Transcript
Wow Grip Mouse Operating Manual Part no 440-WP13 Package contains. 1 x Wow Grip Mouse 1 x Mini USB reciever 1 x Charge cable INTRODUCTION Wow-Pen Joy wireless is an ergonomic grip mouse designeed to reduce pain from extended computer usage. INSTALLATION 1. Put the mini USB reciever in any available USB port on your computer. Your PC should automatically prompt you that it has recognized the Wow-Pen Joy and notify you that it is ready for use. 2. Start the mouse by turning the switch on the switch underneath, a red light should be seen from the sensor diod. 3. It’s fully plug-and-play so it should be ready for use. WOW GRIP MOUSE USAGE Operation: Battery charge: Connect charge cable from mouse to computer. Left click button Wheel & Middle button Back button Forward button Right click button • Resolution: 800/1000/1200 dpi Change resolution by clicking right button and wheel simultaneous. • Weight 110 g • Cable length 90 cm. To change resolution of sensor, click right button and wheel simultaneous. w w w . k o n d a t o r. s e QUESTIONS? CONTACT US. Kondator AB, Sweden. tel +46-8-556 595 00 e-mail [email protected] • Power supply charging: 5 V DC from USB port • Battery capacity 450 mAh (Built-in) • Dimensions: Wide 82 mm x Length 100 mm x Height 80 mm • 5 button mouse (1 scroll wheel) • Wireless frequency; 2.4 GHz • Part no 440-WP13