Download Miele G 5620 SC dishwasher

At the end of the programme
Switching off
If O Finished or AutoOpen appears in
the display, and the door has opened
slightly, this indicates that the
programme has finished.
At the end of a programme:
^ Open the door completely to
re-engage the door closing
The drying fan will continue to run
for a few minutes at the end of the
Quick wash programme.
^ Switch the dishwasher off using the
On/Off button K.
The dishwasher will continue to use
electricity until it is switched off with
the On/Off button K.
If the dishwasher is not going to be
used for a longer period of time, e. g.
whilst on holiday, the stopcock should
be closed.
You can now empty the dishwasher.
,If you have deactivated the auto-
matic door opening function (see
"Settings menu, AutoOpen"), but
would still like to open the door at
the end of the programme, then
make sure that you open the door
fully. Otherwise steam from the
dishwasher could damage the edge
of the worktop because the fan is no
longer running.
Unloading the dishwasher
Dishes tend to break and chip more
easily when they are hot.
Allow the dishes to cool until they are
comfortable enough to handle before
unloading them.
If you open the door fully after switching
off, the dishes will cool much faster.
First unload the lower basket, then the
upper basket and finally the cutlery tray
(depending on model).
This will prevent water drops from the
upper basket and cutlery tray from
falling onto the dishes in the lower