Transcript
VESA Counter Stand – Flex Height Z-Shape (P/N:MMF-STND01-04) Quick Installation Instructions INSTALLATION 1. Remove stand from packaging box. Place on top of counter or if desired, firmly secure the base by bolting four (4) screws from the bottom of a flat counter surface through the base plate . (Screws are not included as they need to suit your specific desktop or platform thickness) . 2. Remove the plastic cover from behind the VESA Mounting Plate. 3. Mount any 10”-22” LCD Monitor, All-In-One Monitor, or Touch Screen to stand by aligning the VESA Pattern Holes (75mm x 75mm or 100mm x 100mm ) on back of monitor to the stand’s metal mounting plate. 4. Replace the back plastic cover to the Metal VESA Mounting plate by securing the four screws provided in kit. 5. Adjust the stand’s tilt adjustment as desired. 6. Make cable connections as needed. Basic Overview VESA Mounting Plate Tilt Capability Flexible Height Under Counter Mounting Holes are located under Base Front View Back View SPECS Base: Suitable for any 10”-22” LCD Monitor, All-In-One Monitor Weight Capacity: 45 lbs Overall Height : up to 11.75” high TOOLS AND HARDWARE REQUIRED • NO other hardware or tools are included for mounting stands to a surface. Hardware will need to suit your specific desktop or platform thickness. Construction: ABS and sheet-nickel Finish: UV Paint- Sandblast • Phillips Head Screwdriver or power drill will be required to mount stand to surface (if necessary). Color: Black For additional accessories and other mounting solutions, contact your supplier or visit our website at www.mmfpos.com VESA Counter Stand - (MMF-STND01-04) Inst. Sheet (5-28-2013) COPYRIGHT BY MMF POS , WHEELING, IL