Transcript
VESA Counter Stand - Fixed Height with Cable Management (P/N:MMF-STND02-04) Quick Installation Instructions INSTALLATION Basic Overview Tilt Capability 1. Remove stand from packaging box. Place on top of counter or if desired, firmly secure the base by bolting three(3) screws from the bottom of a flat counter surface through the base plate . (Screws are not included as they need to suit your specific desktop or platform thickness) . 2. Mount any 10”-22” LCD Monitor, touch screen , or All-InOne Monitor to stand by aligning the VESA Pattern Holes (75mm x 75mm or 100mm x 100mm ) on back of LCD or case to the stand’s mounting plate. 3. Adjust the stand’s tilt adjustment as desired. 4. Guide cable connections down and out through the cable opening. 5. Make cable connections as needed. VESA Mounting Plate Clearance Cable Slot Side View Back View SPECS Base: Suitable for any 10”-22” LCD Monitor, Clearance Cable Slot Under-counter Mounting Holes All-In-One Monitor Weight Capacity: 45 lbs Overall Height : 9.05 inch high Construction: ABS and sheet-nickel TOOLS AND HARDWARE REQUIRED Finish: UV Paint- Sandblast • NO other hardware or tools are included for mounting stands to a surface. Hardware will need to suit your specific desktop or platform thickness. Cable Management: Designed with opening for easy and convenient cable access and routing. Color: Black Front View • Phillips Head Screwdriver or power drill will be required to mount stand to surface (if necessary). For additional accessories and other mounting solutions, contact your supplier or visit our website at www.mmfpos.com Counter Stand (PN: MMF-STND02-04) Inst. Sheet (5-28-2013) MMF POS, WHEELING, IL