the model.
A SIM card (15 mm {0.59”} × 25 {0.98”} mm) must be inserted in the SIM card slot.
*27
*28
For information on TPM, refer to the Installation Manual of “Trusted Platform Module (TPM)” by the following procedure.
On the Start screen, click the [Manual Selector] tile, and select “Installation Manual for Trusted Platform
Module (TPM)”
Double-click [Manual Selector] on the desktop, and select “Installation Manual for Trusted Platform Module (TPM)”.
The specifications may differ depending on the model.
Depending on the specification of application software, the following cases may occur. In these cases,
select a smaller resolution.
- Cannot select a large resolution.
*29
- When selecting a large resolution, an error occurs.
Appendix
39
LIMITED WARRANTY
For U.S.A.
Panasonic System Communications Company of North America (PSCNA)
Computer Products - Worldwide Warranties
Section 1: Limited Warranty - Hardware
PSCNA, referred hereafter as “Panasonic” will repair the products listed below with new or rebuilt parts, free
of charge in a Global Panasonic designated service location for the period specified below from the date of
original purchase in the event of a defect in materials or workmanship. These warranties are extended solely
to the original purchaser. A purchase receipt or other proof of date of original purchase will be required
before warranty performance is rendered.
• Laptop PC (CF-##) – 3 Years
• Tablet PC (FZ-##) – 3 Years
• Ultra-Mobile (CF-U#/CF-H# Series) – 3 Years
• PDRC - LCD & Keyboard Assembly – 3 Years
Battery Warranty
Batteries supplied with the product are covered under the warranty for one (1) year from date of purchase,
except as excluded in Section 3. Batteries purchased separately are covered under the warranty for one (1)
year from the date of purchase. A replacement battery furnished under the product warranty is covered for
the remaining period of the one year warranty on the original or purchased battery.
Optional: Panasonic “Protection Plus” Warranty
Any unit for which the Panasonic “Protection Plus” warranty has been purchased will receive additional
coverage for any failure that occurs due to accidental damage. All other terms and conditions of the
standard warranty apply and this additional coverage will exist for the duration of the standard warranty
period of the unit. If an extended Protection Plus warranty program is purchased, coverage is extended to
the end of the last year of extended coverage purchased.
This warranty does not cover failures or defects that are caused by fire, intentional acts, loss, theft, improper
maintenance, modification or service by anyone other than the Panasonic National Service Center or a
Panasonic Authorized Service Provider, or damage that is attributable to acts of God. Cosmetic damage
that does not affect functionality is not covered. Cosmetic damage on units with hardware failures will be
repaired in accordance with the warranty terms. This warranty is extended solely to the original purchaser
on the unit serial number for which it was purchased. Complete unit replacement fulfills the full obligation
and is at the discretion of Panasonic and is limited to once during the coverage term. Maximum benefit is
limited to one replacement per coverage year of the Motherboard, LCD, Storage Drive, and Keyboard.
Wireless Module Warranty
Panasonic approved wireless modems installed in Panasonic brand computers and integrated by Panasonic
or an Authorized Panasonic Wireless Integrator are covered under the warranty for the remaining warranty
period of the device in which the modem is installed. For devices with less than three (3) months remaining
on the unit warranty, the wireless modem will be covered for a period of three (3) months from the date of
installation of the modem, covering only modem replacement or modem installation related issues.
Appendix
All modems must be approved by the wireless carrier prior to use. Any use or attempted use of a wireless
modem not approved and activated by the carrier for use on their network is strictly prohibited and is not
sanctioned or warranted by Panasonic and may result in legal action. In addition, all modems must be
approved by Panasonic as compatible with the device hardware before installation or use.
Panasonic’s sole responsibility for the warranty or technical support of the software required to install or
operate the modem is defined in Section 2 (Limited Software Warranty). Any attempted software installation
by anyone other than a Panasonic Authorized Wireless Integrator is not covered under warranty and may
result in service charges to re-image or replace the hard drive.
Installation or attempted installation by any party other than Panasonic or an Authorized Panasonic Wireless
Integrator is strictly not covered under the warranty and may void the computer warranty if damage results.
40
Options and Accessories Warranties
The below listed Panasonic brand or supplied options and accessories are covered under this limited
warranty for the period specified from the date of purchase or as specifically stated:
•
•
•
•
•
•
•
•
•
•
•
•
•
AC Adaptor / Power Cord – 3 Years
Memory Expansion Card (Panasonic Brand) – 3 Years
Car Mount - Docking Station PCB or Vehicle Docking Station – 3 Years
Desktop Port Replicator, I-O Box, Docking Cradle (like CF-U1) – 3 Years
Antenna Pass-through Cable – 3 Years
Backlit or Full-sized keyboard - 3 Years or assumes warranty of the unit in which it is installed
Integrated Panasonic supplied options and kits including, but not limited to Wireless Modems, Media
Bay Drives (Floppy, CD, DVD, Combo), Camera, GPS, Bluetooth, Smartcard Reader, Magnetic Card
Reader, Barcode Scanner, and Fingerprint Reader - 3 Years or assumes warranty period of the unit in
which it is installed provided the integration was performed by Panasonic or an Authorized Integrator.
Hard Drive / Solid State Drive (Internal) - 3 Years
Separately purchased 2nd Hard Drive – 1 Year
External USB Drives (CD / DVD / Floppy / Hard Drive) – 1 Year
Optional Battery – 1 Year
Battery Charger / Multi-Bay Battery Charger – 1 Year
Stylus Pens, Digitizer & Standard - 90 Days (physical damage excluded)
Section 2 - Limited Warranty - Software
Panasonic warrants to you only that the disk(s) or other media on which the Programs are furnished will
be free from defects in material and workmanship under normal use for a period of sixty (60) days from the
date of delivery thereof to you, as evidenced by your purchase receipt.
This is the only warranty Panasonic makes to you. Panasonic does not warrant that the functions contained
in the Programs will meet your requirements or that the operation of the Programs will be uninterrupted
or error free. Panasonic shall have no obligation for any defects in the disk(s) or other media on which
the Programs are furnished resulting from your storage thereof, or for defects that have been caused by
operation of the disk(s) or other media
Panasonic’s entire liability and your exclusive remedy under this warranty shall be limited to the
replacement, in the United States or other Panasonic designated location, of any defective disk or other
media which is returned to Panasonic’s Authorized Service Center, together with a copy of the purchase
receipt, within the aforesaid warranty period.
Section 3 - Limited Warranty Exclusions - Specifically excluded from the warranty are:
Appendix
• All consumable items; such as screen protection films, logo badges, labels, cleaning cloths, carry
cases, manuals, cables, straps, belts, holsters, tethers, and harnesses and any other options and
accessories not listed above or covered under a separate warranty.
• Failures related to the product operating system, hard drive or solid state drive image, software setup,
software program, virus, other program(s) or file(s) on any drive or in any computer memory location.
• Failures due to BIOS settings or changes, as well as any cosmetic or physical damage to the unit.
• Any unit or device with a missing or altered model number or serial number label
• Cosmetic damage or any damage which occurs in shipment
• Failures which are caused by products not supplied by Panasonic
• Failures which result from alteration, accident, misuse, introduction of liquid or other foreign matter into
the unit, abuse, neglect, installation, maladjustment of consumer controls, improper maintenance or
modification, use not in accordance with product use instructions
• Failures due to service by anyone other than a Panasonic Authorized Service Provider
• Failures caused by improper installation of options or accessories or due to integration by any
company other than Panasonic or a Panasonic Authorized Integrator
• Damage, failure, or loss due to the unit being stolen, lost, misplaced, or used by anyone other than the
original purchaser
• Damage that is attributable to acts of God
41
LIMITED WARRANTY
This limited warranty only covers failures due to defects in materials or workmanship which occur during
normal use. If a unit is sent to a Panasonic Authorized Service Center and no hardware failure is found,
the customer will be billed for labor to correct a software issue or reimage the hard drive plus shipping and
applicable administrative fees at the current rates set by the service provider.
THIS PRODUCT IS NOT INTENDED FOR USE AS OR PART OF NUCLEAR EQUIPMENT/SYSTEMS,
AIR TRAFFIC CONTROL EQUIPMENT/SYSTEMS, OR AIRCRAFT COCKPIT EQUIPMENT/SYSTEMS*1.
PANASONIC WILL NOT BE RESPONSIBLE FOR ANY LIABILITY RESULTING FROM THE USE OF THIS
PRODUCT ARISING OUT OF THE FOREGOING USES.
*1 AIRCRAFT COCKPIT EQUIPMENT/SYSTEMS include class 2 Electrical Flight Bag (EFB) Systems and
Class 1 EFB Systems when used during critical phases of flight (e.g., during take-off and landing) and/or
mounted onto the aircraft. Class 1 EFB Systems and 2 EFB Systems are defined by FAA: AC (Advisory
Circular) 120-76A or JAA: JAA TGL (Temporary Guidance Leaflets) No. 36.
Other Limits and Exclusions: There are no other express warranties except as listed above.
PANASONIC SHALL NOT BE LIABLE FOR LOSS OF DATA OR OTHER INCIDENTAL OR
CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF
ANY BREACH OF THIS WARRANTY. ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO
THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE. Some states do not allow the exclusion or
limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so
the above limitations or exclusions may not apply to you.
This limited warranty gives you specific legal rights, and you may also have other rights which vary from
state to state.
For technical support or to arrange for service on your Panasonic computer product, call our toll-free hotline
at 1-855-PSC-TECH (855-772-8324).
Appendix
DIAL TOLL FREE: 1-855-PSC-TECH (855-772-8324)
Web Site : www.panasonic.com/toughbook
42
For Canada
PANASONIC COMPUTER AND PERIPHERALS LIMITED WARRANTY
Coverage – Panasonic Canada Inc. (“PCI”) warrants to you, the first end user customer, this computer product (excluding software media), when purchased from PCI or from a PCI authorized reseller, to be free from
defects in materials and workmanship under normal use, subject to the terms set forth below, during the
period of warranty coverage specified.
Scope of Coverage
Period of Coverage
Type of Failure Coverage
• Laptop Computers (except Battery) and Three (3) Years from Date of Defective Materials or WorkAC Adaptor
Original End User Customer manship
• Factory/PCI installed options including
Purchase
Wireless WAN, GPS, Bluetooth, Finger
print reader, Backlit keyboard, Memory
Card and Media Bay Drives (Floppy, CD/
DVD)
•Ultra-Mobile PC
•Tablet PC
• Mobile Wireless Display
• PDRC – LCD and Keyboard Assemblies
• Port Replicator
• Hand-held Computers
•Battery
• Battery charger
• Auto Adaptor
• External USB Drives
One (1) Year from Date of
Defective Materials or WorkOriginal End User Customer manship
Purchase
•Standard or Digitizer Stylus Pen
Ninety (90) Days from Date
of Original End User Customer Purchase
Defective Materials or Workmanship
• All consumable items including protection No Coverage
film, cleaning cloth, carry case, tether
and harness
Remedy – In the event of a warranty claim, contact PCI’s representatives within the applicable warranty
period, identifying the nature of the defect claimed, at 1-800-668-8386 between 9:00 A.M. and 5:00 P.M.,
Eastern Time Zone, Mon. – Fri. (excluding holidays) for instructions on how to obtain service. A purchase
receipt or other proof of date of original purchase is required before warranty service is performed. Defective
parts covered by this Limited Warranty will be repaired or replaced with new or comparable rebuilt parts on
an exchange basis. Warranty replacement or repair is subject to the terms of this Limited Warranty for the
balance of the original period of warranty coverage.
Appendix
No Coverage – This Limited Warranty does not cover products purchased outside Canada. Neither does
it cover damage to, failure of, or defects in a product or accessory through mishandling, improper installation, abnormal use, misuse, neglect, accident, introduction of liquid or other foreign matter into the product,
alteration or servicing by anyone not authorized by PCI, or act of God.
THIS PRODUCT IS NOT INTENDED FOR USE AS, OR AS PART OF, NUCLEAR EQUIPMENT/SYSTEMS,
AIR TRAFFIC CONTROL EQUIPMENT/SYSTEMS, OR AIRCRAFT COCKPIT EQUIPMENT/SYSTEMS*2.
PANASONIC WILL NOT BE RESPONSIBLE FOR ANY LIABILITY RESULTING FROM THE USE OF THIS
PRODUCT ARISING OUT OF THE FOREGOING USES.
*2
AIRCRAFT COCKPIT EQUIPMENT/SYSTEMS include Class2 Electrical Flight Bag (EFB) Systems and
Class1 EFB Systems when used during critical phases of flight (e.g., during take-off and landing) and/or
mounted on to the aircraft. Class1 EFB Systems and 2 EFB Systems are defined by FAA: AC (Advisory
Circular) 120-76A or JAA: JAA TGL (Temporary Guidance Leaflets) No.36
IF YOU SHIP THE PRODUCT FOR WARRANTY SERVICE
Carefully pack the product, preferably in the original carton. Include details of defect claimed and proof of
date of original purchase. No liability is assumed for loss or damage to the product while in transit, if you
chose your own transportation carrier.
43
LIMITED WARRANTY
SOFTWARE MEDIA LIMITED WARRANTY
Coverage – PCI warrants to you, the first end user customer, that the disk(s) or other media on which software program(s) is/are supplied will be free from defects in materials and workmanship under normal use in
Canada for a period of sixty (60) days from date of receipt as evidenced by your purchase receipt for your
Panasonic Computer product.
THIS IS THE ONLY WARRANTY THAT PCI MAKES RESPECTING THE SOFTWARE MEDIA. PCI does not
warrant the software. Please refer to the software licensor’s written warranty (accompanying the copy of the
software) for any software warranty claim.
Claim Procedure – In the event of a defect in material or workmanship in the media during the sixty (60)
days warranty period, and you return it, transportation costs prepaid, to Panasonic Canada Inc., Computer
Products Marketing, 5770 Ambler Drive, Mississauga, Ontario L4W 2T3, within the warranty period, together
with a copy of your purchase receipt, and an explanation of the suspected defect, PCI will replace in Canada
the defective disk(s) or other media.
Remedy – PCI’s entire liability, and your only remedy for any breach of this software media warranty is limited to replacement of the media only. It does not cover any other damages, including, but not limited to, loss
of use or profit loss, or special, indirect or consequential damages, or other claims, whether or not of similar
character.
No Coverage – This limited warranty does not apply if the disk(s) or other media has been used in other
than a Panasonic product, or in environmental conditions other than those specified by PCI or the manufacturer, or if subjected to misuse, neglect, mishandling, modification or attempted modification of the program,
or if damaged by accident or act of God. PCI is not responsible for damage to or loss of any program, data
or removable storage media.
GENERAL
Appendix
NO OTHER WARRANTIES – PCI DISCLAIMS ALL OTHER WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, WITH RESPECT TO THE SOFTWARE, SOFTWARE MEDIA,
COMPUTER PRODUCT, OPTIONS AND ACCESSORIES.
NO LIABILITY FOR CONSEQUENTIAL DAMAGES – IN NO EVENT SHALL PCI BE LIABLE FOR ANY
SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING FROM ANY BREACH OF THE LIMITED
WARRANTIES SET OUT IN THIS DOCUMENT, OR FROM THE USE OF THE COMPUTER PRODUCT,
INCLUDING, WITHOUT LIMITATION, LOSS OF DATA, BUSINESS, PROFIT OR GOODWILL.
IN ANY EVENT, PCI’S MAXIMUM LIABILITY FOR ANY BREACH SHALL NOT EXCEED THE AMOUNT
ACTUALLY PAID BY YOU FOR THE COMPUTER PRODUCT.
NO ACTION, REGARDLESS OF ITS BASIS, MAY BE BEGUN AGAINST PCI MORE THAN TWO (2)
YEARS AFTER THE CAUSE OF ACTION AROSE.
Statutory Warranties – Some jurisdictions do not allow these limitations or exclusions, so they may not apply to you.
44
LIMITED WARRANTY (GARANTIE LIMITÉE)
Pour le Canada
GARANTIE LIMITÉE – ORDINATEURS ET PÉRIPHÉRIQUES PANASONIC
Couverture – Panasonic Canada Inc. (« PCI ») garantit à l’acheteur original que ce produit informatique (à
l’exclusion des supports des logiciels) est, au moment de sa vente par PCI ou d’un revendeur agréé par PCI, exempt de défauts de pièces et de fabrication dans les conditions normales d’utilisation, et ce, pendant la période
de couverture de la garantie, sous réserve des modalités décrites ci-dessous.
Éléments couverts
Durée de couverture
Type de couverture
• Ordinateurs blocs-notes (sauf batteries)
et adaptateur secteur
• Options installées en usine/par PCI
incluant : WAN sans fil, GPS, Bluetooth,
lecteur d’empreintes digitales, clavier
rétroéclairé, carte mémoire et lecteurs
(disquettes, CD/DVD)
•Ordinateurs personnels ultra-portables
•Ordinateurs tablettes
• Écran mobile sans fil
• Ensembles PDRC – ACL et clavier
• Duplicateur de port
Trois (3) ans à partir de la
date d’achat original.
Défauts de pièces et de fabrication
• Ordinateurs de poche
•Batterie
• Chargeur de batterie
• Adaptateur pour voiture
• Périphériques USB
Un (1) an à partir de la date Défauts de pièces et de fabricad’achat original.
tion
• Stylo pointeur standard ou pour numériseur graphique
Quatre-vingt-dix (90) jours à
partir de la date d’achat original.
Défauts de pièces et de fabrication
• Tous les articles consommables incluant les Aucune couverture
pellicules protectrices, chiffons de nettoyage, étuis de transport, longes et sangles
Appendix
Recours – Pour obtenir des informations sur la marche à suivre dans le cas où une réclamation en vertu de la
garantie deviendrait nécessaire, communiquez par téléphone avec un représentant de PCI au 1-800-668-8386,
entre 9h00 et 17h00 (heure de l’Est) du lundi au vendredi (sauf les jours fériés), avant l’échéance de la garantie
applicable, en prenant soin d’identifier la nature de la défaillance.
Un reçu ou toute autre pièce justificative de la date d’achat original sera exigé avant toute réparation. Toute
pièce défectueuse couverte par la présente garantie limitée sera réparée ou remplacée par une pièce neuve ou
remise à neuf. Le remplacement ou la réparation sera fait conformément aux modalités de la présente garantie
limitée pendant la durée restante de la période originale de la garantie.
Produits non couverts – La présente garantie limitée ne couvre pas les produits achetés à l’extérieur du
Canada. Elle ne couvre pas non plus les dommages, la défaillance ou les défauts attribuables à une manutention inadéquate, une mauvaise installation, une utilisation anormale ou abusive, de la négligence,
un accident, un déversement ou la pénétration d’un objet étranger, une modification, un cas fortuit ou une
réparation effectuée par une personne non agréée par PCI.
CE PRODUIT N’EST PAS DESTINÉ À ÊTRE UTILISÉ, EN TOUT OU EN PARTIE, COMME SYSTÈME/ÉQUIPEMENT
NUCLÉAIRE, SYSTÈME/ ÉQUIPEMENT DE CONTRÔLE DU TRAFFIC AÉRIEN OU SYSTÈME/ÉQUIPEMENT DE
POSTE DE PILOTAGE D’AVION*3. PANASONIC DÉCLINE TOUTE RESPONSABILITÉ CONCERNANT L’UTILISATION
DE CE PRODUIT DANS LES CAS SUSMENTIONNÉS.
*3
Les SYSTÈMES/ÉQUIPEMENTS DE POSTE DE PILOTAGE D’AVION sont dotés de systèmes OEPP
(organiseur électronique de poste de pilotage) de classe 2 et de classe 1 utilisés pendant des phases
critiques de vol (par exemple, pendant le décollage et l’atterrissage) et(ou) montés sur l’avion. Les
systèmes OEPP de classe 1 et de classe 2 sont définis par le circulaire d’information FAA: AC (Advisory
Circular) 120-76A ou le feuilet n° 36 JAA: JAA TGL (Temporary Guidance Leaflets) No 36.
EXPÉDITION DU PRODUIT POUR SERVICE SOUS GARANTIE
Emballez soigneusement le produit, de préférence dans son emballage d’origine. Joignez une description
de la défaillance de même qu’une pièce justificative de la date d’achat. Panasonic Canada Inc. ne peut
être tenue responsable pour tout dommage ou perte subi pendant le transport si vous avez choisi le transporteur.
45
LIMITED WARRANTY (GARANTIE LIMITÉE)
GARANTIE LIMITÉE – SUPPORTS DES LOGICIELS
Couverture – Panasonic Canada Inc. (« PCI ») garantit à l’acheteur original que la ou les disquettes ou tout
autre support sur lequel le ou les programmes sont fournis sont exempts de défauts de pièces et de fabrication dans des conditions normales d’utilisation au Canada, et ce, pour une période de soixante (60) jours
suivant la date de réception indiquée sur la preuve d’achat.
LA PRÉSENTE GARANTIE EST LA SEULE OFFERTE PAR PCI COUVRANT LES SUPPORTS DE
LOGICIELS. PCI ne garantit pas les logiciels. Reportez-vous à la garantie écrite du concédant de licence
d’utilisation du logiciel (qui accompagne la copie du logiciel) pour toute réclamation en vertu de la garantie.
Réclamation – marche à suivre – Panasonic Canada Inc. remplacera toute disquette ou support défectueux
si l’article en question est retourné, port payé, à son service de Marketing – produits informatiques, 5770 Ambler
Drive, Mississauga (Ontario) L4W 2T3, dans les soixante (60) jours suivant la date d’achat original. Joignez à votre
envoi une pièce justificative de votre achat et une description du problème.
Recours – La responsabilité de PCI - et votre seul recours - dans le cas de toute défaillance couverte par la
garantie sur ce support de logiciel est limitée au seul remplacement du support. Elle ne couvre aucun autre
dommage, y compris, mais non exclusivement, la perte d’usage ou de profits, ni aucun dommage spécial, indirect ou consécutif, ni aucune autre réclamation de nature similaire ou autre.
Produits non couverts – La présente garantie limitée ne s’applique pas si la ou les disquettes ou autre support
ont été utilisés dans un produit d’une marque autre que Panasonic ou dans des conditions environnementales
autres que celles spécifiées par PCI ou le fabricant, ou soumis à une mauvaise utilisation, à la négligence, à une
manutention inadéquate ou encore si le programme a été modifié ou subi une tentative de modification ou des
dommages attribuables à un accident ou à un cas fortuit. De plus, PCI n’assume aucune responsabilité pour toute
perte de, ou tout dommage à, un programme, des données ou un support de sauvegarde amovible.
GÉNÉRALITÉS
Appendix
PCI NE RECONNAÎT AUCUNE AUTRE GARANTIE, EXPLICITE OU IMPLICITE, Y COMPRIS, MAIS NON
EXCLUSIVEMENT, LES GARANTIES IMPLICITES DE VALEUR COMMERCIALE ET D’UTILITÉ À UNE FIN
QUELCONQUE, À L’ÉGARD DU LOGICIEL, SUPPORTS DE LOGICIELS, PRODUITS INFORMATIQUES,
PÉRIPHÉRIQUES ET ACCESSOIRES.
SOUS AUCUNE CIRCONSTANCE PCI NE POURRA ÊTRE TENUE RESPONSABLE DES DOMMAGES
SPÉCIAUX, INDIRECTS OU CONSÉCUTIFS ATTRIBUABLES À UN MANQUEMENT AUX GARANTIES
LIMITÉES DÉCRITES DANS LE PRÉSENT DOCUMENT OU À L’UTILISATION DU PRODUIT INFORMATIQUE, Y COMPRIS, SANS RESTRICTION, LA PERTE DE DONNÉES, D’AFFAIRES, D’ACHALANDAGE
OU DE PROFIT.
DANS TOUS LES CAS, LA RESPONSABILITÉ MAXIMALE DE PCI POUR TOUT MANQUEMENT NE
POURRA EXCÉDER LE PRIX DE VENTE DU PRODUIT INFORMATIQUE.
AUCUNE RÉCLAMATION, SANS ÉGARD À SES MOTIFS, NE POURRA ÊTRE FAITE AUPRÈS DE PCI
PLUS DE DEUX (2) ANS APRÈS LES FAITS INVOQUÉS À LA BASE D’UNE TELLE RÉCLAMATION.
Garantie statutaires – Certaines juridictions interdisent de telles limitations ou exclusions; aussi, pourraientelles ne pas s’appliquer.
46
For Australia
Personal / Notebook Computers - 36 Month Warranty from Date of Purchase
1.
Subject to the conditions of this warranty Panasonic or it’s Authorised Service Centre will perform
necessary service on the product without charge for parts or labour, if in the opinion of Panasonic, the
product is found to be faulty within the warranty period.
2.This warranty only applies to Panasonic products purchased in Australia and sold by Panasonic
Australia or its Authorised Distributors or Dealers and only where the products are used and serviced
within Australia or it’s territories. Warranty cover only applies to service carried out by a Panasonic
Authorised Service Centre and only if valid proof of purchase is presented when warranty service is
requested.
3.
This warranty only applies if the product has been installed and used in accordance with the
manufacturer’s recommendations (as noted in the operating instructions) under normal use and
reasonable care (in the opinion of Panasonic). The warranty covers normal domestic use only and does
not cover damage, malfunction or failure resulting from use of incorrect voltages, incorrect installation,
accident, misuse, neglect, build-up of dirt or dust, abuse, maladjustment of customer controls, mains
supply problems, thunderstorm activity, infestation by insects or vermin, tampering or repair by
unauthorised persons (including unauthorised alterations), exposure to abnormally corrosive conditions or
any foreign object or matter having entered the product.
4.This warranty does not cover the following items unless the fault or defect existed at the time of
purchase: Software
5.Warranty on Toughbook accessories (stylus, pens, AC charger, combo drive, etc) is 12 Months from the
date of purchase & 3 months for batteries.
6.To claim warranty service, when required, you should:
Check the Panasonic web site for latest warranty contact
http://www.panasonic.com/au/business/computers-tablets-and-pos/toughbook.html, use the Service
Centre Locator and call the National Service Centre number indicated.
Prepare purchase receipt as proof of purchase date and system serial number which will be required by
the Authorised Service Centre.
7.The Warranty excludes 3 or less faulty pixels on screen.
8.The Warranty includes the repair or exchange of faulty parts within the product with items that are
functionally equivalent to that as originally supplied or better – including new or refurbished parts or
units – solely at Panasonic’s discretion.
9.It is the customer’s responsibility to backup all data from the hard disk drive before sending equipment
for repair. If a problem is related to the hard disk drive, or the hard disk drive has to be replaced,
Panasonic will only reload the factory pre-installed software for the product onto the replacement drive.
10.Panasonic will arrange free pick up and return for approved warranty repairs within 50 km of capital city
locations. Please ensure your unit is properly packed for return to the service location.
11.The warranties hereby conferred do not extend to, and exclude, any costs associated with the
installation, de-installation or re-installation of a product, including costs related to the mounting,
demounting or remounting of any screen, (and any other ancillary activities), delivery, handling,
freighting, transportation or insurance of the product or any part thereof or replacement of and do not
extend to, and exclude, any damage or loss occurring by reason of, during, associated with, or related
to such installation, de-installation, re-installation or transit.
Appendix
In addition to your rights under this warranty, Panasonic products come with consumer guarantees that
cannot be excluded under the Australian Consumer Law. If there is a major failure with the product, you can
reject the product and elect to have a refund or to have the product replaced or if you wish you may elect
to keep the goods and be compensated for the drop in value of the goods. You are also entitled to have the
product repaired or replaced if the product fails to be of acceptable quality and the failure does not amount
to a major failure.
If there is a major failure in regard to the product which cannot be remedied then you must notify us within
a reasonable period by contacting the Panasonic Customer Care Centre. If the failure in the product is not
a major failure then Panasonic may choose to repair or replace the product and will do so in a reasonable
period of time from receiving notice from you.
47
LIMITED WARRANTY
THIS PRODUCT IS NOT INTENDED FOR USE AS OR AS PART OF NUCLEAR EQUIPMENT/SYSTEMS,
AIR TRAFFIC CONTROL EQUIPMENT/SYSTEMS, OR AIRCRAFT COCKPIT EQUIPMENT/SYSTEMS*4.
PANASONIC WILL NOT BE RESPONSIBLE FOR ANY LIABILITY RESULTING FROM THE USE OF THIS
PRODUCT ARISING OUT OF THE FOREGOING USES.
*4
AIRCRAFT COCKPIT EQUIPMENT/SYSTEMS include Class 2 Electrical Flight Bag (EFB) Systems and
Class 1 EFB Systems when used during critical phases of flight (e.g., during take-off and landing) and/or
mounted onto the aircraft. Class 1 EFB Systems and 2 EFB Systems are defined by FAA: AC (Advisory
Circular) 120-76A or JAA: JAA TGL (Temporary Guidance Leaflets) No.36.
THIS WARRANTY CARD AND THE PURCHASE DOCKET (OR SIMILAR PROOF OF
PURCHASE)
SHOULD BE RETAINED BY THE CUSTOMER AT ALL TIMES
If you require assistance regarding warranty conditions or any other enquiries, please visit the
Panasonic Australia website
http://www.panasonic.com/au/business/computers-tablets-and-pos/toughbook.html or
contact by phone on 1300 132 463
Panasonic Australia Pty. Limited
ACN 001 592 187 ABN 83 001 592 187
1 Innovation Road, Macquarie Park NSW 2113
www.panasonic.com.au
Appendix
PRO-031-F05 Issue: 4.0
48
11-11-2011
Panasonic System Communications Company of North America
Two Riverfront Plaza
Newark, NJ 07102
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga,
Ontario L4W 2T3
Panasonic Australia Pty. Limited
ACN 001 592 187 ABN 83 001 592 187
1 Innovation Road, Macquarie Park NSW 2113
© Panasonic Corporation 2015
HS0115-0
P-2014-0643